• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.11a
• /
• pp.44.2-44.2
• /
• 2009

Polycrystalline materials suchas yttria and alumina have been applied as a plasma resisting material for the plasma processing chamber. However, polycrystal line material may easily generate particles and the particles are sources of contamination during the plasma enhanced process. Amorphous material can be suitable to prevent particle generation due to absence of grain-boundaries. We manufactured nitrogen-containing $SiO_2-Al_2O_3-Y_2O_3$ based glasses with various contents of silicon and fixed nitrogen content. The thermal properties, mechanical properties and plasma etching rate were evaluated and compared for the different composition samples. The plasma etching behavior was estimated using XPS with depth profiling. From the result, the plasma etching rate highly depends on the silicon content and it may results from very low volatile temperature of SiF4 generated during plasma etching. The silicon concentration at the plasma etched surface was very low besides the concentration of yttrium and aluminum was relatively high than that of silicon due to high volatile temperature of fluorine compounds which consisted with aluminum and yttrium. Therefore, we conclude that the samples having low silicon content should be considered to obtain low plasma etching rate for the plasma resisting material.

• Journal of Nutrition and Health
• /
• v.29 no.5
• /
• pp.528-532
• /
• 1996

The purpose of this study was to analyse copper intake and effect ofZn(30mg ZnSO4/d) supplementation on plasma copper level of Korean adults. Daily Cu intakes were studied in ninety subjects aging 20-20 years. Among them twenty four subjects participated in 6 weeks Zn supplementation study. The men consumed 1.47($\pm$0.64)mg of Cu and the women consumed 0.98($\pm$0.43)mg of Cu daily. the most abundant sources of Cu was meat, fish, egg and soybean group, the second was cereal and grain group and the third was vegetable group. These three groups supplied about 90% of copper in the subjects. The plasma copper level of the subjects was not changed much until two weeks of Zn supplementation. However, after two weeks of Zn supplementation plasma copper level was reduced continuously during the experiment. There was no significant difference in plasma Cu level between control and supplement group of the men, while the supplemented women showed significantly lower plasma Cu level than control group at week 4(p<0.01) and week 6(p<0.05). Although plasma Cu level of the subjects was slightly changed, its concentration in plasma was still in normal range in all groups and no one showed clinical Cu deficiency. Therefore the Zn supplementation of RDA level doesn't seem to cause any adverse effect on Cu status.

• The Bulletin of The Korean Astronomical Society
• /
• v.35 no.2
• /
• pp.40.2-40.2
• /
• 2010

Polycyclic aromatic hydrocarbon (PAH) features have emerged as one of the most important infrared (IR) features since these PAH features dominate mid-IR spectra of galaxies and are ubiquitous within galactic and extragalactic objects. These PAH features have the potentials to become reliable star formation rate (SFR) proxies and diagnostics of physical conditions of interstellar medium, such as ionization states of dust grains and grain sizes. While constructing an unbiased library of 44 sample galaxies selected from 5MUSES sample, AKARI mJY Unbiased Survey of Extragalactic Sources in 5MUSES (AMUSES) intends to measure and to calibrate the PAH 3.3 mm emission feature which has not been studied extensively due to its weak strength and dearth of capable instruments. Out of 20 target galaxies, we detected the 3.3mm feature from eight galaxies and measured their line strengths, line widths and line ratios with other PAH emission features. Sample galaxies whose spectral energy distributions (SEDs) are classified as starburst-type have clearly stronger 3.3mm emission features than ones with AGN-type SEDs. We also found that there is a correlation between the PAH 3.3mm luminosity and total IR luminosity within our sample galaxies, albeit a large scatter. We further discuss implications of our results.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.26 no.3
• /
• pp.540-548
• /
• 1997

According to the data published in 1990s on the intake of dietary fiber(DF) of Korean, DF intake of Korean has been gradually decreasing in the last two decades. Mean daily intake of DF in 1990s is estimated to be in the rage of 17-20g per capita and over seventy five percent of the subjects examined appeared to consume DF less than 20g per day. The major food sources of Df in Korean diet include cereals, vegetables, fruits, seaweeds and seasonings. The present level of DF intake of Korean is lower than the tentatively recommended minimum intake of DF. It is predicted that, if the present trend of change on food consumption pattern is maintained, the gradual increases in the incidence of chronic degenerative diseases will be continuing. Therefore, the beneficial effects of DF on health care and disease control should be emphasized through the nutritional education and high level consumption of DF needs to be strongly recommended in the dietary guideline. In order to raise the daily consumption of DF, more whole grain cereals need to be used as a part of staple and more frequent intake of legumes and seaweeds is required as well as the development of high-fiber diet recipes and natural high-fiber products.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2010.05a
• /
• pp.11.2-11.2
• /
• 2010

