• Food Science and Biotechnology
• /
• 제15권6호
• /
• pp.860-865
• /
• 2006

The quality parameters of sponge cake supplemented with soy protein concentrate (SPC) were evaluated. The addition of SPC to wheat flour increased the protein content and alkaline water retention value, but decreased the sedimentation value. Protein content had a positive correlation with the alkaline water retention value, and a negative correlation with the sedintentation value. The higher the concentration of SPC, the higher the RVA pasting temperature and the lower the viscosity. Increasing the level of SPC in flour led to a decrease in mixogram peak time, whereas peak height, width at peak, and width at 8 min progressively increased. As the amount of SPC increased in the formulation, the pH and specific gravity of cake batter increased, whereas the volume and specific volume of sponge cake decreased. The total isoflavones content in SPC increased after heat treatment. The hardness, gumminess, and chewiness increased progressively in accordance with increasing level of SPC.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
• /
• pp.648-653
• /
• 2003

Optimized recovery of heavy minerals from the near shore sands of Korean Yellow Sea was investigated using physical processing technologies such as gravity concentration and magnetic separation. The head samples were subjected to the three stages effective separation; Head sample was first treated by a spiral separator to recover rough heavy mineral concentrates, which are contained minerals like ilmenite, zircon and rare earth minerals. Much higher beneficiation processes were subsequently taken by wilfley table and magnetic separation according to their magnetic field responses. Heavy minerals were effectively recovered by wilfley table and subsequent recleaning of heavy minerals by magnetic separations was conducted. Qualitative and relative-quantitative analyses of their constituent elements were doing using XRD and XRF.

• 한국세라믹학회지
• /
• 제48권2호
• /
• pp.189-194
• /
• 2011

Metallurgical grade silicon was recovered from slurry waste for ingot sawing process by acid leaching and thermal treatment. SiC abrasive was removed by gravity concentration and centrifugation. Metal impurities were removed by the acid leaching using HF/HCl. The remaining SiC was separated by the thermal treatment at $1600^{\circ}C$ in an inert atmosphere by the difference in melting points. The purity of the obtained silicon was found to be around 99.7%.

• 한국군사과학기술학회지
• /
• 제11권3호
• /
• pp.169-175
• /
• 2008

A fine carbon fibers dispersion model is implemented to calculate the scattering range and ground level concentration of carbon fibers emitted at certain altitudes of atmospheric boundary layer. This carbon fibers dispersion model was composed by coupling a commonly used atmospheric dispersion model and an atmospheric boundary layer model. The atmospheric boundary layer model, applying the Monin-Obukov Similarity Rule obtained from measurement input data at ground level, was used to create the atmospheric boundary layer structure. In the atmospheric dispersion model, the Lagrangian Particle Model and the Markov Process were applied to calculate the trajectory of scattered carbon fibers relative to gravity and aerodynamic force, as well as carbon fibers specification.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.37-44
• /
• 2000

Numerical investigation is made to study the effects of natural convection on the formation of macrosegregation of a Pb-Sn alloy solidification process in a 2-D confined rectangle mold. The governing equations are calculated using previous continuum models with SIMPLE algorithm doring the solidification process. In addition. to track the solid-liquid interface with time variations. the moving boundary condition Is adopted and irregular interface shapes are treated with Boundary-Fitted Coordinate system. As the temperature reduce from the liquidus to the solidus, the liquid concentration of Sn. the lighter constituent, increases. Then the buoyancy-driven flow due to temperature and liquid composition gradients, called thermosolutal convection or double diffusion, occurs in the mushy region and forms the complicated macrosegregation maps. Related to this phnomena, effects on the macrosegregation formation depending on the cooling condition and gravity values are described.

• 대한기계학회논문집B
• /
• 제25권10호
• /
• pp.1337-1345
• /
• 2001

Numerical investigation is made to study the effects of thermosolutal convection on the formation of macrosegregation in a Pb-Sn alloy solidification process in a two dimensional confined rectangluar mold. The basic equations are sovled using the Contrinum Model theory with the SIMPE algorithm during the solidification process. In addition, to track the liquid-solid interface with time variations, the moving boundary condition was adopted and moving irregular interface shapes were treated with the time-dependent, boundary-fitted coordinate system. As the temperature reduces from the liquidus to the solidus, the liquid concentration of Sn, the lighter constituent, increases. Then the buoyancy-driven flow due to temperature and liquid composition gradients occurs in the mushy region and forms the complicated macrosegregation maps. belated to this phenomena, effects on the macrosegregation formation depending on the cooling condition and gravity values are examined.

