• Journal of the Korean Society of Clothing and Textiles
• /
• v.41 no.1
• /
• pp.184-195
• /
• 2017

Baseball is a life sport that gives vitality to people. However, currently available leg guards do not have a variety of sizes and it is very difficult to purchase a leg guard that is suitable for the size of a specific consumer. Therefore, this study investigated the size system of a leg guard sold in the market and suggested a grading deviation suitable for the legs of Korean males. The results of the study were as follows. First, most brands were sold only in three size systems as children's, teenagers, and adults. Adult size systems were not subdivided. Second, Korean male legs were classified into Group 1 (large girth and height and lower body muscle) and Group 2 (small girth and height and low underbody muscle). Third, the size system is based on vertical items such as height and mid-thigh circumference. Each group produced 10 sizes. The smallest height or the largest height was also found to be about 4.5 to 5.0cm smaller or larger than the sample size for each group. The total length of the leg guard was about 2.5cm when the height was increased or decreased by one size. It was confirmed that the deviation of the circumference of the mid-thigh should be about 2.0cm larger or smaller than the sample size even if the height is the same. The deviation of the knee circumference and ankle circumference was smaller than the other circumference. In conclusion, the dimension combinations of the leg guard must be set differently to provide a leg guard with high size suitability according to leg type.

• Journal of the Korean Society of Tobacco Science
• /
• v.16 no.1
• /
• pp.26-33
• /
• 1994

A tobacco ripeness grading meter was designed and constructed using the color sensor, its performance was evaluated. A degree of ripeness grading of a leaf is very closely related to the measured tobacco leaf color. Measuring the small amount of the reflectance precisely depends on the apparatus including color sensor, light source, detector sensitivity, and geometric characteristics of appratus. To analyze and minimize the variational effects, experiments to select the proper condition were performed. Because of the combined effect mentioned above, the system has some variation on its response. Basis on the results of the experiments, prototype was developed and interfaced to a computer system. The main components of prototype included a tungsten lamp as a light source, Amorphous full color sensor with three filters, regulated D.C. power supply, OP - AMP(741 TC) for amplification, AR - B3001 board for interfacing to a computer with analog to digital conversion, and a compatible IBM PC XT computer. The experimental results of the developed ripeness tobacco leaf measurement system are summarized as following: [1] The output readings of ripeness grade meter for tobacco leaf, which is based on harvesting time, showed the apparent difference in variety of different quality. It was considered suitable that three filters(red, green, blue) in Amorphous full color sensor could be used in four different ripeness degree measurement of tobacco leaf. [2] The output readings of ripeness grade meter for tobacco leaf, which is based on government procurement, showed apparent difference in variety of different quality. Tobacco leaf varieties to stalk position are divided into tips, leaf, cutters, and primings, It is considered suitable that only red filter in the sensor could be used to classify the grade of tobacco leaf within the same kind tobacco stalk. However, the ripeness grade meter was not adequate to classify all the tobacco grades in the four different tobacco leaves.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.11
• /
• pp.4867-4868
• /
• 2016

Prostatic adenocarcinoma is the commonest solid malignancy seen in Omani elderly males 60-80 years of age. The Gleason grade is the most widely used grading system for prostatic carcinoma and is recommended by the World Health Organization. A peer review was carried out at the Pathology Department of Sultan Qaboos University Hospital (SQUH), Oman, to assess the quality of reporting at the center. The aim of this study was to determine inter-observer variation among 7 pathologists working at a tertiary care center in Oman. A total of 47 consecutive prostatic biopsies were interdependently reviewed by seven pathologists and the results obtained were compared with each other and the original diagnosis. This peer review indicated a fair inter-observer agreement (0.482) among 7 pathologists in the department, with fair to moderate agreement when the results were compared to the reported diagnosis, comparable to the published literature. Dual and sub-specialty reporting are being instituted to improve the performance in this vital aspect of pathology.

• Journal of Veterinary Clinics
• /
• v.30 no.4
• /
• pp.278-282
• /
• 2013

This study was performed in 41 dogs with unilateral or bilateral medial patella luxation (MPL) and/or cranial cruciate ligament rupture (CCLR). These dogs were classified into 4 groups according to MPL grading system. Radiographic evaluation was performed for pelvis and stifle joint in the dogs. Norberg, inclination, quadriceps and femoral varus angle were measured and analyzed with MPL grading and the existence of cranial cruciate ligament rupture. The Norberg and inclination angle showed no differences between 4 grading groups and between CCLR and no CCLR groups. However, quadriceps and femoral varus angle were statistically different between grade 1, 2 and grade 3, 4 groups. They also have shown the statistical difference between CCLR and no CCLR group. Further studies for how these parameters affect the prognosis and the results of surgical treatment of MPL should be needed.

• Journal of the Korean Home Economics Association
• /
• v.38 no.10
• /
• pp.45-51
• /
• 2000

This study illucidated the importance of drop Value in the resets of surveying the current values of sizing and grading. Therefore, it is meaningful to get the classification of body form with the appropriate distribution of drop values of the body. The distribution of drop value and the frequency of each form is very helpful to name the combined sizing or coverage of ready-made clothes. This study aimed at classifying body forms with various drop values using multivariate analysis for sizing and grading. Factor analysis and cluster analysis were done using measured values from unmarried women. The resets are as follows; The factor which explains body forms was obtained by factor analysis, and the representative major 18 items which have important roles in classifying body forms were selected among the measured values with high factor loading and communality. 1) The body forms were classified into 3 groups based on the characteristics, frequencies and distributions of them obtained from cluster analysis. 2) Each classified body form showed conspicuous difference in drop value and the difference of body form mainly resulted from the difference between bust and hip(drop value) in Korean unmarried women. 3) Discriminant analysis showed that the most significant discriminant factor of the trunk classification were bust circumference, upper bust circumference, hip circumference and stature. 4) The cover ratio of size studied in this study for the Korean Sizing system for women's garment were founded high.

