• 대한전자공학회논문지
• /
• 제24권3호
• /
• pp.466-471
• /
• 1987

We investgated I-V cahracteristics and relationship between microstructures and electrical properties in the specimens fabricated by seed grain method for low voltage Zn O varistor. Breaksown voltage was mainly dependent on seed grain size, and could be cntrolled to 10V/mm -15V/mm by sintering temperature and time. In non-seed grain method breakdown voltage generally agreed with final grain size, but did not always agree with it by the change of barrier phase distribution in case of the method using seed grains.

• 열처리공학회지
• /
• 제37권4호
• /
• pp.155-162
• /
• 2024

SCr420H steel which is commonly utilized for automotive components requires the carburizing heat treatment process. Abnormal grain growth during this treatment significantly affects the mechanical properties of the steel parts. Consequently, a process designed to prevent abnormal grain growth at certain elevated temperatures is essential. For enhanced grain refinement, we considered the addition of Nb in SCr420H steel. The experimental condition of the carburizing heat treatment involved reheating the steel sample to temperatures between 940℃ and 1080℃. Using scanning electron microscopy, we examined the microstructure of specimens treated with the secondary solution, revealing an organization of bainite and ferrite. Transmission electron microscopy was utilized to determine the type, shape, and size of the carbonitrides, showing a high fraction of AlN at the secondary solution treatment temperature of approximately 1050℃ and of (Nb,Ti)(C,N) around 1200℃. AlN particles measured about 100 nm and (Nb,Ti)(C,N) about 50 nm. Optical microscopy was utilized to assess grain size variations at different secondary solution treatment temperatures. It is noted that the temperature at which abnormal grain coarsening occurred rose with increasing secondary solution treatment temperatures, indicating a greater influence of (Nb,Ti)(C,N) with higher heat treatment temperatures. This research provides reference data for preventing abnormal grain growth in Nb-added low alloy steels undergoing carburizing heat treatment.

• 한국작물학회지
• /
• 제44권3호
• /
• pp.277-281
• /
• 1999

Dull grains segregated from F$_3$ and F$_4$ of the crosses between two dull mutants and a glutinous cultivar were compared with non-glutinous and glutinous segregants for their physicochemical properties. Amylose content of dull rice grain segregated from the dull/glutinous cross showed the intermediate value between glutinous and non-glutinous rice grain, whether it is controlled by the recessive or dominant gene. Alkali digestibility value (ADV) of dull rice grain was lower than that of glutinous or non-glutinous rice. A positive correlation was found between ADV and amylose content of homozygous non-glutinous or dull F$_4$ grains, but a negative relationship was observed in glutinous grains. Protein content of dull grain was significantly higher than that of glutinous or non-glutinous grain segregated from the same cross, while those of glutinous and non-glutinous grains were not different. Among gelatinization characteristics, initial pasting temperature and peak viscosity of dull grains were higher than glutinous rice, and were not different with non-glutinous grain. Hot, cool and consistency viscosities of dull grain were intermediate between glutinous and non-glutinous rices. Dull grains showed the highest breakdown viscosity and the lowest setback viscosity among the three endosperm types.

• Journal of Welding and Joining
• /
• 제24권4호
• /
• pp.39-49
• /
• 2006

The austenite grain growth model in low alloyed steel HAZ without precipitates was proposed by analyzing isothermal grain growth behavior. Steels used in this study were designed to investigate the effect of alloying elements. Meanwhile, a systematic procedure was proposed to prevent inappropriate neglect of initial grain size (D0) and misreading both time exponent and activation energy for isothermal grain growth. It was found that the time exponent was almost constant, irrespectively of temperature and alloying elements, and activation energy increased with the addition of alloying elements. From quantification of the effect of alloying elements on the activation energy, an isothermal grain growth model was presented. Finally, combining with the additivity rule, the austenite grain size in the CGHAZ was predicted.

• 한국작물학회지
• /
• 제67권4호
• /
• pp.234-241
• /
• 2022

본 연구에서는 온도상승에 따른 국내산 빵용 밀의 수량과 품질 변화 연구를 위해 TGT을 이용하여 생육기간 중 정상 온도 대비 1-3℃ 증가한 조건에서 수량구성요소와 수량 그리고 밀가루 품질 및 분자생리적 요인을 분석함으로써 밀 생육기 전반에 미치는 온도상승의 영향을 연구하였고, 연구 결과는 다음과 같다. 1. 밀 생육기간 중 평균온도가 1℃ 상승함에 따라 백강과 조경 두 품종 모두 출수기는 3일 정도 단축되었고, 일수립수가 감소하였으며, 온도가 상승함에 따라 수량이 감소하였다. 2. 밀가루 품질 분석 결과 아밀로스와 회분 함량은 백강과 조경 두 품종 모두 온도상승에 의한 영향을 받지 않았으나, T0 조건 대비 T3 조건에서 단백질 함량은 증가하였고 총 전분 함량은 감소하였으며, 3. 등숙기 중 글리아딘과 글루테닌 합성 및 대사 관련 유전자 발현 분석 결과 백강과 조경 두 품종 모두 종자 발달 후기에서 T0 대비 T3 조건에서 발현양이 높았으며, 전분 합성 관련 유전자 발현양은 빠르게 감소하였다. 4. TGT을 이용한 국내산 빵용 밀의 생육기 전반에 미치는 온도상승이 수량과 품질에 영향을 미쳤으며, 관련 유전자 발현 분석은 향후 기후변화 대응을 위한 기초 자료로 활용할 수 있을 것이다.

