• 한국인터넷방송통신학회논문지
• /
• 제15권4호
• /
• pp.217-222
• /
• 2015

종방향 모드 전송선로 이론을 이용하여 실리콘 도파로에 기초한 플라즈마 격자 구조형 방향성 결합기(P-GADC)의 1D & 2D 격자 패턴에 따른 전송 모드 특성을 정확하게 분석하였다. 정확한 해석적 수식과 기, 우 모드 사이의 간섭특성에 의존하는 중첩모드를 정의하여 각 격자 패턴에서 발생하는 TE 모드의 필드분포를 수치해석 하였다. 수치해석 결과, 최대 결합효율을 발생시키는 필드분포는 정사각형 격자 패턴으로 구성된 P-GADC에서 발생하였다. 즉, GADC의 전형적인 최대 결합효율 조건인 위상정합 조건과 다른 최소간격 조건인 격자주기 $d_{min}=8.8{\mu}m$에서 발생하였다.

• 전자공학회논문지D
• /
• 제34D권12호
• /
• pp.83-88
• /
• 1997

We present a fiber laser sensor that uses a fiber grating as a strain sensor head and an end-reflector of the laser cavity. A passive wavelength. The long-period grating band-rejection filter showed a wide usable filter wavelength range of about 25 nm, and the intensity of transmitted light increased by 16% for 1nm sensor wavelength shift in trhe measurement range.

• 대한전자공학회논문지SD
• /
• 제38권9호
• /
• pp.624-633
• /
• 2001

회절격자 반주기 길이의 랜덤 변이가 QWS-DFB 레이저의 특성을 나타내는 척도인 xL 값에 미치는 영향을 알아보았다. QWS-DFB 레이저의 양 거울면은 무반사면으로 하였고, 회절격자 랜덤 변이는 평균이 0이고 분산이 1인 상관되어 있는 두 Gaussian 랜덤 변수로 나타내었다. 회절격자 반주기의 랜덤 변이가 있으면 동일 위상성분의 되먹임이 적어져 유효 xL 값이 감소하고 모드 간격이 줄어든다. 그런데, 회절격자 주기의 랜덤 변이가 있을 때 곁모드 간격에서 구한 결합계수 xL/sub SM/값과 주모드 거울면 손실에서 구한 xL/sub SM/는 일치하지 않으며, 랜덤 변이가 없을 때의 xL값보다 작다. 이 결과는 곁모드 간격 또는 spontaneous emission spectrum을 사용하여 측정한 xL/sub SM/ 값을 실제로 되먹임되는 정도를 나타내는 xL/sub eff/로 해석하여서는 안된다는 사실을 보여준다.

• 한국광학회지
• /
• 제19권4호
• /
• pp.315-319
• /
• 2008

열광학 장주기 격자를 이용한 노치 필터의 파워 소모를 이론적으로 살펴 보았다. 여기서 열광학 장주기 격자는 주기적인 히터들과 패드들로 구성된 히터 배열에 의해 유발된다. 히터 배열에서 소모되는 파워는 열광학 장주기 격자를 유발하는 줄(joule) 열로 전환되기 때문에, 그 파워를 조절함으로써 노치 필터의 특성을 동적으로 제어할 수 있다. 적절한 결합 효율을 얻기 위해 히터 배열에 가하는 파워는 히터 배열의 인자들에 의존하는데, 이 인자들은 히터의 폭과 길이, 패드의 폭, 그리고 히터 배열을 구성하는 금속 박막의 두께이다. 이 인자들이 파워 소모에 미치는 영향을 이론적으로 해석하는 근사적인 방법을 설명하고, 설명한 방법을 사용하여 인자들의 변화에 따른 파워 소모의 변화를 해석한다. 해석 결과로부터 파워 소모를 줄이기 위해 필요한 인자 선택의 기준을 도출한다.

• Current Optics and Photonics
• /
• 제5권3호
• /
• pp.243-249
• /
• 2021

In this paper, the sensing characteristics of a double cladding fiber (DCF) long-period fiber grating (LPFG) to the surrounding refractive index (SRI) are studied. The outer cladding of the DCF plays the role of the overlay, thus, the mode transition (MT) phenomenon of DCF can be induced by etching the outer cladding radius instead of coating overlays. The response characteristics of the effective refractive index (ERI) of the cladding mode to the outer cladding radius are analyzed. It is found that in the MT range, the change rate of ERIs of cladding modes is relatively larger than that for other ranges. Further, based on the features of the mode transition region (MTR), the phase-matching curve of the 11^th cladding mode is investigated, and the response of the DCF-LPFG to the SRI is characterized by the change of wavelength intervals between the dual peaks under different outer cladding radii. The numerical simulation results show that the SRI sensitivity is greatly improved, which is available to 3484.0 nm/RIU with the fitting degree 0.998 in the SRI range of 1.33-1.37. The proposed DCF-LPFG can provide new theoretical support for designing the DCF-LPFG refractive index sensor with excellent performances of sensitivity, linearity and structure.

