• Proceedings of the IEEK Conference
• /
• 2002.06d
• /
• pp.307-310
• /
• 2002

Color reproductions in most ink jet printer are quite different from that of standard CRT (cathode ray tube) monitor display because of the nonlinear characteristic in subtractive color reproduction. Gray scale CCT(correlated color temperature) reproductions in a typical printer are vary with the input RGB level. A simple method for making constant gray scale CCT and gamma value in photo paper is proposed in this paper. The compensation of the CCT with white point of the photo paper under the CIE standard illuminant D65 and color correction has been confirmed using the LUT(look-up table) to compensate the CCT and gamma curve characteristic.

• Proceedings of the IEEK Conference
• /
• 2000.09a
• /
• pp.705-708
• /
• 2000

일반적인 LCD의 색 재현 특성은 입력 디지털 값이 낮을수록 gray scale의 상관색온도가 상승하여 정확한 색 재현이 불가능하다. 본 논문에서는 LCD의 입력 디지털 값의 변화에 따른 특성을 조사하고, luminance, contrast 비 등의 특성에 열화없이 gray scale의 입력 잘 변화에 따른 상관색온도의 변화를 보정하기 위해서 입력 디지털 값을 조정하는 새로운 LUT를 제안하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.76-79
• /
• 2007

Optical compensation films are widely used to enlarge viewing angle characteristics for LCDs. A new surface film with an inner light scattering layer was newly developed to improve gray scale inversion. This paper describes technologies regarding these films that enhance the viewing angle characteristics for LCDs.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.520-523
• /
• 2007

In this paper, we present a novel method to minimize flicker and gray scale errors automatically across the entire panel by using a compensation of the gray levels of image. It was realized by image simulation with feedback structure. As a result of simulation, we observed flickers from the simulated image. And we compensated the gray scale levels for original image. The compensated gray scale levels correspond to flickers which are generated by difference of pixel voltage in odd and even frame. And we simulated repetitively the compensated image by our block diagram for reduction flicker. Consequently, we confirmed flickers have been decreased more than 87%. Furthermore, our method provides visualization and valid prediction for improvement of TFT-LCD panel

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1996.06c
• /
• pp.773-779
• /
• 1996

Dried oak mushroom have complex and various visual features. Grading and sorting of dried oak mushrooms has been done by the human expert. Though actions involved in human grading looked simple, a decision making underneath the simple action comes from the result of the complex neural processing of the visual image. Through processing details involved in human visual recognition has not been fully investigated yet, it might say human can recognize objects via one of three ways such as extracting specific features or just image itself without extracting those features or in a combined manner. In most cases, extracting some special quantitative features from the camera image requires complex algorithms and processing of the gray level image requires the heavy computing load. This fact can be worse especially in dealing with nonuniform, irregular and fuzzy shaped agricultural products, resulting in poor performance because of the sensitiveness to the crisp criteria or specific ules set up by algorithms. Also restriction of the real time processing often forces to use binary segmentation but in that case some important information of the object can be lost. In this paper, the neuro net based real time recognition algorithm was proposed without extracting any visual feature but using only the directly captured raw gray images. Specially formated adaptable size of grids was proposed for the network input. The compensation of illumination was also done to accomodate the variable lighting environment. The proposed grading scheme showed very successful results.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1383-1385
• /
• 2008

In the viewing-angle image control (VIC) technology, one pixel is made up of a quad pixel structure which is consisting of R, G, B, and electrically control briefringence (ECB) sub-pixels. Two types of test stimuli were used; text & complex image respectively. The limitations of those methods were found from the experiment. From the results the advanced GC technology was proposed.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1398-1400
• /
• 2005

A novel data driver for passive matrix organic lightemitting devices (PM-OLEDs) with high gray scale images was designed. The proposed circuit consisted of a main current bias circuit as well as sample & hold circuits in each channel of the data driver to compensate a current offset. These results indicate that a data driver designed by using the current offset compensation technique holds promise for poten tial applications in PM-OLED displays with high gray scale images.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.8
• /
• pp.459-466
• /
• 2014

Fading effect of old pictures and printings is shown up differently according to the ink property, temperature, humidity, illuminants, and so on. Faded image enhancement techniques based on illuminant estimation are proposed such as the gray world algorithm and white patch retinex methods. However, conventional simple operators are not suitable for enhancing faded images because partial fading effect is appeared differently. Thus, this paper presents a color enhancement algorithm based on integrating correction coefficients for faded images. First, the proposed method adopts local process by using multi-scale average mask. The coefficients for each multi-scale average mask are obtained to apply the gray world algorithm. Then, integrating the coefficients with weights is performed to calculate correction ratio for red and blue channels in the gray world assumption. Finally, the enhanced image is obtained by applying the integrated coefficients to the gray world algorithm. In the experimental results, the proposed method reproduces better colors for both wholly and partially faded images compared with the previous methods.

• Korean Journal of Remote Sensing
• /
• v.13 no.2
• /
• pp.133-150
• /
• 1997

The purpose of this paper is to develop an algorithm of classification and interpretation of seafloor based on side scan sonar data. The algorithm consists of mosaicking of sonar data using navigation data, correction and compensation of the acouctic amplitude data considering the charateristics of the side scan sonar system, and segmentation of the seafloor using digital image processing techniques. The correction and compensation process is essential because there is usually difference in acoustic amplitudes from the same distance of the port-side and the starboard-side and the amplitudes become attenuated as the distance is increasing. In this paper, proposed is an algorithm of compensating the side scan sonar data, and its result is compared with the mosaicking result without any compensation. The algorithm considers the amplitude characteristics according to the tow-fish's depth as well as the attenuation trend of the side scan sonar along the beam positions. This paper also proposes an image segmentation algorithm based on the texture, where the criterion is the maximum occurence related with gray level. The preliminary experiment has been carried out with the side scan sonar data and its result is demonstrated.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.45 no.1
• /
• pp.1-10
• /
• 2008

Coloriztion algorithms, which hide color information into gray images and find them to recover color images, have been developed recently. In these methods, it is important to minimize the loss of original information while the color components are embedded and extracted. In this paper, we propose a colorization method using a wavelet packet transform in order to embed color components with minimum loss of original information. In addition, the compensation processing of color saturation in the recovered color images is achieved. In the color-to-gray process, an input RGB image is converted into Y, Cb, and Cr images, and a wavelet packet transform is applied to the Y image. After analyzing the amounts of total energy for each sub-band, color components are embedded into two sub-bands including minimum amount of energy on the Y image. This makes it possible not only to hide color components in the Y image, but to recover the Y image with minimum loss of original information. In the gray-to-color process, the color saturation of the recovered color images is decreased by printing and scanning process. To increase color saturation, the characteristic curve between printer and scanner, which can estimate the change of pixel values before and after printing and scanning process, is used to compensate the pixel values of printed and scanned gray images. In addition, the scaling method of the Cb and Cr components is applied to the gray-to-color process. Through the experiments, it is shown that the proposed method improves both boundary details and color saturation in the recovered color images.