• 한국자원식물학회:학술대회논문집
• /
• 한국자원식물학회 2020년도 추계국제학술대회
• /
• pp.62-62
• /
• 2020

Ginseng is a shade-plant cultivated using shading facilities. However, at too low light levels, root growth is poor, and at high light levels, the destruction of chlorophyll reduces the photosynthesis efficiency due to leaf burn and early fall leaves. The ginseng has a lightsaturation point of 12,000~15,000 lux when grown at 15 to 20℃ and 9,500 lux at 25℃. This study was conducted to select the optimal light intensity of 3-year-old ginseng grown in blue-white film plastic house. The seeds were planted in the blue-white film plastic house with different light receiving rate (March 17, 2020). Between April and September, the average air temperature in the house was 20.4-20.7℃. Average soil temperature was 18.3℃-18.5℃. The chemical properties of the test soil was as follows. The pH level was 7.0-7.4, EC was 0.5-0.6 dS/m, OM was at the levels of 33.6-37.7 g/kg, P₂O₅ was 513.0-590.8 mg/kg, slightly higher than the allowable 400 mg/kg. The amount of light intensity, illuminance, and solar radiation in the blue-white film house was increased as the light-receiving rate increased and the amount of light intensity was found to be 9-14% compared to the open field, 8-13% illuminance and 9-14% solar irradiation respectively. The photosynthesis rate was the lowest at 3.1 µmolCO²/m²/s in the 9% light blue-white plastic house and 4.2 and 4.0 µmolCO²/m²/s in the 12% and 14% light blue-white plastic house, respectively. These results generally indicate that the photosynthesis of plants increases with the amount of light, but the ginseng has a lower light saturation point at high temperatures, and the higher the amount of light, the lower the photosynthetic efficiency. The SPAD (chlorophyll content) value decreased as the increase of light-receiving rate, and was the highest at 32.7 in 9% light blue-white plastic house. Ginseng germination started on April 11 and took 13-15 days to germinate. The overall germination rate was 82.9-85.8%. The plant height and length of stem were long in the 9% light-receiving plastic house. The diameter of stem was thick in the 12-14% light-receiving plastic house. In the 12% and 14% light-receiving plastic house, the length and diameter of taproot was long and thick, so the fresh weight of root per plant was 20 g or more, which was heavier than 16.9 g of the 9% light-receiving plastic house. The disease incidence (Alternaria blight, Gray mold and Damping-off etc.) rate were 0.9-2.7%. The incidence of Sclerotinia rot disease was 7.5-8.4%, and root rot was 0-20.0%. The incidence ratio of rusty root ginseng was 34.4-38.7% level, which was an increase from the previous year's 15% level.

• 전자공학회논문지 IE
• /
• 제45권1호
• /
• pp.7-14
• /
• 2008

본 논문에서는 상용 TFT-LCD 빔 프로젝터를 이용하여 XGA급($1024{\times}768$) 초고해상 공간 광변조기(SLM)를 구현하고 광세기 및 위상변조 특성을 분석하였다. 즉, 상용 빔 프로젝터의 광학 모듈, 프로젝션 램프 및 팬들을 제거한 후 이를 효과적으로 보상할 수 있는 전자회로를 설계 제작 및 추가하여 관련 모듈제거 이전과 동일한 환경을 만들어 줌으로써 XGA급 초고해상 공간 광 변조기를 구현하였다. 구현된 초고해상 TFT-LCD 공간 광 변조기의 특성을 실험한 결과, 그레이 준위에 따른 선형적인 광 세기 및 위상변조 특성을 측정하였고 이를 분석한 결과 현재 상용화되어 있는 고가의 공간 광 변조기와 비교하여 높은 해상도와 위상변조 특성에 대한 우수한 선형성을 확인함으로서 저가의 고해상 공간 광 변조기의 구현은 물론, 이를 통한 광 정보처리 및 3D 디스플레이 시스템 또는 공간 주파수 필터 등의 입력 소자로서의 이용 가능성을 제시하였다.

