• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.1030-1033
• /
• 2005

Today's most equipments that contain embedded system only support simple menus and background graphics. However, as the embedded system is applied for much more various fields and the user's needs for graphical interface become higher, the support for multimedia and moving pictures became an important criterion to evaluate the performance of a equipment. Because the present embedded system uses software to construct display environment, it is difficult to meet the bandwidth for multimedia contents and moving pictures. Using software for graphic also lowers the performance of the main function by overloading the processor. In this paper, we present an OLED/TFT-LCD controller suitable for embedded systems. The architecture we propose is described in HDL and the performance is evaluated in comparison with the existing embedded systems.

• Journal of Korea Water Resources Association
• /
• v.30 no.5
• /
• pp.431-439
• /
• 1997

This paper describes the development of a decision support system (DSS) for the real time reservoir operation that aims to maximize the flood control effect. In the decision support system, model base and real time data processing subsystem are included along with the graphical user interface(GUI) that is able to visualize the forecasted runoff hydrographs at the flood control points and reservoir water levels resulting from the model run as well as the current hydrologic status. The system was verified through the pseudo real time applications to the Taechong reservoir operation with the historical flood events of the Kum river basin occurred in July, 1987 and August, 1995, Decision making processes were performed using the developed system and the results were compared with the real operations at that time. The reservoir operation using the pseudo real time application of DSS were simulated by the flood runoff simulation model, that shows the reservoir operation by DSS were successful in flood control for the lower Kum River.

• Journal of KIISE:Computer Systems and Theory
• /
• v.31 no.5_6
• /
• pp.360-370
• /
• 2004

Adaptive mesh refinement(AMR) is one of the popular computational simulation techniques used in various scientific and engineering fields. Although AMR data is organized in a hierarchical multi-resolution data structure, traditional volume visualization algorithms such as ray-casting and splatting cannot handle the form without converting it to a sophisticated data structure. In this paper, we present a hierarchical multi-resolution splatting technique using k-d trees and octrees for AMR data that is suitable for implementation on the latest consumer PC graphics hardware. We describe a graphical user interface to set transfer function and viewing / rendering parameters interactively. Experimental results obtained on a general purpose PC equipped with an nVIDIA GeForce3 card are presented to demonstrate that the proposed techniques can interactively render AMR data(over 20 frames per second). Our scheme can easily be applied to parallel rendering of time-varying AMR data.

• Journal of KIISE
• /
• v.42 no.8
• /
• pp.1022-1030
• /
• 2015

The context-awareness of mobile applications yields several issues for testing, since mobile applications should be able to be tested in any environment and under any contextual input. In previous studies of testing for Android applications as an event-driven system, many researchers have focused on using generated test cases considering only Graphical User Interface (GUI) events. However, it is difficult to find failures that could be detected when considering the changes in the context in which applications run. It is even more important to consider various contexts since the mobile applications adapt and use the new features and sensors of mobile devices. In this paper, we provide a method of systematically generating various executing contexts from permissions. By referring to the lists of permissions, the resources used by the applications for running Android applications can be easily inferred. To evaluate the efficiency of our testing method, we applied the method on two open source projects and showed that it contributes to improve the statement code coverage.

• Annals of Laboratory Medicine
• /
• v.38 no.6
• /
• pp.512-517
• /
• 2018

Background: Complete blood count (CBC) results play an important role in peripheral blood smear (PBS) examinations. Many descriptions in PBS reports may simply be translated from CBC parameters. We developed a computer program that automatically generates a PBS draft report based on CBC parameters and age- and sex-matched reference ranges. Methods: The Java programming language was used to develop a computer program that supports a graphical user interface. Four hematology analyzers from three different laboratories were tested: Sysmex XE-5000 (Sysmex, Kobe, Japan), Sysmex XN-9000 (Sysmex), DxH800 (Beckman Coulter, Brea, CA, USA), and ADVIA 2120i (Siemens Healthcare Diagnostics, Eschborn, Germany). Input data files containing 862 CBC results were generated from hematology analyzers, middlewares, or laboratory information systems. The draft reports were compared with the content of input data files. Results: We developed a computer program that reads CBC results from a data file and automatically writes a draft PBS report. Age- and sex-matched reference ranges can be automatically applied. After examining PBS, users can modify the draft report based on microscopic findings. Recommendations such as suggestions for further evaluations are also provided based on morphological findings, and they can be modified by users. The program was compatible with all four hematology analyzers tested. Conclusions: Our program is expected to reduce the time required to manually incorporate CBC results into PBS reports. Systematic inclusion of CBC results could help improve the reliability and sensitivity of PBS examinations.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.15 no.3
• /
• pp.86-93
• /
• 2011

Recently, development and application of condition monitoring and diagnostic system for improvement of durability and reliability and reduction of operating cost is generalized in the aircraft propulsion system. Expecially, for reliable operation of the high altitude and a long time and condition monitoring system to identify faults and degradations of its propulsion system should be needed. This work proposed a GUI-based On-line condition monitoring program using LabVIEW by PT6A-67 turboprop engine. The proposed on-line condition program can monitor the real engine performance as well as the trend through precise comparison between performance results calculated by the base performance simulation program and measuring engine performance signals. In the development phase of this monitoring system, a signal generation module is proposed to evaluate the proposed on-line monitoring system.

