• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.12
• /
• pp.1353-1361
• /
• 1992

Holographic optical element(HOE) is fabricated with the properties of lightweight, thin thickness and interconnectivity for free space. Particularly, HOE for optical interconnection and multiple image processing should have a high efficiency and equal spot intensity, Nonlinear equations for 2-dimensional binary phase grating(BPG) structure is solved by computer simulation based on modified Newton method. Computer-generated pattern drawn by plotter is scaled down and translated into the microfilm. After contact printing between the microfilm and silver halide hologram film, phase diffraction grating produces the $5{\times}5$ multiple spots. Experimental results are shown that bleached phase grating has a high efficiency and equal focused beams except central zero order.

• Korean Journal of Optics and Photonics
• /
• v.19 no.5
• /
• pp.360-364
• /
• 2008

The diffraction efficiencies of gratings are affected by the inner structure which is determined by modulation type. CGH (Computer generated Hologram) basically uses the principles of a diffraction grating. As like as the diffraction gratings the patterns recorded in the CGH are different according to modulation methods which result in the performances of the reconstructed images. In this paper, on this fact CGHs are recorded according to sinusoidal and rectangular modulation methods and the characteristics of reconstructed images are analyzed. Also the reconstruction performances of the amplitude and phase, phase-only and binary phase CGH are analyzed.

• Proceedings of the Optical Society of Korea Conference
• /
• 2001.02a
• /
• pp.194-195
• /
• 2001

We fabricated fiber bragg gratings using interferometric method with Phase mask. The interferometer consisted of two plane-parallel mirrors and a phase mask perpendicular to mirrors. The Gratings were written using an Argon-ion laser. The experimental setup could change Bragg wavelength given by the phase mask. (omitted)

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.2
• /
• pp.156-156
• /
• 2011

VPH (Volume Phase Hologram) grating is one of the transmission gratings and is known as its remarkable efficiency (>90%). It has two different densities of gelatins causing interference patterns. The VPH grating is favored in many astronomical instruments these days and also IGRINS, which is up coming near infrared high-resolution spectroscope expected to see the first light next year, uses the VPH grating as its cross-disperser. The infrared astronomical instruments operate at cryogenic temperature (~100K) in order to cut down thermal noise and the optical components of IGIRNS will be operated at 130K. The VPH grating is sandwiched in between fused silica or glass and glued together using optical adhesive. IGRINS is expected to go through 50 times of thermal cycling in 10 years including the performance test and this research is to check whether the physical characteristic such as the adhesion or dichromatic gelatin does not break and change from the several cryogenic thermal cycling. The two identical test gratings provided from Kaiser Optical System, Inc. are used in this test. One VPH grating is cooled down to 100K for 2 hours with maximum dT/dt = 5 and warmed up to the room temperature and another grating is kept stored in the room temperature and used as a control sample. In order to check the change, we inspected the grating with eyes and checked its efficiency and transmission at the room temperature every 10 cycling. From the 40 times of cryogenic temperature cool down cycling, the VPH grating showed no signs of change within the error compared to the control sample. We concluded the VPH grating is durable through several cryogenic thermal cycling.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.5
• /
• pp.483-488
• /
• 2022

In this paper, when a gain grating and a refractive index grating exist simultaneously in a DFB laser diode having a wavelength of 1.55 ㎛, an anti-reflection coating is applied to the right mirror surface so that ρ_r=0. In case of δL<0, the characteristics of the oscillation frequency and oscillation gain have been analyzed. Whenever the phase of the grating on the left side of the mirror continuously decreases by π/2, the δL value of each oscillation mode decreases by about 0.6 to the left of the graph lines of each oscillation mode. The case of the oscillation mode having the lowest threshold gain is the case of κL=10, and in this case, the mode selectivity is relatively low compared to the case of other values of κL. From κL=0.1 to κL=6, the mode selectivity and the frequency stability are excellent. As the mode selectivity is excellent, the frequency stability is excellent. Compared to the case with two cleaved mirrors, the DFB laser diode with anti-reflection coating increases the threshold gain of the oscillation mode by about 2 times, but the mode selectivity becomes about 2 times better.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.1189-1194
• /
• 2009

