• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.269-269
• /
• 2006

The molecular structure of poly(2,6-dimethyl-4,4' -phenylene oxide)-g-poly (styrenesulfonic acid) (PPO-g-PSSA) graft copolymer was designed, and synthesized via living radical polymerization. Obtained graft copolymers were transformed into proton exchange membranes for direct methanol fuel cell (DMFC) application. The performance of the membranes was measured in terms of water uptake, proton conductivity, methanol permeability, and thermal stability. Very low methanol permeability and good proton conductivity were observed by adjusting grafting frequency and PSSA block content.

• Proceedings of the Membrane Society of Korea Conference
• /
• 2008.05a
• /
• pp.73-76
• /
• 2008

• Applied Chemistry for Engineering
• /
• v.5 no.1
• /
• pp.182-188
• /
• 1994

Poly(butadiene-g-MMA) was synthesized by grafting methyl metharcylate on polybutadiene which is intrinsically incompatible with poly(mothy methacrylate)(PMMA) and this graft copolymer was blended with PMMA. Mechanical properties of PMMA-poly(butadiene-g-MMA) blends and PMMA-polybutadiene blends, such as impact strength, tensile strength and haze were determined. Morphological changes of the blends as a function of graft percentage were observed by scanning electron microscopy. Mechanical properties of PMMA-poly(butadiene-g-MMA) blends were better than PMMA-polybutndiene blends. Especially, mechanical properties of PMMA-poly(butadiene-g-MMA) blends were improved nth increasing graft percentage of MMA.

• Applied Chemistry for Engineering
• /
• v.4 no.1
• /
• pp.188-195
• /
• 1993

Polyelectrolyte complexes and graft copolymers as biomaterials were synthesized from the water soluble cellulose derivatives. Polyelectrolyte complexes have been prepared from carboxymethyl cellulose (CMC) and gelatin. Graft copolymers(Mc-g-AA) were synthesized by grafting acrylic acid (AA) onto methyl cellulose(MC). (Mc-g-AA) and gelatin polyelectrolyte complexes were also prepared. The optimum conditions of each sample were investigated after chemical crosslinking or heat treatment. The preliminary results show that these materials might be interesting for biomedical applications.

• Macromolecular Research
• /
• v.13 no.6
• /
• pp.483-490
• /
• 2005

A novel, polysaccharide-based, superabsorbent hydrogel was synthesized through crosslinking graft copolymerization of methacrylic acid (MAA) onto kappa-carrageenan ($_{k}C$), using ammonium persulfate (APS) as a free radical initiator in the presence of methylenebisacrylamide (MBA) as a crosslinker. A proposed mechanism for $_{k}C$­g-polymethacrylic acid ($_{k}C$-g-PMAA) formation was suggested and the hydrogel structure was confirmed using FTIR spectroscopy. The effect of grafting variables, including MBA, MAA, and APS concentration, was systematically optimized to achieve a hydrogel with the maximum possible swelling capacity. The swelling kinetics in distilled water and various salt solutions were preliminarily investigated. Absorbency in aqueous salt solutions of lithium chloride, sodium chloride, potassium chloride, calcium chloride, and aluminum chloride indicated that the swelling capacity decreased with increased ionic strength of the swelling medium. This behavior can be attributed to the charge screening effect for monovalent cations, as well as ionic crosslinking for multivalent cations. The swelling of super absorbing hydrogels was measured in solutions with pH ranging from 1 to 13. In addition, the pH reversibility and on-off switching behavior, at pH levels of 3.0 and 8.0, give the synthesized hydrogels great potential as an excellent candidate for the controlled delivery of bioactive agents.

• Polymer(Korea)
• /
• v.24 no.6
• /
• pp.751-756
• /
• 2000

The copolymerization of ethylene (E) and cycloolefin (CO) was carried out with rac-Et(Ind)$_2$ZrC $l_2$ and MMAO cocatalyst system to examine the effect of CO structure on catalytic behaviors and properties of copolymer (COC). Various cycloolefins such as norbornene (N), 5-phenyl-2-norbornene (PN) and 5-vinyl-2-norbornene (VN) were used as comonomers. With increasing [CO]/[E] feed ratio, the catalytic activity decreased while the glass transition temperature of copolymer increased. With analysis of the structure of E/VN copolymer by FT-IR and $^{l3}$C-NMR, it was found that the cyclic C=C bond of VN comonomer is selectively polymerized and the vinyl C=C bond remains unreacted. The resulting vinyl C=C bond attached into copolymer provided the functionalization moiety using glycidyl methacrylate.e.

