• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.23 no.4
• /
• pp.173-179
• /
• 2013

Even though a rough diamond shape is irregular and rugged, it is easy to be processed to make gem, shaped facets (table, crown, pavilion and girdle) were precisely treated because they influence on the evaluation of diamond grading. Those specifications suitable for the standard round brilliant cut diamond polishing were investigated and in 95 % statistical confidence interval, standard deviation, mean and acceptable tolerance were examined. According to these variables (size, angle, depth, and thickness) distribution, the frequency analysis of ratings and proportions were compared with each other. The correlation between each variables and the evidence of influence represented in proportion were determined by the regression analysis applying LSM (Least Square Method). In this research, it was recognized that table sizes of the diamond jewels and pavilion depth (in %) influence the rating decision and in particular, the depth of pavilion acting as the main factor of proportions, also plays an important role in optical phenomena.

• Journal of Biosystems Engineering
• /
• v.33 no.5
• /
• pp.348-354
• /
• 2008

Egg grading is determined by exterior and interior quality. Among the evaluation methods for the egg quality, a candling method is common to identify eggs with cracked shells and interior defects. But this method is time-consuming and laborious. In addition, practically, it is challenging to detect hairline and micro cracks. In this study, an on-line inspection system based on acoustic resonance frequency analysis was developed to detect hairline cracks on eggshells. A roller conveyor was used to transfer eggs along one lane to the impact position where each of eggs rotated by the roller was excited with an impact device at four different locations on the eggshell equator. The impact device was consisted of a plastic hammer and a rotary solenoid. The acoustic response of the egg to the impact was measured with a small condenser microphone at the same position as the impact device was installed. Two acoustic parameters, correlation coefficient for normalized power spectra and standard deviation of peak resonant frequencies, were used to detect cracked eggs. Intact eggs showed relatively high correlations among the four normalized power spectra and low standard deviations of the four peak resonant frequencies. On the other hand, cracked eggs showed low correlations and high standard deviations as compared to the intact. This method allowed a crack detection rate of 97.6%.

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.9
• /
• pp.1215-1221
• /
• 2016

The prediction of carcass composition in Hanwoo steers is very important for value-based marketing, and the improvement of prediction accuracy and precision can be achieved through the analyses of independent variables using a prediction equation with a sufficient dataset. The present study was conducted to develop a prediction equation for Hanwoo carcass composition for which data was collected from 7,907 Hanwoo steers raised at a private farm in Gangwon Province, South Korea, and slaughtered in the period between January 2009 and September 2014. Carcass traits such as carcass weight (CWT), back fat thickness (BFT), eye-muscle area (EMA), and marbling score (MAR) were used as independent variables for the development of a prediction equation for carcass composition, such as retail cut weight and percentage (RC, and %RC, respectively), trimmed fat weight and percentage (FAT, and %FAT, respectively), and separated bone weight and percentage (BONE, and %BONE), and its feasibility for practical use was evaluated using the estimated retail yield percentage (ELP) currently used in Korea. The equations were functions of all the variables, and the significance was estimated via stepwise regression analyses. Further, the model equations were verified by means of the residual standard deviation and the coefficient of determination ($R^2$) between the predicted and observed values. As the results of stepwise analyses, CWT was the most important single variable in the equation for RC and FAT, and BFT was the most important variable for the equation of %RC and %FAT. The precision and accuracy of three variable equation consisting CWT, BFT, and EMA were very similar to those of four variable equation that included all for independent variables (CWT, BFT, EMA, and MAR) in RC and FAT, while the three variable equations provided a more accurate prediction for %RC. Consequently, the three-variable equation might be more appropriate for practical use than the four-variable equation based on its easy and cost-effective measurement. However, a relatively high average difference for the ELP in absolute value implies a revision of the official equation may be required, although the current official equation for predicting RC with three variables is still valid.