Photovoltaic devices are promising candidates as affordable and large-area renewable energy sources, which can replace the fossil-fuel-based resources. Especially, thin film solar cells have attracted increasing research attention, since they have a great advantage of low production cost. From the physical point of view, the photovoltaic devices can provide us interesting questions, how to enhance the light absorption and the carrier collection efficiency. A lot of approaches would be possible to address these issues. We have focused on two major topics relevant to photovoltaic device physics; (1) light management using surface plasmons and (2) junction characterizations aiming at proper interface engineering. Regarding the first topic, we have investigated the influences of Ag under-layer morphology on optical properties of ZnO thin films. The experimental results suggested that coupling between the surface plasmon polaritons at the ZnO/Ag interface and excitons in ZnO should play important roles in reflectivity of the ZnO/Ag thin films, which are widely used back reflector structures in thin film solar cells. For the second topic, we have carried out scanning probe microscopy studies of Schottky junctions consisting of photovoltaic materials. Such a research is very helpful to understand the correlation between the defects (e.g., grain boundaries) and local electrical properties. We will introduce some of the recent experimental results and discuss the physical significance.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.28 no.2
• /
• pp.129-138
• /
• 2008

Demand for alternatives to petroleum is increasing the production of biofuels from food crops such as corn, soybeans, sorghum and sugarcane, etc. At least for the next 5 years, ethanol demand will be increased greatly in the United States and in the world. Presently, most ethanol produced in the United States is corn (Zea mays) ethanol. As a result, especially in the Americas and Southeast Asia, agricultural land is diverted to biofuel production. Even though biofuel industry has many advantage including national security, economical, energetical and sustainable impacts, it is driving grain prices up and creating considerable concern about the potential negative impacts on a wide range of food products that depend on gain : chicken, pork, beef, and dairy products such as milk, cheese, yoghurt, cream and ice cream. Feedstock crops are crops such as switchgrass(Panicum virgatum, L.), corn stover and grasses that can be used in industrial processes such as fermentation into alcohol fuels. Feedstock is no compete with food. Furthermore it is friendly environmental bioenergy crops. In Korea, with increasing demand for fossil fuels the exploration of alternative sources of liquid fuel is inevitable. I suggest Korea need to research and to develop actively on feedstock for biofuel production through this review.

• Korean Journal of Materials Research
• /
• v.28 no.2
• /
• pp.101-107
• /
• 2018

Li-incorporated ZnO thin films were deposited by using ultrasonic-assisted spray pyrolysis deposition (SPD) system. To investigate the effect of Li-incorporation on the performance of ZnO thin films, the structural, electrical, and optical properites of the ZnO thin films were analyzed by means of X-ray diffraction (XRD), field-emssion scanning electron microscopy (FE-SEM), Hall effect measurement, and UV-Vis spectrophotometry with variation of the Li concentraion in the ZnO sources. Without incorporation of Li element, the ZnO surface showed large spiral domains. As the Li content increases, the size of spiral domains decreased gradually, and finally formed mixed small grain and one-dimensional nanorod-like structures on the surface. This morphological evolution was explained based on an anti-surfactant effect of Li atoms on the ZnO growth surface. In addition, the Li-incorporation changed the optical and electrical properties of the ZnO thin films by modifying the crystalline defect structures by doping effects.

• Journal of the Korean Ceramic Society
• /
• v.43 no.9 s.292
• /
• pp.582-587
• /
• 2006

Decomposition behavior of $ferro-Si_3N_4$was investigated with varying temperature and holding time in mud components for high temperature refractory applications. Porosities gradually increased with increasing temperature and holding time due to the carbothermal reduction of $Si_3N_4\;and\;SiO_2$. Silicon monoxide (SiO) as a intermediate resulted from evaporation of $Si_3N_4\;and\;SiO_2$ reacted with C sources to generate needle-like ${\beta}-SiC$ and Fe in $Si_3N_4$ acted as a catalyst in order to enhance growth of SiC grain with the preferred orientation. SiC generation yield increased with increasing holding time, all of the $Si_3N_4\;and\;SiO_2$ affected on SiC formation up to 2h. However, SiC generation was only dependent on residual $SiO_2$ over 2h, because the carbothermal reduction reaction of $Si_3N_4$ was no longer possible at that time.

