• 대한기계학회논문집B
• /
• 제23권1호
• /
• pp.123-130
• /
• 1999

The objective of the current study is to understand steady 3-dimensional flow phenomena in a bifurcated duct experimentally. A bifurcation model is fabricated with transparent acrylic resin to visualize the whole flow field with the PIV system. The gray level cross-correlation method is applied to the image processing algorithm. The subpixel and the area interpolation methods are used to obtain the final velocity vectors. The finite volume predictions are used to analyze the flow patterns in the bifurcation model. The results of the computer simulation and the PIV experiment for three-dimensional flow show the recirculation zone and the formation of the paired secondary flow distal to the apex of the bifurcation model. The results obtained with the two methods also show that the branch flow strongly strikes the inner wall due to the inertial effect and accompanied helical motion as it flows toward the outer wall.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제30권12호
• /
• pp.1247-1254
• /
• 2003

현재 경동맥 내막절제술 시행을 위한 경동맥 협착증의 정도 측정에는 디지털감산조영술(DSA), 회전조영술(rotational angiography), 컴퓨터단층조영술(CTA) 및 자기공명조영술(MRA)로부터 얻어진 경동맥의 투영 영상을 이용하여 북미, 유럽 표준 및 총경동맥 방법이 사용되고 있다. 본 논문에서는 기존의 기계적인 측경기를 이용하는 전형적인 경동맥 협착 측정 방법의 단점을 극복하고, 측정자간의 변화율을 최소화하기 위해 자기공명조영술의 단면 영상을 사용하고 컴퓨터화한 새로운 협착증 정도 측정 방법을 개발하였다. 영상 분할에 사용되는 방법중 가장 널리 사용되고 효율적인 명암값 임계치 방법을 사용하여 경동맥 및 동맥의 내강을 분할하였다. 또한, 각 증례의 측정된 총경동맥의 혈관두께를 사용하여 분할된 경동맥으로부터 혈관을 제거 하였고, 혈관이 제거된 경동맥을 혈류 영역과 플라그 영역으로 분할하였다. 각 단면 영상에서의 경동맥 협착증 정도 측정은 (분할된 플라그 영역/혈류영역 및 플라그를 합한 면적) * 100% 식으로 계산된다.

• 대한기계학회논문집B
• /
• 제27권5호
• /
• pp.543-552
• /
• 2003

The effects of a directionally emitting and reflecting dielectric surface on the wall heat flux and medium temperature distribution are studied. The system is an infinite square duct enclosing an absorbing and emitting medium. The emissivity and reflectivity of opaque and gray wall vary with direction. Combined effect of conductive and radiative heat transfer is analyzed using finite difference and the direct discrete-ordinates method. The parameters under study are conduction to radiation parameter, optical depth, refractive index ratio. The results with directional and diffuse properties deviate each other when the conduction to radiation parameter is less than around 0.01. The wall heat flux differs fur optical thickness less than around 0.1. However, the medium temperature profiles differ for optical thickness greater than around 1. Deviations from diffuse property calculations are larger for hot wall with directional property than cold wall with directional property. As n increases from 1.5, the trend changes are observed fur refractive index ratio about n=6.10

• 대한기계학회논문집B
• /
• 제25권10호
• /
• pp.1451-1458
• /
• 2001

The effects of a specularly reflecting surface on the wall heat flux and medium temperature distribution are studied. The system is an infinite square duct enclosing an absorbing and emitting medium. The walls are opaque, and black or gray. The walls emit diffusely but reflect diffusely or speculary. Heat is transferred by the combined effect of conduction and radiation. The radiative heat transfer is analyzed using direct discrete-ordinates method. The parameters under study are conduction, to radiation parameter, optical depth, wall emissivity, and reflection characteristics. The specular reflection and diffuse reflection show sizeable differences when the conduction to radiation parameter is less than around 0.01. The differences appear only either on the side wall heat flux or on the medium temperature profiles for the range of this study. The differences on the side wall heat flux are observed for optical thickness less than around 0.1 However the differences on the medium temperate profiles are found for optical thickness greater than around 1. The difference increase with increasing reflectance. The specular reflection increases the well heat flux gradient along the side wall.

• 한국안전학회지
• /
• 제15권1호
• /
• pp.19-27
• /
• 2000

This paper numerically deals with combined heat transfer in a enclosure with a block. The block affected by hot wall is located centrally in the enclosure with a radiating gray gas. The discrete ordinate method(DOM) was used for solving the radiative transfer equation. Both laminar and turbulent cases were investigated for various Rayleigh number and standard k-$\varepsilon$ model was adopted to turbulent case. The effects of optical thickness, wall emissivity and fluid-solid thermal conductivity ratio are investigated on the flow and temperature fields. This study shows that as the wall emissivity decreases, the temperature distribution gradually becomes uniform and the heat transfer is reduced in enclosure. It is expected that this study can help to design the energy system related to the combined heat transfer and operate it safely.