• Journal of the Korean Society of Tobacco Science
• /
• v.17 no.1
• /
• pp.5-14
• /
• 1995

Efficient algorithms for the automatic classification of flue-cured tovacco ripeness and grading have been developed The ripeness of the tobacco was classified into 4 levels vased on the color. The lab-built simple RGB color measuring system was utilized for detecting the light reflectance of the tobacco leaves. The measured data were used far training the artificial neural network The performance of the trained network was also tested far the untrained samples. The spectrophotometer was used to detect the light reflectance and absorption of the graded tobacco leaves in the frequency ranges of the visible light The measured data and the statistical analysis was performed to investigate the light characteristics of the graded samples. The measured data were obtained from samples of 5 different grades directly without considering the leaf positions. Those data were used far training the artificial neural network The performance of the trained network was also tested far the untrained samples. The neural network based sensor information processing showed successful results for grading of tobacco leaves.

• Journal of Animal Science and Technology
• /
• v.64 no.1
• /
• pp.155-165
• /
• 2022

As pork consumption increases, rapid and accurate determination of porcine carcass grades at abattoirs has become important. Non-destructive, automated inspection methods have improved slaughter efficiency in abattoirs. Furthermore, the development of a calibration equation suitable for non-destructive inspection of domestic pig breeds may lead to rapid determination of pig carcass and more objective pork grading judgement. In order to increase the efficiency of pig slaughter, the correct estimation of the automated-method that can accommodate the existing pig carcass judgement should be made. In this study, the previously developed calibration equation was verified to confirm whether the estimated traits accord with the actual measured traits of pig carcass. A total of 1,069,019 pigs, to which the developed calibration equation, was applied were used in the study and the optimal estimated regression equation for actual measured two traits (backfat thickness and hot carcass weight) was proposed using the estimated traits. The accuracy of backfat thickness and hot carcass weight traits in the estimated regression models through stepwise regression analysis was 0.840 (R²) and 0.980 (R²), respectively. By comparing the actually measured traits with the estimated traits, we proposed optimal estimated regression equation for the two measured traits, which we expect will be a cornerstone for the Korean porcine carcass grading system.

• Journal of the Korean Geotechnical Society
• /
• v.38 no.7
• /
• pp.25-37
• /
• 2022

In this paper, a small-scale model testing system was developed using a series of small-scale model tests to analyze the mechanism of compaction pile formation and evaluate the quality of controlled grading aggregates proposed as an alternative material to the sand compaction pile (SCP) method and granular compaction pile (GCP). These are the most typical ground improvement methods in field practice, particularly for soft grounds. However, the SCP has faced difficulties due to the supply shortage of natural sand and the corresponding price surge of sand. The GCP is limited in marine soft grounds because of the failure occurring at the pile tip caused by excessive expansion of the deeper bulbs, leading to uneven bulb formation. The uniformity of compacted pile bulbs is critical to ensuring the bearing capacity and quality of the compaction pile. This study aims to evaluate the performance of the new material and controlled grading aggregates using small-scale model tests simulating field compaction process to investigate its potential application in comparison with SCP. The compaction piles are examined in four cases according to different materials used for compaction pile and clay strength. The compaction pile materials, which are made of sand and controlled grading aggregates, used in this study were compared to reveal the mechanism of the bulb creation. The experimental data confirm that the bulb formation quality of the traditional sand and the new material, controlled grading aggregates are comparable. The compaction pile made of controlled grading aggregates presents higher bearing capacity than that of marine sand.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.3
• /
• pp.374-380
• /
• 2017

Image analysis and k-mean clustering were conducted to develop a grading system of dried sea cucumber (SC) based on rehydration rate. The SC images were obtained by taking pictures in a box under controlled light conditions. The region of interest was extracted to depict the shape of the SC in a 2D graph, and those 2D shapes were rendered to build a 3D model. The results from the image analysis provided the morphological features of the SC, including length, width, surface area, and volume, to obtain the parameters of the k-mean clustering weight. The k-mean clustering classified the SC samples into three different grades. Each SC sample was rehydrated at $30^{\circ}C$ for 40 h. During rehydration, the flux of each grade was analyzed. Our study demonstrates that the mass transfer rate of SC increased as the surface area increased, and the grade of SC was classified based on rehydration rate. This study suggests that the optimal rehydration process for SC can be achieved by applying a suitable grading system.

• Science of Emotion and Sensibility
• /
• v.13 no.4
• /
• pp.733-740
• /
• 2010

This proposal of eco-friendly Resort wear targeting medical tourists of Jeju intend to contribute to the local economy by creating more added-values and profits. With high-quality leisure outfits, the medical tourism could provide tourists more pleasantness as well as a souvenior, which may help them to cherish the memory in Jeju. Well-developed Galot leisure outfits matched with other Galot products could result in additionary buying of other Galot items. Furthermore, by developing the size system as well as pattern grading, we can help local Galot manufacturers who currently require these standardized creation system. The summary of this research is as follows: 1. we examined the current issues and disadvantages of the local Galot through a survey. 2. We defined the Galot leisure outfit for Jeju medical tourism, conducted market research, and reflected these into representative designs for them. 3. We developed a size system as well as a pattern grading to standardize the manufacturing process.