• Journal of the Speleological Society of Korea
• /
• v.34 no.35
• /
• pp.78-104
• /
• 1993

Analysis of one sinkhole, the Dodgeville sinkhole, developed in Ordovician dolostones in the Driftless Area of Wisconsin in the Upper Midwest'd Driftless Area reveals homogenous clayey sediment fills reflecting a range of dissolutional processes during the Quaternary or Pre-Quaternary. Granulometric analysis, graphical moments statistics, carbonate minerals, ana sand grain lithology were used to differentiate sinkhole sediment sources and modes of accumulation. Sediments in the dolostone sinkholes developed by dissolution. Sediments contain two major types of sediments : residual redish clay( autogenic sediments) and aeolian silt (allogenic sediments). The massive clay is generated from the weathered dolostone bedrocks as a in situ materials. The loessial silt is mostly derived from transportation of the surrounding surface materials, with some evidences of penetrated deposition. Unlike the collapsed sandstone sinkholes (Oh et al., 1993), dolostone sinkholes reveal homogenous, autogenic clay materials, and a geochemical composition indicative of in situ autogenic karstification. Dolostone sinkhole si1ts (26.9%) and sands (34.9%) are derived from weathered Plattevi1le-Galena dolostones, and contain high carbonate(37.5%), chert (57.2%) and lead ore (3%). Graphical moments statistics for sorting, skewness, and kurtosis indicate that sand grains from dolostones were derived entirely from local bedrock by in situ dissolution. Upper sinkhole sediments are pedagogically very young as carbonate is unleashed. Materials of the sinkhole sediment are definitely inherited from internal dolostones by dissolution and weathering, because not only a granulomatric comparison of dolostone and sandstone sediments demonstrates that they have heterogeneous paticle size distributions, but also 1ithologic analyses displays they differ completely.

• Korean Journal of Agricultural Science
• /
• v.9 no.1
• /
• pp.357-370
• /
• 1982

Recent concern regarding price and availability of fossil fuels has spurred the interest in alternative sources for farm crop drying. Among the available options such as biomass energy, wind power, nuclear energy and solar energy etc., the increasing attention is being directed to the utilization of heat from solar energy especially for farm crop drying. Even though solar energy is dispersed over a large land area and only a relatively small amount of energy can be simply collected, the advantages of solar energy is that the energy is free, non-polluting. The study reported here was designed to help supply the informations for the development of simple and relatively inexpensive solar warehouse for farm crop drying and storage. Specifically, the objectives of this study were to determine the performance of the solar collector fabricated, to compare solar supplemented heat drying with natural air drying and to develop a simulation model of temperature in stored grain, which can be used to study the effects due to changes in ambient air temperature. For those above objectives, solar collector was fabricated from available materials. Corrugated steel galvanized sheet, painted flat black, was used as absorbers and clear 0.2mm polyethylene sheet was the cover material. The warehouse for rough rice drying and storage was constructed with concrete block, and the solar collector was used as the roof of warehouse instead of original roofing system of it. The results obtained in this study were as follows: 1. The thermal efficiency of the solar collector was average 26 percent and the overall heat transfer coefficient of the collector was approximately $25kJ/hr.m^2\;^{\circ}K$. 2. Solar heated air was sufficient to dry one cubic meter of rough rice from 23.5 to 15.0 percent in 7 days and natural air was able to dry the same amount of rough rice from 20.0 to 5 percent in l2 days. 3. Drying with solar heat reduced the required drying time to dry the same amount of rough rice into a half compared to natural air drying, but overdrying problems of the bottom layer were so severe that these problems should be thoroughly analyzed. 4. Simulation model of temperature in stored grain was developed and the results of predicted temperature agreed well with test results. 5. Based on those simulated temperature, changes in the grain-temperature were a large at the points of the wallside and the damage of the grain would be severe at the contact area of wall.