• Title/Summary/Keyword: Grain Variety

Search Result 540, Processing Time 0.031 seconds

A Shinpung Typed Large Grain and High-Yielding Peanut Variety 'Daan' (단경 소분지 대립 다수성 땅콩 신품종 '다안')

  • Pae, Suk-Bok;Lee, Myoung-Hee;Kim, Sung-Up;Hwang, Chung-Dong;Oh, Ki-Won;Jung, Chan-Sik;Song, Deok-Young;Baek, In-Youl;Lee, Young-Hee
    • Korean Journal of Breeding Science
    • /
    • v.49 no.3
    • /
    • pp.224-229
    • /
    • 2017
  • A new peanut variety 'Daan'(Arachis hypogaea ssp. hypogaea L.) was developed at the Department of Southern Area Crop Science, National Institute of Crop Science (NICS) in Milyang 2014. This was developed from the cross between 'Iksan 31' with Virginia typed short stem and 'Dakwang' with Shinpung-typed larger grain. 'Daan' which is a Shinpung plant type had 13 branches per plant and its length of main stem was 44cm. Each pod has two grains with brown testa and long ellipse-shaped large kernel. Its yield components showed 34 pods per plant, 127 g of 100-seed-weight and 75% of pod shelling ratio in the regional yield trials (RYT). Seed quality showed 47.8% of crude oil and 28.3% of protein content. This variety showed resistant to early leaf spot and had more resistant to late leaf spot, stem rot and lodging, compared to reference variety. In the regional yield trials for 3 years 'Daan' was more productive than reference variety by 16% with 5.00 MT/ha for grain production.

The Effect of Grain Size on the Stress Shift toward Tensile Side by Deposition Interruptions in Copper Thin Films (구리 박막 제조중 증착 중단시 박막 결정립 크기 변화가 인장응력 방향으로의 응력 이동에 미치는 영향)

  • Lee, Seri;Oh, Seungkeun;Kim, Youngman
    • Journal of the Korean institute of surface engineering
    • /
    • v.47 no.6
    • /
    • pp.303-310
    • /
    • 2014
  • In this study, the average in-situ stress in metallic thin film was measured during deposition of the Cu thin films on the Si(111) wafer and then the phenomenon of stress shift by the interruption of deposition was measured using Cu thin films. We have observed the stress shift in accordance with changing amount of atom's movement between the surface and grain boundary through altering the grain size of the Cu thin film with variety of parameters. The grain size is known to be affected on the deposition rate, film thickness and deposition temperature. As a experimental results, the these parameters was not adequate to explain stress shift because these parameters affect directly on the amount of atom's movement between the surface and grain boundary as well as the grain size. Thus, we have observed the stress shift toward tensile side in accordance with the grain size changing through the interlayer deposition. From an experiment with inserting interlayer before deposit Cu, in thin film which has big grain size with high roughness, amount of stress movement is higher along direction of tensile stress after deposition that means, after deposition process, driving force of atoms moving in grain boundary and on the surface of the film is relatively higher than before.

Physico-ecological Studies on Korean Seed-mustard I. Effects of Varieties and Seeding Date on the Variation of Agronomic Traits (한국산 개자(Brassica juncea)의 재배학적 특성연구 I. 수집품종의 특성 및 파종기 차이에 따른 주요형질의 변이)

  • 이종일;이상래;최형국;권병선
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.30 no.2
    • /
    • pp.146-153
    • /
    • 1985
  • To investigate the possibility of improvement of seed mustard varieties, these experiments were conducted at Muan in Chonranamdo for three years with five local seed mustard varieties and seeding dates. Local varieties collected from Seoul, Cheju and introduced from Japan showed earlier bolting date while Yungsanpo and Suweon varieties bolted later and Suweon variety exhibited the latest maturity. Suweon variety had the shortest plant height with higher number of grains per pod. Seoul and Yungsanpo varieties had more total branch numbers than others. There was no varietal difference in grain weight, pod length and one liter weight. Grain yield per 10a was highest in Seoul variety by 247.5kg. Late seeding date delayed the bolting and flowering date while plant height, total branch numbers, pod numbers per ear and grain number per pod were decreased. The magnitude of varietal response to seeding date was varied greatly with traits. Grain weights per liter, 1,000 grain weight, pod lengths, oil contents, and fatty acid compositions were not affected by the different seeding dates.

