• E2M - 전기 전자와 첨단 소재
• /
• 제8권5호
• /
• pp.633-639
• /
• 1995

Dropouts in magnetic media are a primary quality deficiency which is detrimental to magnetic signal quality and thus the major impediment to error-free recording, especially in high density digital recorders. The specific form of defects and causes found to be responsible for signal dropouts occurring in magnetic tape were studied. Dropout occurred when the RF signal falls to low level due to the various types of surface defects. However, the fall in the level of the RF signal in gravure roll coated tapes was most often caused by foreign particles adhering to the magnetic tape. It was also shown from the present study that scattered particles trapped under the tape surface or put on the top can lift it as it crosses the head, creating a spherical tent shaped defect and causing a temporary signal drop. Dropout producing substances were identified through optical and microchemical analyses. The results were correlated with measured electrical signal losses combined with analytical microscopy to clarify source identification of defects.

• 한국인쇄학회지
• /
• 제30권3호
• /
• pp.45-56
• /
• 2012

Printing technology is accepted by appropriate technology that smart phones, tablet PC, display(LCD, OLED, etc.) precision recently in the electronics industry, the market grows, this process in the ongoing efforts to improve competitiveness through the development of innovative technologies. So printed electronics appeared by new concept. This technology development is applied on electronic components and circuits for the simplification of the production process and reduce processing costs. Low-temperature process making possible for widening, slimmer, lighter, and more flexible, plastic substrates, such as(flexible) easily by forming a thin film on a substrate has been studied. In the past, the formation of the electrode used a screen printing method. But the screen printing method is formation of fine patterns, high-speed printing, mass production is difficult. The roll-to-roll printing method as an alternative to screen printing to produce electronic devices by printing techniques that were used traditionally in the latest technology and processing techniques applied to precision control are very economical to implement fine-line printing equipment has been evaluated as. In order to function as electronic devices, especially the dozens of existing micro-level of non-dot print fine line printing is required, the line should not break at all, because according to the specifications required to fit the ink transfer conditions should be established. In this study of roll-to-roll printing conductive paste suitable for gravure offset printing by developing Ag paste for forming fine patterns to study the basic physical properties with the aim of this study were to.

• 대한기계학회논문집A
• /
• 제34권3호
• /
• pp.263-271
• /
• 2010

e-Printing은 전통 인쇄 기술을 기반으로 하는 전자소자를 생산하기위한 새로운 기술이다. 이러한 인쇄 전자 소자들은 가격을 낮추기 위하여 대면적 인쇄가 요구된다. 이렇듯 원가를 절감하며 전자 소자에 요구되는 정밀도를 충족하기 위하여 롤투롤(Roll to Roll) 방식의 그라비아(Gravure) 인쇄 시스템이 하나의 대안으로 제시된다. 그라비아 인쇄에는 인쇄 전자 소자의 성능에 영향을 미치는 요소들이 매우 많다 : 건조 방식, 건조 온도, 운전 장력, 인쇄 속도, 잉크 점도, 잉크의 전도성, 망점 및 패턴의 정밀도. 이상에서 언급한 요소들은 각각 매우 밀접한 관계를 가지고 있다. 따라서 인쇄 전자소자의 성능을 향상시키기 위해서는 반듯이 인쇄 적합조건을 찾아야만 한다. 본 논문에서는, 전도성 잉크 및 그라이아 인쇄기를 사용하여 다양한 요소의 조건을 변화하여 패턴(선 및 면)을 인쇄하였으며, 각 인쇄 요소의 변화가 인쇄 전자소자의 성능에 미치는 영향에 관하여 분석 및 연구를 수행하였다.

• International Journal of Precision Engineering and Manufacturing
• /
• 제3권1호
• /
• pp.26-32
• /
• 2002

Laser direct patterning of the coated photoresist (PMER-NSG31B) layer was studied to make halftone dots on the gravure printing roll. The selective laser hardening of the photoresist by Ar-ion laser(wavelength: 333.6∼363.8 nm) was controlled by the A/O modulator. The coating thickness in the range of 5∼11㎛ could be obtained by using the up-down directional moving device along the vertically located roll. The width, thickness and hardness of the hardened lines farmed under the laser power of 200∼260mW and irradiation time of 4.4∼6.6 $\mu$ sec/point were investigated after developing. The hardened width increased as the coating thickness increased. Though the hardened thickness was changed due to the effect of the developing solution, the hardened layer showed good resistance to the scratching of 2H pencil. Also, the hardened minimum line width of 10㎛ could be obtained. The change of line width was also found after etching, and the minimum line widths of 6㎛ could be obtained. The hardened lines showed the good resistance to the etching solution. Finally, the experimental data could be applied to make gravure halftone dots using the developed imaging process, successfully.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.645-646
• /
• 2013

• 한국정밀공학회지
• /
• 제27권9호
• /
• pp.7-10
• /
• 2010

Recently, roll-to-roll printers are being developed actively by various research teams such as research institutes, universities and companies for the application of printed electronics. The printing methods that are widely used in the roll-to-roll printing equipments are gravure, gravure and flexo, which depend on the inks used and electronic devices produced. In general, a single printing unit of roll-to-roll printing equipment adopts only one printing method and this method is not changeable, which limits the application fields of the developed printing equipments. In this paper, the roll-to-roll printer, in which the printing unit has the novel design concept, is described.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 춘계학술대회 논문집
• /
• pp.473-474
• /
• 2012

• 기계와재료
• /
• 제22권3호
• /
• pp.30-35
• /
• 2010

최근 전자소자의 제조공정에 있어서 인쇄전자를 적용하여 고가이면서 화학물질이 많이 배출되는 기존의 제조공정을 대체하기 위한 연구가 활발하게 이루어지고 있다. 인쇄전자를 적용하기 위해서는 기존 공종 대비 생산비의 절감과 대량생산을 요구하고 있으며, 그 요구를 만족시킬 수 있는 인쇄전자 기술로는 롤투롤(R2R, Roll to Roll) 인쇄방식이 대표적이라 할 수 있다. 롤투롤 인쇄방식과 그라비아(Gravure)/그라비아옵셋(Gravure offset) 인쇄방법을 적용하면 낮은 비용으로 대량의 전자소자 생산에 쉽게 접근 할 수 있다. (주)펨스는 인쇄전자 기술의 활성화를 위하여 롤투롤-그라비아/그라비아옵셋 인쇄를 적용한 인쇄전자소자용 인쇄, 코팅장비를 개발 제작하고 있다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 춘계학술대회 논문집
• /
• pp.967-968
• /
• 2008

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.873-878
• /
• 2007

Stability of high-speed roll-to-roll printing machines is one of the most important factors that are required for the printing machines to operate properly and to obtain reasonable printing performance. This paper proposes a new model for the web-tension system of a high-speed gravure printing machine considering span-length variations due to dancer rollers, and analyzes the stability of plant dynamics of the printing machine using the proposed model. Span-length variations due to dancer motions are considered for the modeling of plant dynamics in two ways; one is to include the effect of span-length variations without considering dancer inertias and viscous frictions, and the other is to include the effect of span-length variations with considering dancer inertias and viscous frictions. The stability of the plant model is analyzed for various web-speeds using the eigenvalues of the linearized model about operating points.