• International Journal of High-Rise Buildings
• /
• v.8 no.2
• /
• pp.101-106
• /
• 2019

Assessing the energy performance of supertall buildings often does not consider variations in energy consumption due to the change of environmental conditions such as temperature, pressure, and wind speed associated with differing elevations. Some modelers account for these changing conditions by using a conventional temperature lapse rate, but not many studies confirm to the appropriateness of applying it to tall buildings. This paper presents and discusses simulated annual energy consumption results from a 600 m tall skyscraper floor plate located in Dubai, UAE, assessed using ground level weather data, a conventional temperature lapse rate of $6.5^{\circ}C/km$, and more accurate simulated 600 m weather data. A typical office floorplate, with ASHRAE 90.1-2010 standards and systems applied, was evaluated using the EnergyPlus engine through the OpenStudio graphical user interface. The results presented in this paper indicate that by using ground level weather data, energy consumption at the top of the building can be overestimated by upwards of 4%. Furthermore, by only using a lapse rate, heating energy is overestimated by up to 96% due to local weather phenomenon such as temperature inversion, which can only be conveyed using simulated weather data. In addition, sizing and energy consumption of fans, which are dependent both on wind and atmospheric pressure, are not accurately captured using a temperature lapse rate. These results show that that it is important, with the ever increasing construction of supertall buildings, to be able to account for variations in climatic conditions along the height of the building. Adequately modeling these conditions using simulated weather data will help designers and engineers correctly size mechanical systems, potentially decreasing overall building energy consumption, and ensuring that these systems are able to provide the necessary indoor conditions to maintain occupant comfort levels.

• PNF and Movement
• /
• v.18 no.3
• /
• pp.365-373
• /
• 2020

Purpose: The COVID-19 pandemic has changed how healthcare is delivered worldwide and has affected the environment of the healthcare. Physical therapy in traditional healthcare systems can be difficult in unusual circumstances, such as the COVID-19 pandemic. Tele-physical therapy, defined as "the delivery of the physical therapy at a distance using electronic information and telecommunication technologies," will be a solution for this healthcare crisis. Thus, in this study, we proposed a mobile application for tele-physical therapy. Methods: This study used the Chrome Browser version 83.0.4 based on the Windows 10 64Bit operating system to use the App Inventor. To operate the mobile application, we used the Samsung Galaxy Note 9. The design of the mobile application was based on the review of a system used in the physical therapy department. Results: The graphical user interface (GUI) of the mobile application was displayed on three screens: selecting a painful joint (1st screen of the GUI); selecting a painful movement of the joint (2nd screen of the GUI); a self-manual therapy method and movie (3rd screen of the GUI). The proposed mobile application showed the stable repeatability of the self-manual therapy movie. Conclusion: The results of this study demonstrated that the proposed mobile application using the App Inventor for android will be able to create easy to use and reliable tele-physical therapy.

• Safety and Health at Work
• /
• v.13 no.1
• /
• pp.40-50
• /
• 2022

Background: Underground mines have several hazards that could lead to serious consequences if they come into effect. Acquiring, evaluating, and using the real-time data from the atmospheric monitoring system and miner's positional information is crucial in deciding the best course of action. Methods: A graphical user interface-based software is developed that uses an AutoCAD-based mine map, real-time atmospheric monitoring system, and miners' positional information to guide on the shortest route to mine exit and other locations within the mine, including the refuge chamber. Several algorithms are implemented to enhance the visualization of the program and guide the miners through the shortest routes. The information relayed by the sensors and communicated by other personnel are collected, evaluated, and used by the program in proposing the best course of action. Results: The program was evaluated using two case studies involving rescue relating to elevated carbon monoxide levels and increased temperature simulating fire scenarios. The program proposed the shortest path from the miner's current location to the exit of the mine, nearest refuge chamber, and the phone location. The real-time sensor information relayed by all the sensors was collected in a comma-separated value file. Conclusion: This program presents an important tool that aggregates information relayed by sensors to propose the best rescue strategy. The visualization capability of the program allows the operator to observe all the information on a screen and monitor the rescue in real time. This program permits the incorporation of additional sensors and algorithms to further customize the tool.

• PNF and Movement
• /
• v.21 no.1
• /
• pp.129-137
• /
• 2023

Purpose: The physical therapy diagnosis process requires high-level background knowledge, the ability to obtain added information from patients, accurate examination skills, and a framework for transforming thoughts into a diagnostic decision. Thus, the physical therapy diagnostic process is highly complicated and difficult work. To function as autonomous professionals, physical therapists must develop effective clinical diagnosis skills. As such, mobile application aids can help with accurate and scientific diagnoses. Therefore, this study aims to develop and evaluate the usability of a mobile application for physical therapy diagnoses. Methods: In this study, a diagnostic application was developed using App Inventor, the development environment was the Chrome web browser for Windows 10, and the mobile application was run on a Google Pixel 5. The developed application was evaluated for usability by 20 physical therapists with more than 5 years of clinical experience in the musculoskeletal physical therapy field, and a usability evaluation was conducted using a 5-point Likert scale for accuracy, convenience, satisfaction, and usability. The collected Likert scores were converted into percentages and analyzed as descriptive statistics. Results: The graphical user interface consisted of an initial screen with program guidance, 18 screens presenting the algorithm, and 12 screens presenting the estimated diagnosis based on the algorithm. As such, the usability evaluation of the developed application was as follows: accuracy 100%, convenience 90%, satisfaction 91%, and usability 88%. Conclusion: The newly developed mobile application for physical therapeutic diagnoses has a high accuracy, and it will aid in building an easy and reliable physical therapy diagnosis system.