• 대한기계학회논문집
• /
• 제11권2호
• /
• pp.331-344
• /
• 1987

본 연구에서는 직사각형 밀폐공간내에서 자연대류와 복사의 상호 영향에 대해 서 P-1 근사를 이용하여 수치적으로 해석하였다.밀폐공간내에서의 온도분포, 속도 분포 및 열전달계수를 구하였으며 열경계층내에서의 전도와 복사의 상호 영향에 대하 여 고찰하였다. 표면 복사만이 존재하는 경우에 대해서도 고찰함으로써 P-1 근사의 적용한계를 규명하였다. 벽면을 산광 방사 및 반사체(diffuse emitter and reflec- tor)로, 기체는 회색체(gray body)로 가정하였다. 이는 복사 물성치의 파장에 따른 변화를 고려할 때의 대단히 복잡한 계산 과정을 피할 수 있고, 현재의 이론적 수준에 비추어 복사 열전달의 열향을 정성적으로 규명하는데 타당한 가정이다.

• Journal of Mechanical Science and Technology
• /
• 제16권12호
• /
• pp.1725-1732
• /
• 2002

Combined convection and radiation heat transfer in a circular tube with circumferential fins and circular disks is investigated for various operating conditions. Using a finite volume technique for steady laminar flow, the governing equations are solved in order to study the flow and temperature fields. The P- 1 approximation and the weighted sum of gray gases model (WSGGM) are used for solving the radiation transport equation. The results show that the total Nusselt number of combined convection and radiation is higher than that of pure convection. If the temperatures of the combustion gas and the wall in a tube are high, radiation becomes dominant. Therefore, it is necessary to evaluate the effect of radiation on the total heat transfer.

• 대한설비공학회지:설비저널
• /
• 제17권4호
• /
• pp.435-441
• /
• 1988

The purpose of this study is to apply the zone method expressions for a gray, absorbing, emitting, and linearly anisotropic scattering medium enclosed in an infinite plane layer to evaluate heat transfer applications. The medium is assumed to be homogeneous and has a refractive index of unity. The boundary surfaces are opaque and gray, diffusely emitting and reflecting at a constant temperature. Radiative equilibrium condition, combined conductive and radiative heat transfer, and thermal ignition are studied in terms of the governing parameters, and the results are compared with previous studies. Wall heat flux results agree well with those of others. Except for the minor discrepancies observed for some cases, temperature results also agree well with those of previous studies. Good agreement with results from other methods indicates the accuracy of the zone method as well as its compatibility with other modes of heat transfer.

• Journal of Information Processing Systems
• /
• 제15권1호
• /
• pp.34-46
• /
• 2019

A method for detecting foreign substances in mould based on scatter grams was presented to protect moulds automatically during moulding production. This paper proposes a wavelet transform foreign detection method based on Monte Carlo analysis mechanism to identify foreign objects in the tube. We use the Monte Carlo method to evaluate the image, and obtain the width of the confidence interval by the deviation statistical gray histogram to divide the image type. In order to stabilize the performance of the algorithm, the high-frequency image and the low-frequency image are respectively drawn. By analyzing the position distribution of the pixel gray in the two images, the suspected foreign object region is obtained. The experiments demonstrate the effectiveness of our approach by evaluating the labeled data.

• 한국농촌건축학회논문집
• /
• 제14권4호
• /
• pp.97-105
• /
• 2012

Winsborough Hall built by Martin L. Winehart who was the missionary of the Presbyterian Church of America in 1927 was built by Mrs. Winsborough's birthday contribution. Winsborough Hall was clearly divided into the original form built in 1927 and remodelled form by extension. Most of walls were constructed with several kinds of bricks for both sides and opening in the original form and remodelled form. Each room divided by inner wall was kept with original form because it is difficult to remodel it on the characteristics of building. But, it was confirmed through the related literatures that security of opening at some rooms and annexation of rooms through removal of the wall on the 2nd floor which was relatively easy to transform wall compared to the first floor were made. Variability of the wall affected the truss structure of roof and it created rare double truss structure. Architectural value of Winsborough Hall was in its first architectural trial using red brick in Gwangju region since 1920s. It suggested that it was differential architectural trial from Korean-Western mixed building constructed by the missionaries from 1940 to 1910 and buildings made of gray bricks prevailed from 1911 to 1920 and it showed the advancement in the architectural structure and materials.