• Journal of Microbiology and Biotechnology
• /
• 제30권3호
• /
• pp.417-426
• /
• 2020

Bacillus amyloliquefaciens is an important plant disease-preventing and growth-promoting microorganism. B. amyloliquefaciens WS-8 can stimulate plant growth and has strong antifungal properties. In this study, we sequenced the complete genome of B. amyloliquefaciens WS-8 by Pacific Biosciences RSII (PacBio) Single Molecule Real-Time (SMRT) sequencing. The genome consists of one chromosome (3,929,787 bp) and no additional plasmids. The main bacteriostatic substances were determined by genome, transcriptome, and mass spectrometry data. We thereby laid a theoretical foundation for the utilization of the strain. By genomic analysis, we identified 19 putative biosynthetic gene clusters for secondary metabolites, most of which are potentially involved in the biosynthesis of numerous bioactive metabolites, including difficidin, fengycin, and surfactin. Furthermore, a potential class II lanthipeptide biosynthetic gene cluster and genes that are involved in auxin biosynthesis were found. Through the analysis of transcriptome data, we found that the key bacteriostatic genes, as predicted in the genome, exhibited different levels of mRNA expression. Through metabolite isolation, purification, and exposure experiments, we found that a variety of metabolites of WS-8 exert an inhibitory effect on the necrotrophic fungus Botrytis cinerea, which causes gray mold; by mass spectrometry, we found that the main substances are mainly iturins and fengycins. Therefore, this strain has the potential to be utilized as an antifungal agent in agriculture.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.843-846
• /
• 2004

For the fast growing Liquid Crystal Display (LCD) TV market, it is essential to make the LCD panels to show moving images without any visual difficulties such as blurring or tailing. Owing to reduction of the cell gap and the improved Liquid Crystal (LC) mixtures with low viscosity, it is possible that our S-IPS TFT-LCDs feature a response time (R/T) as fast as 1-frame time (16ms) for a white-black operation and less than a 16rns in all gray levels without Over Driving Circuit (ODC) technology. Currently, mass production of the large size IPS panels with high speed has been successfully achieved. In order to achieve faster response time, new LC mixtures have been developed, optimizing the physical properties of rotational viscosity (${\gamma}$1) and elastic constants (Kii). Also, the LC mixtures with high elastic constant allow us to increase the cell gap. In this paper, realization of fast switching time in IPS mode with optimized '${\gamma}$1/Kii' parameter in the LC mixtures forms the core of this paper.

• 한국축산식품학회지
• /
• 제38권2호
• /
• pp.362-375
• /
• 2018

This study proposed a rapid microscopic examination method for pork freshness evaluation by using the self-assembled hyperspectral microscopic imaging (HMI) system with the help of feature extraction algorithm and pattern recognition methods. Pork samples were stored for different days ranging from 0 to 5 days and the freshness of samples was divided into three levels which were determined by total volatile basic nitrogen (TVB-N) content. Meanwhile, hyperspectral microscopic images of samples were acquired by HMI system and processed by the following steps for the further analysis. Firstly, characteristic hyperspectral microscopic images were extracted by using principal component analysis (PCA) and then texture features were selected based on the gray level co-occurrence matrix (GLCM). Next, features data were reduced dimensionality by fisher discriminant analysis (FDA) for further building classification model. Finally, compared with linear discriminant analysis (LDA) model and support vector machine (SVM) model, good back propagation artificial neural network (BP-ANN) model obtained the best freshness classification with a 100 % accuracy rating based on the extracted data. The results confirm that the fabricated HMI system combined with multivariate algorithms has ability to evaluate the fresh degree of pork accurately in the microscopic level, which plays an important role in animal food quality control.

• 한국생활과학회지
• /
• 제18권1호
• /
• pp.247-257
• /
• 2009

The purpose of this study was to examine the effects of interior color and product volume of clothing shop on consumer's store image and preference for a clothing shop. The research methodology was a survey questionnaire and the subjects were 516 university students in Daejeon, Korea. The measuring instruments were stimuli and self-administrated questionnaire. The stimuli were 7 pictures of clothing shop including interior color and product volume variables, and the self-administrated questionnaire consisted of semantic differential scales for store image, store preference, and subject's demographic attribution. The data were analyzed by t-test, ANOVA, MANOVA, Duncan's multiple range test, based on SPSS program The results were as follows: first, in clothing shop's interior colors affecting store image and preference for clothing shop, white color gave a casual, sophisticated, characteristic, and attractive image to the shops, and brown color gave an elegant, sophisticated image, while black color gave a sophisticated, uncomfortable image, and gray color gave a less positive image to them than other colors. Subjects preferred white, brown, and black color in the order. Second, clothing shop's products volume also affected consumers' store image and preference. Its small volume gave a more sophisticated, elegant image than other volume levels, and subjects preferred small and medium volume of clothing products to their large volume. Third, the effects of shop's interior color and clothes' product volume on store image were different depending on subject's sex. The results revealed that clothing shop's interior color and product volume are important VMD components affecting consumer's store image and preference, and consumer's sex has to be considered to understand the effects of VMD components on clothing shop image.