  • PDF

Effect of Meteorological Condition during Ripening on the Grain Shattering of Rice Plant (등숙기 기상조건이 벼알의 탈립성에 미치는 영향)

  • J. C. Shin;Y. W. Kwon;C. J. Chung
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.27 no.3
    • /
    • pp.229-234
    • /
    • 1982
  • Environmental factors are known in general to influence much on the development of abscission layer and thereby on shedding of plant parts. The present study was carried out to determine the effect of meterological condition during ripening on the grain shatterability of rice plants at harvest. Different meteorological conditions were obtained by shifting transplanting timing of 40 days old rice seedlings 4 times with a 15 days-interval. Grain shatterability was measured as tensile strength of rice grains: it varied within a range of 214g. to 251g. in a practically non-shattering Japonica variety'Jinheung' and l27.5g. to 204g. in an easy shattering Indica \times Japonica progeny variety'Taeback'. In view of field loss of rice, the variation in tensile strength with time of transplanting and harvest did not matter in Jinheung, but was an important factor in Taeback. In Taeback the tensile strength was significantly correlated positively with mean, maximum and minimum air temperature and relative humidity during a certain period of grain ripening, especially during 30 days period before harvest, but diurnal range of air temperature showed a significant, negative correlation with it. The tensile strength seemed to be more closely related with min. air temperature than max. air temperature, and it was not significantly correlated with radiation amount during any period of pre-harvest. Meteorological effect on grain shatterability may vary with variety, but temperature regime during ripening appears to play major role among the meteorological factors in easy shattering and more thermophilic Indica \times Japonica varieties: lower the temperature, greater the shatterability.

  • PDF

Effect of Planting Time on Seed Production of Vegetable Soybean at Different Locations (풋콩 재배지에 따른 파종시기가 종자생육에 미치는 영향)

  • Baek, In-Youl;Shin, Doo-Chull;Park, Chang-Kie;Lee, Jin-Mo;Suh, Hyung-Soo
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.40 no.1
    • /
    • pp.44-51
    • /
    • 1995
  • This investigation was conducted to determine the effect of the optimum planting date and place for good seed production on growth variation, grain yields, different of variety, infection of seed by fungi, and seed germination and vigor after room storage. Early maturity Korean soybean variety, Keunolkong, and introduced vegetable soybean variety, Fukura-edamame, were planted at field of YAES. and high cool land of Sajapyong in Milyang(altitude, 850m) on May 15 (early), June 15 (mid.), and July 15 (late) in 1991. The emergence and vegetative period gradually increased in the early planting date. The grain yield, seed weight, pod number, healthy grain yield also increased when Keunolkong was planted on early date. The healthy seed rate, Keunolkong increased in the early planting date, whereas that of Fukura also increased in the late planting date. Infection ratio of grain to phomopsis seed decay (Phomopsis spp. ' Diaporthe phaseolorum) in Fukura steadily increased in the early planting date. Infection ratio of grain to purple seed stain (Cercospora kikuchii) generally increased in the mid and late planting date. The seed germination and seedling vigor after room storage from five to six months gradually increased in the late planting date. And seed germination of Fukura rapidly decreased in the early planting date. Therefore, the optimum planting date for good seed production in early maturity vegetable soybean was June 15 in terms of harvesting time avoid a high temprature and humidity.

  • PDF

A Forward Speed Control of Head-feed Combine Using Continuously Variable V-belt Transmission -Combine Load Characteristics- (V-벨트 무단변속기(無斷變速機)를 이용(利用)한 자탈형(自脫型) 콤바인의 주행속도(走行速度) 제어(制御)(I))

  • Choi, K.H.;Ryu, K.H.;Cho, Y.K.;Park, P.K.
    • Journal of Biosystems Engineering
    • /
    • v.16 no.2
    • /
    • pp.124-132
    • /
    • 1991
  • This study was carried out to obtain the information needed in the development of forward speed control system and the improvement of combine performance. The effects of variety, grain moisture content and forward speed on the combine load characteristics were investigated through experiments. The results of this study are summarized as follows. 1. A data acquisition system was developed to measure the engine speed and the torques and speeds of the threshing cylinder, dean-grain auger and tailings-return auger. The system consisted of transducers, signal conditioner, interface board and microcomputer. The system accuracy is better than ${\pm}2.3%$ full scale. 2. Linear regression equations were obtained for the torque, speed and power requirement of threshing cylinder for different paddy varieties, grain moisture contents and feed rates. 3. The maximum value of relative frequency for threshing cylinder torque decreased as the increase in feed rate and moisture content. The range of torque fluctuation was 1.2~3.7 and 1.2~1.9 times the average and maximum torque, respectively. The maximum value of power spectrum density (PSD) appeared to be about 11 Hz regardless of paddy variety, grain moisture content and feed rate. 4. The speed of tailings return thrower decreased rapidly at below 900rpm, and it fell to near zero about 3 seconds after that time. When the travelling of combine harvester was stopped immediately after sensing the overload, it took about 7 seconds for a full recovery of the no-load speed of tailings return thrower.