A gutter-shaped U grating is a facility that is installed at the sides of a road to provide pedestrians with a rainwater-free road. The previous studies on this facility focused mainly on the progress of the efforts that are being made to improve its performance and interception efficiency so as to prevent damages in regional areas due to the heavy rains caused by climate change. The studies on its maintenance, however, are still inadequate. Therefore, this study was conducted to analyze and compare the life cycle costs and performance evaluations of the steel and magic gratings, which are installed in apartments. The results of the study show that the replacement period and rate of gratings differ depending on where they are installed. The initial capital investment cost of a magic grating installed at a road where many vehicles pass is quite high, but in terms of its maintenance and entire-life-cycle costs, its total expenses are lower than those of a steel grating. The results of this study are expected to serve as preliminary data for the selection of an adequate grating that is suitable for particular places in the design phase of construction projects.

• ETRI Journal
• /
• v.28 no.5
• /
• pp.545-554
• /
• 2006

A widely tunable multi-channel grating cavity laser is proposed and experimentally demonstrated. The device is implemented in Littman configuration with an echelle grating based on Rowland circle construction and realized by monolithically integrating all elements in an InP substrate. Lasing wavelength is selected by turning on an amplifier and the appropriate channel element in the array, and it is tuned by controlling light deflection electrically. The 6-channel device exhibits a tuning range of about 50 nm with a side mode suppression ratio of more than 30 dB. This is accomplished by adjusting the applied current of the dispersive element and phase control section.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.4
• /
• pp.1-5
• /
• 2011

A new code structure for spectral-amplitude-coding optical CDMA based upon reconstructed modified double weight codes is proposed. The newly proposed code possesses ideal cross-correlation properties. By using fiber Bragg grating(FBG) in front of optical decoder, we can get the improved performance of the proposed system with the consideration of phase-induced intensity noise(PIIN).

• Journal of the Optical Society of Korea
• /
• v.3 no.2
• /
• pp.41-46
• /
• 1999

Spatial and temporal dynamics arising in a photorefractive crystal(BaTiO3) during the process of double phase conjugation was studied experimentally. We studied the dynamical effects caused by the buildup of the diffraction grating and turn on of phase conjugated beams, as well as the spatial effects caused by the finite transverse coupling of beams and the propagation direction of beams. We observed conical emission in DPCM. We believe that various temporal and spatial instabilities are due to movement of the nonlinear grating. For a real beam coupling and constructive interaction of interference fringes in the crystal, we observed steady, periodic, irregular temporal behavior. And, by the calculation of the correlation index, we found that the spatial correlation decreased as the transverse interaction region was increased.

• Journal of radiological science and technology
• /
• v.38 no.1
• /
• pp.39-49
• /
• 2015

One of properties which X-ray and Neutron can be applied nondestructive test is penetration into the object with interaction leads to decrease in intensity. X-ray interaction with the matter caused by electrons, Neutron caused by atoms. They share applications in nondestructive test area because of their similarities of interaction mechanism. Grating interferometer is the one of applications produces phase contrast image and dark field image. It is defined by Talbot interferometer and Talbot-Lau interferometer according to Talbot effect and Talbot-Lau effect respectively. Talbot interferometer works with coherence beam like X-ray, and Talbot-Lau has an effect with incoherence beam like Neutron. It is important to expect the interference in grating interferometer compared normal nondestructive system. In this paper, simulation works are conducted according to Talbot and Talbot-Lau interferometer in case of X-ray and Neutron. Variation of interference intensity with X-ray and Neutron based on wave theory is constructed and calculate elements consist the system. Additionally, Talbot and Talbot-Lau interferometer is simulated in different kinds of conditions.