• Pediatric Infection and Vaccine
• /
• 제10권1호
• /
• pp.114-122
• /
• 2003

본 저자들은 상기도 감염 후 발열과 배뇨곤란, 하지의 근력저하를 주소로 내원한 7세 환아에서, 급성 횡단성 척수염 증상으로 시작하여 의식 변화와 호흡부전의 급성 파종성 뇌척수염으로 진행한 1례에서 enterovirus 71을 증명하고 고용량 methylprednisolone 정주 후 증상의 호전을 경험하였기에 문헌 고찰과 함께 보고하는 바이다.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제30권7_8호
• /
• pp.773-779
• /
• 2003

얼굴 영역의 정확한 위치를 정확히 찾는 것은 얼굴 인식을 위한 핵심적인 전처리 과정이다. 본 논문에서는 조명조건, 표정, 배경의 변화에 무관하게 얼굴의 구성요소를 검출할 수 있는 강건한 기법을 제안한다. 수평 방향의 상대적으로 어두운 화소값을 갖는 눈썹, 눈, 입 둥과 같은 독립된 얼굴 요소를 검출하기 위해 형상 분해 국부 최적 임계치 기법을 적용하며 얼굴을 구성하는 간단한 기하학적 조건을 만족하는 얼굴 요소의 그룹을 검색함으로써 순수 얼굴영역을 검출한다. AR-face 데이타베이스의 영상에 적용한 결과, 두꺼운 안경테에 의해 눈썹이 가리워진 특수한 경우를 제외한 거의 모든 영상에 대해 정확한 얼굴 영역을 검출할 수 있었고, 얼굴의 대칭성을 이용해 회전과 이동 변화를 보상할 수 있으므로 강건한 얼굴 인식의 전처리 과정으로 사용할 수 있다.

• 대한전자공학회논문지SP
• /
• 제37권4호
• /
• pp.1-10
• /
• 2000

디지털 영상 출력 장치를 위해 연속 계조 영상을 이진 영상으로 변환하는 오차확산 방법은 사람의 시각 특성에 적합한 고주파 성분의 이진 영상을 만들어 내지만 균일하지 못한 점의 분포로 인해 영상의 화질을 저하시키는 패턴이 발생하게 된다. 이러한 단점을 해결하기 위해 다양하게 개선된 오차확산 방법들이 제안되었다. 본 논문에서는 우선 오차확산 방법이 균일한 점의 분포를 발생시키지 못하는 원인을 분석하고 주기함수를 이용하여 이진 문턱값을 조절함으로서 이진 영상의 점의 분포를 균일하게 하여 화질을 향상시키는 방법을 제안한다. 제안하는 방법은 이진 영상의 화질을 결정하는 소수 화소(minor pixels)가 주어진 계조에 따라 일정한 주거리(principal distance)를 갖도록 하여 이진 화소의 뭉침 현상이나 공백 현상을 최소화 하고 균일한 분포를 갖도록 한다.

• 제어로봇시스템학회논문지
• /
• 제17권12호
• /
• pp.1203-1209
• /
• 2011

In this paper, the degradation evaluation method of VLC (Visible Light Communication) wireless module after high dose rate gamma-ray irradiation using the thermal infrared camera is proposed. First, the heating characteristics of the active devices embedded in the VLC wireless module during the condition of normal operation is monitored by thermal infrared camera. By the image processing technique, the trends of the intensity of the heat emitted by the active devices are calculated and stored. The feature of the blob area including the area of the active devices in the thermal infrared image is extracted and stored. The feature used in this paper is the mean value of the gray levels in the blob area. The same VLC module has been gamma irradiated at the dose rate of about 4.0 kGy/h during 72 hours up to a total dose of 288 kGy. And then, the heating characteristics of the active devices embedded in the VLC wireless module after high dose gamma ray irradiation is observed by thermal infrared camera. The high dose gamma-ray induced degradation of the active devices embedded in the VLC module was evaluated by comparing the mean value of the blob area to the one of the same blob area of the VLC module before the gamma ray irradiation.