  • PDF

Studies on Varietal Resistance to Sheath Blight Disease in Rice IV. Varietal Difference in Disease Severity and Grain Yield Loss (벼 품종의 잎집무늬마름병 저항성연구 IV. 발병정도와 수량감소률의 품종간 차이)

  • Kwang-Ho Kim
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.34 no.1
    • /
    • pp.14-22
    • /
    • 1989
  • Rice varieties showing different degree of resistance were compared with their yield losses due to the damage of sheath blight disease in field condition through 1985 to 1986. Gayabyeo showed the lowest value of disease severity among 5 varieties tested in 1985 and 8 in 1986. and Taebaekbyeo, Kwanakbyeo and Labelle showed higher value of disease severity under the condition of artificial or natural disease inoculation. Grain yield of Gayabyeo, a moderate resistant rice variety, was reduced by 0.3 to 5% in the rate due to sheath blight disease damage and Taebaekbyeo. a susceptible variety. showed the highest in the rate of yield loss, 6.8 to 25.8 %. The matured grain rate and 1000-grain weight of the matured tiller were decreased when the developing disease lesion reached to the flag leaf, and then panicle weight was decreased more than 25 % compared with panicle of healthy culm. In conclusion, Gayabyeo showed the lower rate of yield loss because of slow development of disease to the upper leaves after initial disease occurence on the lower parts of rice plants.

  • PDF

Studies on the Fruiting Phase of Rape Under the Different Cultural Conditions

  • Kae, B.M.
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.12
    • /
    • pp.77-87
    • /
    • 1972
  • The fruiting phase of rape under transplanting and direct-sowing conditions has been studied at Mokpo during the 2 years period from 1970 to 1971. Two varieties, Yudal and Miyuki were used in this study. The planting space and sowing time were also incorporated into this study. The results could be summarized as follows: 1. The plant tape of rape was nearly umbrella-shaped of all, but has changed to the laid elliptical-shaped, broadly ovate and spindle-shaped under different varieties and cultural conditions in the plant diagram(Fig. 2). 2. The length of the primary branches for each nodes had a tendency to the symmetric apical curve with the apex at the upper 10-12th node in the transplanting. but to the upper bias apical curve with the apex at the upper 5-7th node in the dense-sowing(Fig.3). 3. The ear of main stem was longer, more pods, heavier 1, 000 grains and more grain yield than ear of primary branches of all, Especially, as for that, the rate of yield constitution per plant in the direct-sowing was higher than in the transplanting(Fig. 4, 5, 6, 7, 8, 9). 4. The ear-length of the primary branches for each nodes had a tendency to the relatively slowly apical curve with the apex at the upper 3-4th node in the transplanting, but to the lower bias apical curve with the apex at the upper 2nd node in the dense-sowing. Especially, the possibility of growth at the lower ears was few in the early variety (Fig. 4). 5. The number of pod per ear on the primary branches for each nodes had a .tendency to the curve of ear-length with the apex at the upper 5-8thnode in the transplanting and at the upper 4-5th node in the dense-sowing (Fig. 5). Accordingly, a high positive correlation was found between the ear-length and number of pod per ear (Table 2) 6. In the transplanting, the high rate of effective ear was from the upper nods to the 12th node, but below the 16-17th nodes was ineffective. However, in the early dense-sowing the high rate of effective was to the 7th node. but below the 10th nodes was. ineffective. Especially, in the early variety has difficult to secure of poi-numbers for ineffective of the lower nodes(Fig. 6.). 7. The density of pod setting of the ear of main stem was the longest of all ears, and the lower nods were, the shorter it became. That had a tendency to the evidently apical growth. However. in the early variety, it was lengthened according to growth of ear-length(Fig.7). 8. The pod-length of the medium nodes was longer than the upper and lower, and the possitive correlation between pod-length and number of grain per poi was very high(Table 2.). 9. In the grain yield per node of primary branches, the most yielding node of transplanting was the upper 9th node, of dense-sowing 4-5th node(Fig 8.), and the possitive correlation between grain yield per node and ear-length or number of pod per ear was very high(Table 2). 10. The grain yield of ear of main stem was higher than that of primary branches in the percentage of dependence for grain yield per plant. The limint node of 50% of dependence to cumulative grain yield per plant was the upper 7-8th node in tranplanting, in the early dense-sowing 4-5th node, and in tke late dense-sowing-3th node(Fig. 9). 11. In the weight of 1, 000 grains the lower nodes were, the lighter it becames in dense-sowing. Therefore, this was also lighter than in the transplanting to the (Fig. 10.). 12. The oil content of grain at the medium nodes was low in the early variety, but at the ear of main stem and upper 1st node it was extremely high(Fig. 11.).