• 한국양식학회지
• /
• 제16권4호
• /
• pp.203-209
• /
• 2003

Nitrification efficiency of fixed film biofilters with sand, loess bead, and styrofoam bead in biofilter columns of 1-m height and 30 cm width was studied. Synthetic wastewater was continuously supplied to the culture tank to maintain total ammonia nitrogen (TAN) concentration in the inflow water at around 8 mg/L. The hydraulic loading rate was set at 200 ㎥/$m^2$/day. TAN conversion was stabilized after about 90 day conditioning for all the selected filter media but with net accumulations of nitrite. On the volumetric basis, conversion rates of TAN and nitrite were the highest in styrofoam bead filter. Mean volumetric TAN conversion rates in the final samples were 682, 269, and 79 g TAN/㎥/day in the styrofoam bead, sand and loess bead filters, respectively. Low gravity and cost of styrofoam bead render the handling easier and more cost-effective.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.373-374
• /
• 2005

NaOCl (Sodium hydrochlorite) have similar smell of chloride and solution of straw color. And boiling point is $110^{\circ}C$, specific gravity is 1.0(50g/l)/1.1(100g/l), Value of pH is 12. NaOCl playa role as bleach, a oxidizer, a germicide, a decolorant, a deodorant, treatment of water supply and drainage, food addition agent because strong oxidation, bleaching, sterilization effect is had. When NaOCl is produced in electrolysis of seawater, this system is composed of injection system by directly electrolysis of salt water on the spot and sodium hydrochlorite generate a safe low concentration(0.4~0.8 %).

• 한국식생활문화학회지
• /
• 제27권1호
• /
• pp.89-94
• /
• 2012

This study was conducted to evaluate the effects of sweet pumpkin (Cucurbita Maxima D.) powder on the quality characteristics of cookies. The cookies were made with various sweet pumpkin powder levels (10%, 20%, and 30%). The pH of the dough increased while the density of the dough decreased as the amount of sweet pumpkin powder increased. The width of cookies determined by water content in dough increased with increasing sweet pumpkin powder level. The L value of cookies was significantly the largest in the control group. The b value was the highest for the 30% substituted sample group. According to textural measurements, the hardness, cohesiveness, springiness, and brittleness of the cookies with sweet pumpkin powder were higher in concentration than those of the control group. According to the sensory evaluation, the appearance, color, flavor, and texture of cookies with 10-20% sweet pumpkin powder were higher compared to those of the control group. The overall most acceptable cookie group was that with 10% added sweet pumpkin powder.

• 한국측량학회지
• /
• 제37권6호
• /
• pp.417-426
• /
• 2019

이 연구에서는 미세먼지 시공간 변화 표현의 단점을 개선하고자 미세먼지를 흐름으로 시각화하였다. 일반적으로 미세먼지 흐름 시각화는 농도 분포와 바람장을 중첩해 표현하지만 도시 단위 이하 국지적 이동의 경우 바람과 미세먼지 이동이 다를 수 있으므로 바람장을 사용하는 것이 적합하지 않을 수 있다. 제시하는 시각화 방법론은 미세먼지 자료에서 직접 흐름 정보를 추출한다는 점에서 기존 연구와 차별성을 갖는다. 공간 상호작용을 설명하는 중력모델을 확장한 흐름 추출 방법을 미세먼지 자료에 적용하여 미세먼지 분포 변화에서 흐름 정보를 추출하였다. 이를 위해 공간보간법을 이용하여 미세먼지 분포도를 작성하였으며 추출된 미세먼지 흐름 정보를 물방울 모양의 움직이는 입자를 이용해 동적으로 시각화하였다. 산업 및 교통 활동이 시작하는 오전 5~7시 시간대를 대상으로 서울시 미세먼지 평균 흐름을 시각화하였으며 미세먼지 요인 중 하나인 교통정보와 연계하여 시각적으로 관련성을 분석하였다.