• Carbon letters
• /
• 제14권2호
• /
• pp.110-116
• /
• 2013

This study investigated a developed process for producing a composite bipolar plate having excellent conductivity by using coal tar pitch and phenol resin as binders. We used a pressing method to prepare a compact of graphite powder mixed with binders. Resistivity of the impregnated compact was observed as heat treatment temperature was increased. It was observed that pore sizes of the GCTP samples increased as the heat treatment temperature increased. There was not a great difference between the flexural strengths of GCTP-IM and CPR-IM as the heat treatment temperature was increased. The resistivity of GPR700-IM, heat treated at $700^{\circ}C$ using phenolic resin as a binder, was $4829{\mu}{\Omega}{\cdot}cm$ which was best value in this study. In addition, it is expected that with the appropriate selection of carbon powder and further optimization of process we can produce a composite bipolar plate which has excellent properties.

• 대한기계학회논문집
• /
• 제6권3호
• /
• pp.261-270
• /
• 1982

In the previously reported Part I and Part II, the experimental results in the frictional machining under liquid atmospheres to obtain the best surface roughness were showed. In the present study the frictional machining was carried out in gas atmospheres such as air, oxygen, dioxide carbon and argon, and in solid lubricant atmosphere of graphite powder. The results were compared with those of Part I and Part II. The material to be tested and machining conditions were made identical with Part I and Part II. The best surface roughness obtained in the above gas and solid lubricant atmospheres was worse than the liquid atmospheres but the contact pressure to minimize the surface roughness was considerably low. The best surface roughness in the present study was obtained in the atmospheres of dioxide carbon and graphite powder and the worst one was in oxygen and argon gas.

• 한국분말재료학회지
• /
• 제24권4호
• /
• pp.298-301
• /
• 2017

In the present work, we use multiwall carbon nanotubes (MWCNT) as the starting material for the fabrication of sintered carbon steel. A comparison is made with conventionally sintered carbon steel, where graphite is used as the starting material. Milling is performed using a horizontal mill sintered in a vacuum furnace. We analyze the grain size, number of pores, X-ray diffraction patterns, and microstructure. Changes in the physical properties are determined by using the Archimedes method and Vickers hardness measurements. The result shows that the use of MWCNTs instead of graphite significantly reduces the size and volume of the pores as well as the grain size after sintering. The addition of $Y_2O_3$.to the Fe-MWCNT samples further inhibits the growth of grains.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.861-862
• /
• 2006

The suitable tools for CGI material has not been developed yet because of high hardness, high toughness and very low machininability compared to the grey cast iron. And the tool life has been decreased as the contents of Ti in CGI material. From this research, we were able to do the high speed machining by using high toughness silicon nitride ceramic tools. The silicon nitride ceramic tool grade was specially designed and prepared with microstructure of elongated grains with higher aspect ratio (c/a) than conventional one.

• 한국수소및신에너지학회논문집
• /
• 제22권5호
• /
• pp.592-598
• /
• 2011

Electrode of solid oxide fuel cell must have sufficient porosity to allow gas transport to the interface with electrolyte effectively but high porosity has a negative impact on structural stability in electrode support. Thus, the upper limit of porosity is based on consideration of mechanical strength of electrode. In this study, the effect of microstructure of Ni-YSZ anode supported SOFC on the mechanical and electrical property was investigated. LSCF composite cathode and 8YSZ electrolyte were used. The porosity of the anode was modified by the amount of graphite powder and added graphite contents were 24, 18, 12 vol%, respectively. The higher the porosity, the better the electrical performance, $P_{max}$. While the flexural strength decreased with increasing the amount of graphite. But the rate of increase in electrical performance and the rate of decrease in mechanical strength were not directly proportional to amount of graphite. The optimum graphite content incorporating both electrical and mechanical performance was 18 vol%.