  • PDF

Production and Quality Parameters of Oat Grown in Conventional/Organic Farming

  • Petr Konvalina;Ivana Capouchova
    • Proceedings of the Korean Society of Crop Science Conference
    • /
    • 2022.10a
    • /
    • pp.19-19
    • /
    • 2022
  • Hulled and naked oat is a perspective crop for the low input production systems due to its low requirements for soil quality and nutrition. Oats have good competitive ability against weeds and can provide appropriate yield in organic farming in comparison with other cereal species such as wheat or barley. It is a perspective crop from the point of view of use in the food industry too. The aim of our study was to compare the production and quality parameters of naked and hulled oat grown in both organic (OF) and conventional fields (CF). Small plot trials were conducted in two locations in the Czech Republic (České Budějovice, Prague) for four years (2018-2021) in two production systems (OF, and CF). We used four varieties of hulled oat (Korok, Kertag, Raven, Seldon) and one variety of naked oat (Patrik). During the vegetation, agronomically important data were recorded. After harvest samples were processed in the laboratory and analyzed selected quality parameters of grain dry matter (the protein content was determined by the Kjeldahl method, starch content in grain according to Ewers, fat content in grain dry matter by the modified method according to Soxhlet, and ash content in grain dry matter). The data were evaluated using the program STATISTICA version 13.2, StatSoft, Inc., California, USA. It is clear from the results that the number of panicles before the harvest was influenced by the location, cultivation system, year, and, to a lesser extent, the influence of the variety. The number of panicles in OF averaged 340 per square meter, which was 90% of the value of CF. For thousand grain weight (TGW), a significantly predominant effect of year was found. The independent effect of location on TGW was statistically not significant. Grain yield was predominantly influenced by cultivation system and location. In OF, it reached an average of 3.97 t.ha-1, which was 75% of the yield of CF. As part of the evaluation of the basic grain quality indicators, the content of protein, starch, fat, and ash in the dry matter of the grain was evaluated. The content of protein in the dry matter of the grain was predominantly influenced by year, followed by the influence of the variety and a fairly comparable influence of the cultivation system and locality. On average, it achieved 16.05% in OF and 17.01% in CF. The starch content was then related to the protein content, where as a result of the lower protein content in the grain of OF oats, the content of starch and fat was on the contrary increased. The year turned out to be the most significant factor, affecting both the starch content in the dry matter of the grain and the fat content. This was followed again by a fairly comparable influence on the cultivation system and locality. The influence of the cultivation system and location was not statistically significantly applied in the case of ash content in dry matter. Based on our results we can propose both types of oat (hulled and naked) as perspective crops for OF. An organic farmer can expect to achieve stable yields which, in less favorable conditions for the production of cereals in the OF, may be close to the level of conventional yields. In the future, it will be important to change agrotechnology in OF and increase oat yield because this crop has a good potential to grow in areas with low nitrogen input or less fertile soil.

  • PDF

Variation of Grain Shattering under Different Environmental Conditions in Rice (환경차이에 따른 수도 탈립성 변이)

  • 김호영;손재근;이수관;정근식
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.31 no.3
    • /
    • pp.311-317
    • /
    • 1986
  • To obtain the basic informations on the variation of rice grain shattering under different environmental conditions, several experiments were carried out from 1982 to 1985. The degree of grain shattering was significantly differed depending upon the harvesting time after heading in some rice varieties. It appeared that the ratio of grain shattering was greatly affected by the drying period after harvesting; the ratio of grain shattering of sun-dried seeds for 6 days after harvesting was higher than those of the just harvested seeds. Grain shattering was increased at high level of nitrogen and decreased with delay in transplanting date. Yearly differences in grain shattering was more clearly recognized in easy-shattering varieties in comparison with those of non-shattering varieties. Rice grain shattering also increased by the low temperature treatment (l7/15$^{\circ}C$, day/night) at booting stage, 5 to 11 days before heading. A rice variety, Milyang 23, belong to easy shattering group was more pronounced at the low temperature condition with shading. In general, it was always possible to classify the cultivar differences between easy-shattering and non-shattering groups regardless of any environmental condition. Thus results suggested that rice grain shattering will be largely governed by genetic factors.

  • PDF