• Applied Chemistry for Engineering
• /
• v.19 no.4
• /
• pp.407-412
• /
• 2008

As an activation procedure, in this study, the oxidation treatment of needle cokes with a dilute nitric acid and sodium chlorate $(NaClO_3)$, combined with heat treatment, was attempted. The structures of acid-treated and pyrolyzed coke were examined with XRD, FESEM, elemental analyzer, BET, and Raman spectroscopy. The behavior of double layer capacitance was investigated with the analysis of charge and discharge. The structure of needle coke treated with acid was revealed to a single phase of (001) diffraction peak after 24 h. On the other hand, thecoke oxidized by heat treatment was reduced to a graphite structure of (002) at $300^{\circ}C$. The distorted graphene layer structure, derived from the process of oxidation and reduction of the inter-layer, makes the pores by the electric field activation at the first charge, and generates the double layer capacitance from the second charge. The cell using pyrolyzed coke with 24 h acid treatment and $300^{\circ}C$ heat treatment exhibited the maximum capacitance per weight and volume of 33 F/g and 30 F/mL at the two-electrode system in the potential range of 0~2.5 V.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.30 no.2
• /
• pp.119-125
• /
• 2017

Ablative material in a rocket nozzle is exposed to high temperature combustion gas, thus undergoes complicated thermal/chemical change in terms of chemical destruction of surface and thermal decomposition of inner material. Therefore, method for conjugate analysis of thermal response inside carbon/phenolic material including rocket nozzle flow, surface chemical reaction and thermal decomposition is developed in this research. CFD is used to simulate flow field inside nozzle and conduction in the ablative material. A change in material density and a heat absorption caused by the thermal decomposition is considered in solid energy equation. And algebraic equation under boundary layer assumption is used to deduce reaction rate on the surface and resulting destruction of the surface. In order to test the developed method, small rocket nozzle is solved numerically. Although the ablation of nozzle throat is deduced to be higher than the experiment, shape change and temperature distribution inside material is well predicted. Error in temperature with experimental results in rapid heating region is found to be within 100 K.

• Journal of Life Science
• /
• v.23 no.10
• /
• pp.1209-1215
• /
• 2013

Graphene is an allotrope of carbon that is composed of one-atom-thick planar sheets. It is known to have a preventive effect on cancer in photothermal therapy and a protective effect in DNA oxidation. The effect of graphene on oxidative stress and matrix metalloproteinases (MMPs) was investigated in human fibrosarcoma HT1080 cells. The results showed that graphene specifically exerted an inhibitory effect on DNA oxidation, but it did not inhibit other oxidative stress. In addition, graphene decreased the expression and the activation of MMP-2 and MMP-9 stimulated by phenazine methosulfate-m, which induces the production of intracellular hydrogen peroxide. In particular, the expression of antioxidant enzymes, such as superoxide dismutase (SOD-2), was decreased in the HT1080 cells, indicating that the decrease in the expression level of SOD was due to the antioxidant effect of graphene. These results suggest that the inhibitory effect of oxidative stress in the presence of graphene could inhibit the expression of MMPs in HT1080 cells. Based on the above results, graphene may have chemoprevention properties through inhibition of MMP-2 and MMP-9 related to metastasis.

• Clean Technology
• /
• v.22 no.4
• /
• pp.258-268
• /
• 2016

In this work, carboxymethylcellulose-based composite superabsorbent hydrogels were prepared by electron beam radiation. The composition of carboxymethylcellulose (CMC) varied from 4 wt%, 5 wt%, and 6 wt% to 7 wt% based on the amount of distilled water in the syntheses of hydrogels. Graphite oxide, reduced graphene oxide, activated carbon, and bentonite were used as additives for the synthesis of composite superabsorbent. The effect of CMC composition and the type of additives on the gel properties of the prepared hydrogels was investigated. In order to verify the functional groups in the prepared materials, Fourier transform infrared spectroscopy was used. In addition, mechanical strength, gel fraction, swelling kinetics, and equilibrium swelling ratios were measured for the prepared hydrogels. Swelling experiments were carried out in distilled water, urea solution, and physiological saline water. Prepared hydrogels were reused for 5 times, and gel fraction and swelling ratio were measured at every 24 hours. Among the prepared hydrogels, $C_{5%}GO$ and $C_{5%}rGO$ exhibited excellent mechanical property and relatively high swelling ratios for urea solution and physiological saline water with promising applicability as slow-release fertilizers.

• Korean Journal of Crystallography
• /
• v.7 no.1
• /
• pp.36-43
• /
• 1996

The crystal structure Tris(ethylenediamine)nickel(II)Dichromate has been determined by X-ray crystallography. Crystal data: a=8.268(2), b=13.865(2), c=14.921(2)Å, γ=102.04(2)°, V=1672.9(5)Å3, Z=4, Monocline, P21/b (space group No.=14), Dcalc=1.806 gcm-3, μ=24.05 cm-0.1. The intensity data were collected with Mo-Kα radiation(λ=0.7107Å) on an automatic four-circle diffractometer with a graphite monochromator. The structure was solved by Patterson method and refined by full matrix least-square methods using unit weights. The final R and S values were R=0.045, Rw=0.051, Rall=0.059 and S=2.171for 2248 observed reflections. The two carbon atoms of a ring of Ni(en)-ion were split into crossed four atoms. In consideration of α- and β-angles of two rings of a disordered ethylenediamine of Nien3-ion and the hydrogen bonds between Ni(en)3-cation and Cr2O7-anion, the configuration of Ni(en)3-ion is assumed to be disordered with Λδδδ and Λδδλ.

• Applied Chemistry for Engineering
• /
• v.25 no.1
• /
• pp.1-13
• /
• 2014

Lithium ion batteries (LIBs) are the state-of-the-art technology among electrochemical energy storage and conversion cells, and are still considered the most attractive class of battery in the future due to their high specific energy density, high efficiency, and long cycle life. Rapid development of power-hungry commercial electronics and large-scale energy storage applications (e.g. off-peak electrical energy storage), however, requires novel anode materials that have higher energy densities to replace conventional graphite electrodes. Germanium (Ge) and silicon (Si) are thought to be ideal prospect candidates for next generation LIB anodes due to their extremely high theoretical energy capacities. For instance, Ge offers relatively lower volume change during cycling, better Li insertion/extraction kinetics, and higher electronic conductivity than Si. In this focused review, we briefly describe the basic concepts of LIBs and then look at the characteristics of ideal anode materials that can provide greatly improved electrochemical performance, including high capacity, better cycling behavior, and rate capability. We then discuss how, in the future, Ge anode materials (Ge and Ge oxides, Ge-carbon composites, and other Ge-based composites) could increase the capacity of today's Li batteries. In recent years, considerable efforts have been made to fulfill the requirements of excellent anode materials, especially using these materials at the nanoscale. This article shall serve as a handy reference, as well as starting point, for future research related to high capacity LIB anodes, especially based on semiconductor Ge and Si.