• Current Optics and Photonics
• /
• 제6권1호
• /
• pp.44-50
• /
• 2022

An off-axis zone plate is able to focus on a single order while neglecting the zeroth order in a visible imaging system. This allows one to enhance the contrast quality in diffractive images, which is the major advantage of this type of zone plate. However, most previous reflection zone plates are used in focusing X-rays with a small grazing incident angle and are intricately designed with the use of a local grating period. In this study, we suggest the design of an off-axis elliptical zone plate (EZP) that is used to focus a monochromatic light beam with separation between the first and unfocused orders under a large grazing incident angle of 45°. An assumption using the total grating period, which depends on the average and constant grating period, is proposed to calculate the desired distance between the first and zeroth order and to simplify the construction of a novel model off-center EZP. Four diffractive optical elements (DOEs) with different parameters were subsequently fabricated by direct laser lithography and then verified using a performance evaluation system to compare the results from the assumption with the experimental results.

• 한국광학회:학술대회논문집
• /
• 한국광학회 1990년도 제5회 파동 및 레이저 학술발표회 5th Conference on Waves and lasers 논문집 - 한국광학회
• /
• pp.73-78
• /
• 1990

1.3${\mu}{\textrm}{m}$ DFB with absorption grating of 1.55${\mu}{\textrm}{m}$ InGaAsP layer was fabricated. This new type of DFB laser shows self-plusation for DC operation. At low level of injection the relation between the pulsation frequency and the injection current shows similar behavior with the relaxation oscillation of ordinary laser and at high level of injection the pulsation frequency decreases compared to the relaxation oscillation. Period doubling, period 3 and 4 were observed for AC modulation. In case of period doubling the waveform shows only one pulse within a period without any accompanying subsidiary pulses and the oscillation frequency was quite stable. The pulse widths as short as 58.5 ps was achieved with AC modulation. We propose the time division multiplexing application of this kind of DFB laser.

• Current Optics and Photonics
• /
• 제1권5호
• /
• pp.514-524
• /
• 2017

We proposed an integrated wavelength-selective photodetector based on a grating-assisted contradirectional coupler and a graphene absorption layer for a coarse wavelength division multiplexing (CWDM) communication system. The center wavelength of the absorption spectrum of the proposed device can be tuned simply by changing the period of the grating, and the proposed device structure is suitable to forming a cascaded structure. Therefore, an array of the proposed device of different grating periods can be used for simultaneous wavelength demultiplexing and signal detection in a CWDM communication system. Our theoretical study showed that the designed device with a grating length of $500{\mu}m$ could have an absorption of 95.1%, an insertion loss of 0.2 dB, and a 3 dB bandwidth of 7.5 nm, resulting in a -14 dB crosstalk to adjacent CWDM channels. We believe that the proposed device array can provide a compact and economic solution to receiver implementation in the CWDM system by combining functions of wavelength demultiplexing and signal detection.

• 한국광학회지
• /
• 제12권6호
• /
• pp.446-451
• /
• 2001

레이저 유도 격자 분광장치를 제작하여, $C_3$ $H_{8}$ 층류 확산화염에서 생성된 열 격자 신호를 측정하였다. 열 격자를 생성시키기 위한 여기광은 파장이 532nm인 Nd:YAG 레이저를 사용하였고, 검침광은 488nm의 CW A $r^{+}$레이저를 이용하였다. 검침 광의 세기를 변화시켜 장치의 회절효율과 신호 특성을 측정하였다. 측정된 열 격자 신호의 세기를 분석하여 화염내의 매연의 농도 분포를 정성적으로 측정하였고, 신호의 주파수 변화를 측정하여 온도 분포를 구하였다.

• 국제학술발표논문집
• /
• The 3th International Conference on Construction Engineering and Project Management
• /
• pp.1189-1194
• /
• 2009

A gutter-shaped U grating is a facility that is installed at the sides of a road to provide pedestrians with a rainwater-free road. The previous studies on this facility focused mainly on the progress of the efforts that are being made to improve its performance and interception efficiency so as to prevent damages in regional areas due to the heavy rains caused by climate change. The studies on its maintenance, however, are still inadequate. Therefore, this study was conducted to analyze and compare the life cycle costs and performance evaluations of the steel and magic gratings, which are installed in apartments. The results of the study show that the replacement period and rate of gratings differ depending on where they are installed. The initial capital investment cost of a magic grating installed at a road where many vehicles pass is quite high, but in terms of its maintenance and entire-life-cycle costs, its total expenses are lower than those of a steel grating. The results of this study are expected to serve as preliminary data for the selection of an adequate grating that is suitable for particular places in the design phase of construction projects.