• 한국결정성장학회지
• /
• 제8권1호
• /
• pp.64-72
• /
• 1998

증착변수(온도, 압력, Ge조성) 변화에 따라 증착된 다결정 $Si_{1-x}Ge_x$박막의 결정성 및 결정립크기 그리고 표면거칠기 변화와 이러한 결과들이 비저항에 미치는 영향에 대해 살펴보았다. 증착온도와 Ge조성이 증가함에 따라 결정화도와 결정립크기가 증가하였으며 증가된 결정립에 의해 비저항값은 감소하였으나 표면거칠기가 증가하였다. 한편 증착압력 증가에 따라 결정화도는 증가했으나 결정립크기와 cluster 크기가 감소하였는데 이러한 결정립과 cluster 크기 감소에 의해 표면거칠기가 감소하였다. 또한 증착압력 증가에 따라 결정화도와 비저항은 증가하였으나 결정립크기와 cluster 크기가 작아져 표면거칠기가 감소하였다. 결정화도와 결정립크기가 비저항에 미치는 영향을 볼 때, 결정화도 보다는 결정립크기가 비저항에 더욱 영향을 줌을 알 수 있었다.

• 한국재료학회지
• /
• 제16권6호
• /
• pp.360-366
• /
• 2006

A series of ZnO thin films were grown by radio-frequency (RF) magnetron sputtering with various RF powers on $SiO_2/Si$(100) substrates at $500^{\circ}C$. Thicknesses of the investigated ZnO films were fixed to about 250nm by changing the growth time based on the changes of growth rates with RF powers. All the ZnO thin films were grown with <0001> preferred orientation. Average grain sizes of about 250nm-thick ZnO films evaluated by FE-SEM, AFM, and TEM were increased by decreasing the RF power. Structural properties addressed by FWHM values of XRD (0002) omega rocking curves and their intensities were better for the smaller grain sized ZnO films grown with high RF powers, which implies small values of tilt for smaller grain sized ZnO films. However, optical properties addressed by intensities of band edge emissions from room temperature and low temperature photoluminescence were better for the larger grain sized ZnO films with low RF power, which implies grain boundaries acted as nonradiation recombination centers.

• Nuclear Engineering and Technology
• /
• 제46권1호
• /
• pp.117-124
• /
• 2014

The effect of various process variables on the powder properties of recycled $U_3O_8$ from MnO-$Al_2O_3$ doped large grain $UO_2$ pellets and the effect of those recycled $U_3O_8$ powders on the sintered density and grain size of MnO-$Al_2O_3$ doped large grain $UO_2$ pellets have been investigated. The evolution of morphology, size, and BET surface area of the recycled $U_3O_8$ powders according to the respective variation of the thermo-mechanical treatment variables of oxidation temperature, powder milling, and sequential cyclic heat treatment of oxidation and then reduction was examined. The correlation between the BET surface area of recycled $U_3O_8$ powder and the sintered pellet properties of MnO-$Al_2O_3$ doped pellets showed that the pellet density and grain size of doped pellets were increased and then saturated by increasing the BET surface area of the recycled $U_3O_8$ powder. The density and grain size of the pellets were maximized when the BET surface area of the recycled $U_3O_8$ powder was in the vicinity of $3m^2/g$. Among the process variables applied in this study, the cyclic heat treatment followed by low temperature oxidation was a potential process combination to obtain the sinter-active $U_3O_8$ powder.

• 한국환경과학회지
• /
• 제24권3호
• /
• pp.281-290
• /
• 2015

Recent climate change has led to fluctuations in agricultural production, and as a result national food supply has become an important strategic factor in economic policy. As such, in this study, panel data was collected to analyze the effects of seven meteorological elements on the production of five types of grain with error component panel data regression method following the test results of LM tests, Hausman test. The key factors affecting the production of rice were average temperature, average relative humidity and average ground surface temperature. The fluctuations in the other four grains types are not well explained by meterological elements. For other grains and beans, only average temperature and time (year) affect the production of other grains while average temperature, ground surface temperature, and time (year) influence the production of beans. For barley and millet, only average temperature positively affects the production of barley while ground surface temperature and time (year) negatively influence the production of millet. The implications of this study are as follow. First, it was confirmed that the meteorological elements have profound effects on the rice production. Second, when compared to existing studies, this study was not limited to rice but encompassed all five types of grains and went beyond other studies that were limited to temperature and rainfall to include various meteorological elements.

• 한국농림기상학회지
• /
• 제16권4호
• /
• pp.384-388
• /
• 2014

과거 12년동안(2001~2012년)의 벼 등숙기간인 8~9월의 기상변화 특징은 기온이 높아지고 일조시간이 줄어드는 경향이었다. 이와 같은 벼 등숙기간의 고온과 일조시간의 부족은 벼 기준의 기후생산력지수(CPI)의 감소의 원인이었고, 감소의 정도는 벼 출수기가 빠를수록 더 크게 나타나는 것으로 분석되었다. 따라서, 안정적인 벼생산량을 확보하기 위해서는 벼 출수기를 늦추는 재배적인 조치가 필요할 것으로 판단되었다. 그리고, 과거 12년동안의 벼 수량의 변화는 특별한 경향을 나타내지는 않았으나, 벼 수량의 연간 변화는 CPI의 연간 변화와 유사한 패턴을 보였다. 특히, 출수기가 8월 11일 조건에서, 벼 수량에 대한 CPI의 일차함수는 전국 벼 수량 변이의 63%정도 설명하는 것으로 분석되었다.