• 한국수소및신에너지학회논문집
• /
• 제31권6호
• /
• pp.564-570
• /
• 2020

Metal hydride is suitable for safe storage of hydrogen. The hydrogen storage kinetics of the metal hydride are highly dependent on its heat transfer characteristics. This study presents a metal hydride-expended graphite composite with improved thermal conductivity and its hydrogen storage kinetics. To improve the heat transfer characteristics, a metal hydride was mixed and compacted with a high thermal conductivity additive. As the hydrogen storage material, AB5 type metal hydride La0.9Ce0.1Ni5 was used. As an additive, flakes-type expended graphite was used. With improved heat transfer characteristics, the metal hydride-expended graphite composite stores hydrogen four times faster than metal hydride powder.

• 대한금속재료학회지
• /
• 제49권7호
• /
• pp.530-534
• /
• 2011

To analyze the effect of the pore size of graphite in a pore-forming agent, graphite was added to porous ceramics of $Al_2O_3-SiO_2-ZrO_2$ systems. The graphite had 45~75, 100~125, 150~180, and 75~180${\mu}m$ dimensions. The properties of the ceramics, such as apparent porosity, density, dynamic elastic modulus, mechanical strength, and permeability, were investigated. The average pore size increased from 15.35${\mu}m$ to 22.32${\mu}m$ with the increase of the graphite size. The sample with the largest average pore size showed the highest mechanical strength and gas permeability. This was due to the sample with the largest pore size at the same porosity having fewer pores and larger distance between the pores than the sample with the smallest pore size, making cracks less likely to propagate. In addition, the large pore size reduced the repulsive power originating from the drag force between the gas and internal pore walls.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1994년도 춘계 학술발표 강연 및 논문 개요집
• /
• pp.73-73
• /
• 1994

• 한국결정성장학회지
• /
• 제29권6호
• /
• pp.383-388
• /
• 2019

개선된 열탄소환원법으로 합성된 금속불순물함량 1 ppm 이하의 고순도 SiC 미립 분말을 이용하여 2,100℃ 이상고온의 RF 가열 PVT 장치에서 SiC 단결정을 성장시켰으며, In-situ x-ray 이미지 분석을 통해 성장과정 중 분말의 승화거동 및 단결정 성장거동을 관찰하였다. SiC 분말은 단결정 성장의 공급원으로 온도가 높은 외곽 부분부터 소진되고 graphite 잔여물이 남았다. 성장 중 원료의 흐름은 가운데 부분으로 집중되었으며 SiC 단결정의 성장거동에도 영향을 미쳤는데, 이는 미립분말로 인한 도가니 내부 온도분포 차이가 원인으로 예상되었다. 단결정 성장이 완료된 후, 단결정 잉곳을 1 mm 두께의 단결정 기판으로 절단하고 또한, 잉곳에서 얻어진 단결정 기판은 전반적으로 짙은 황색의 4H -SiC가 관찰되었으며, 외곽에 일부 발생한 다결정은 시드결정을 시드홀더에 부착하는 과정에서 혼입된 기포층과 같은 불순물 혼입이 원인으로 사료된다.

• 한국산학기술학회논문지
• /
• 제12권10호
• /
• pp.4673-4678
• /
• 2011

이 연구에서는 고분자 전해질 막 연료전지의 분리판 용 고분자/흑연 복합소재의 혼합 특성 및 점도 측정 방법에 관하여 연구하였다. 분리판은 전도성이 있어야 하기 때문에 흑연의 함량이 매우 높고 이 때문에 제조된 복합재료의 점도가 높아 점도 측정이 어려운 문제가 있다. 일반적으로 캐필러리 레오메터에서 사용되는 다이로 점도를 측정한 결과 압력이 시간에 따라서 계속 변하고 정상상태의 값을 보이지 않아서 점도 측정이 불가능 했다. 다이의 디자인을 변경하여 측정하면 압력이 정상상태를 보이는 것을 관찰할 수 있었으나, 흑연과 PET를 단순 용융 혼합하여 점도를 측정하는 경우에는 측정된 점도 값이 재현성이 없는 결과를 나타냈다. 여러 차례의 시행 오차 끝에 흑연과 PET를 작은 입자로 분쇄한 후 용융 혼합하면 재현성 있는 점도를 측정할 수 있고, 제조된 복합재료의 전기전도도 값도 재현성 있는 결과를 보임을 관찰하였다.