• Macromolecular Research
• /
• v.13 no.1
• /
• pp.45-53
• /
• 2005

In this study, a series of highly swelling hydrogels based on sodium alginate (NaAlg) and polymethacryl­amide (PMAM) was prepared through free radical polymerization. The graft copolymerization reaction was performed in a homogeneous medium and in the presence of ammonium persulfate (APS) as an initiator and N,N'-methylenebis­acrylamide (MBA) as a crosslinker. The crosslinked graft copolymer, alginate-graft-polymethacrylamide (Alg-g­PMAM), was then partially hydrolyzed by NaOH solution to yield a hydrogel, hydrolyzed alginate-graft-poly­methacrylamide (H-Alg-g-PMAM). During alkaline hydrolysis, the carboxamide groups of Alg-g-PMAM were converted into hydrophilic carboxylate anions. Either the Alg-g-PMAM or the H-Alg-g-PMAM was characterized by FTIR spectroscopy. The effects of the grafting variables (i.e., concentration of MBA, MAM, and APS) and the alkaline hydrolysis conditions (i.e., NaOH concentration, hydrolysis time, and temperature) were optimized systematically to achieve a hydrogel having the maximum swelling capacity. Measurements of the absorbency in various aqueous salt solutions indicated that the swelling capacity decreased upon increasing the ionic strength of the swelling medium. This behavior could be attributed to a charge screening effect for monovalent cations, as well as ionic cross-linking for multivalent cations. Because of the high swelling capacity in salt solutions, however, the hydrogels might be considered as anti-salt superabsorbents. The swelling behavior of the superabsorbing hydrogels was also measured in solutions having values of pH ranging from 1 to 13. Furthermore, the pH reversibility and on/off switching behavior, measured at pH 2.0 and 8.0, suggested that the synthesized hydrogels were excellent candidates for the controlled delivery of bioactive agents. Finally, we performed preliminary investigations of the swelling kinetics of the synthesized hydrogels at various particle sizes.

• Elastomers and Composites
• /
• v.48 no.1
• /
• pp.30-38
• /
• 2013

Polyolefin is one of the most important commodity polymers having excellent physical properties and cost competitiveness, which has continuously broadened their market in response to a heavy demand from industry. However, the lack of polarity in polyolefin has limited its applications, especially where interactions with other materials are important. In view of the above, the incorporation of polar functional groups in polyolefin has been widely attempted. Especially, the preparations of segmented modified polyolefin copolymers, such as block and graft copolymers have been extensively investigated, since the loss of the original properties of polyolefin can be minimized while the polar segments can endow interactions with other materials. Living radical polymerization (LRP) method can be one of the most attractive synthetic tools for the preparation of the modified polyolefin block or graft copolymers. In this review, progress on the preparation of the polyolefin based block or graft copolymers through LRP technique is briefly summarized.

• Polymer(Korea)
• /
• v.35 no.3
• /
• pp.223-227
• /
• 2011

Stimuli-responsive polymers have been investigated as the materials playing the critical roles in various applications. Thermoresponsive graft copolymers, poly (N-isopropylacrylamide)-g-hyaluronic acid (PNIPAAm-g-HA) and elastin-like peptide-g-hyaluronic acid (ELP-g-HA), were synthesized by coupling carboxylic polymers (PNIPAAm-COOH or ELP) to biocompatible HA through amide linkages. Thermoresponsive behavior was observed in both the copolymers, and the results of turbidity measurement were consistent with the results of rheological examination. Among the two copolymers, the ELP graft copolymer shows less cooperative LCST transition than the PNIPAAm case. As the content of graft chains of PNIPAAm and ELP increases, viscosity increases, and the increase was larger in PNIPAAm case at a graft content. These results shows us that the introduction of grafts provides thermosensitivity to biocompatible HA, whose characteristics can be engineered.

• Applied Chemistry for Engineering
• /
• v.3 no.1
• /
• pp.130-137
• /
• 1992

The Graft copolymerization of acrylonitrile(AN) and styrene(ST) onto chloroprene rubber(CR) were carried out with benzoyl peroxide(BPO) as an initiator. The synthesized graft copolymer(ACS) was separated from polymeric mixture by the extraction with ethyl acetate and n-hexane, acetone and methanol, dimethylformamide(DMF) and methanol mixed solvent systems. The graft copolymer obtained, acrylonitrile-chloroprene-styrene(ACS) was identified by IR spectrophotometer. The effect of mole ratio of styrene to acrylonitrile, reaction time and temperature, initiator concentration, CR content and solvents on graft copolymerization were examined. It was observed that the grafting efficiency increased with [ST]/[AN] mole ratio and reaction time. The grafting efficiency increased with increasing initiator concentration and CR content. The maximum grafting efficiency was obtained when the mole ratio of [ST]/[AN] was 1.5 and reaction was made at 40hrs, and $70^{\circ}C$ using chloroform/toluene mixed solvent. The thermal properties, light resistance and flammability of ACS were compared with those of ABS and AES. It was found that flame retardancy of related polymers increased in the order ACS>ABS>AES. The thermal stability of ACS was greatly improved when compared with ABS or AES. Morphology of ACS was also investigated by using a transmisson electron microscope(TEM).