• Korean Journal of Construction Engineering and Management
• /
• v.21 no.1
• /
• pp.78-86
• /
• 2020

Dozer is an expensive construction equipment and has a significant performance impact on earthwork performance. A machine guidance system has been applied to dozer equipment as a solution that can improve the performance. The system can provide earthwork-related information to equipment operators so that earthworks can be carried out with minimum support from surveyors. Construction Equipment Machine guidance has the function of supporting earthwork according to an earthwork plan by providing excavation-related information to machine operators. The objective of this study is to evaluate the performance improvement of a machine guidance system for an dozer earthwork operation, and to compare the machine guidance method with the traditional method. The performance has been evaluated in two folds: 1) productivity and 2) accuracy. The productivity shows the quantity of earthwork for a given unit time. The accuracy shows the deviation of grading level from the designed level on the construction drawing for earthwork. The machine guidance system has been applied to a testing bed in a construction site. Data comparison analysis showed that the earth earthwork had 46.59% improvement in productivity as well as 46.96% improvement in accuracy, and is expected to provide a tool for applying smart constrction to the earthwork operation.

• Journal of Animal Science and Technology
• /
• v.49 no.6
• /
• pp.689-698
• /
• 2007

This study aims to estimate the genetic parameters for carcass traits on Hanwoo of breeding farmhouses using Animal Products Grading Service’s data of 428,812 cattle from 101 slaughterhouses nationwide from 2000 to 2005. Using carcass traits of carcass weight, eye muscle area, backfat thickness, marbling score, meat color and fat color that greatly influence Hanwoo's grade, the effects of carcass year, carcass season, sex and carcass region were estimated. Based upon carcass traits of carcass weight, eye muscle area, backfat thickness, marbling score and meat color that greatly influence Hanwoo’s grade, the heritabilities and genetic parameters were estimated of 17,578 Hanwoo slaughtered in 2005 with existing herdbook, where EM-REML algorithm was used in estimating genetic parameters. The mean and standard deviation of each carcass trait are 321.42±53.62kg, 76.25±10.43cm2, 9.96± 4.14mm, 3.75±2.00, 4.83±0.48 and 2.99±0.40, for carcass weight, eye muscle area, backfat thickness, marbling score, meat color and fat color, respectively. As a result of analysis on the effects of carcass year, the carcass weight, backfat thickness and meat color came out highest as 359.40±0.181, 9.82±0.017 and 4.90±0.002, respectively in 2004. As a result of analysis on the effects of carcass season, the carcass weight and eye muscle area came out highest as 345.88±0.144 and 79.57±0.033 respectively in spring, and the backfat thickness was highest as 8.78±0.013 in winter, and the meat color and fat color slightly came out higher as 4.88±0.002 and 2.96±0.001 in fall, while the marbling score was highest as 3.29±0.006 in summer. The results of the analysis on the effects of sex indicated that the backfat thickness and fat color were highest as 10.53±0.010 and 3.07±0.001 in cow, the carcass weight came out highest in Hanwoo steer as 368.03±0.068kg, the eye muscle area were highest as 82.96±0.042 in bull, and the marbling score was highest as 4.19±0.007 in steer, and the meat color was highest as 4.89±0.001 in cow. Regarding the results of analysis on the effects of carcass region, the carcass weight, eye muscle area,

• The Korean Journal of Applied Statistics
• /
• v.30 no.3
• /
• pp.391-401
• /
• 2017

This study develops an indicator to manage regional variations of approval rates for long-term care (LTC) service. We used LTC insurance data for grade assessment that include 433,155 applicants from 227 LTC centers across Korea in 2015. The approval rate for each center was defined as the proportion of the numbers of approved applicants out of all applicants. We assumed that the approval rates depended on the characteristics of applicants. We estimated the 'standard' approval rates from a multiple linear regression analysis using the characteristics of applicants as independent variables. The difference between the observed and the standard rates was then defined as an indicator for deviation. A center having a large difference could be considered as a center with a potential error in grade assessment. We also examined if the characteristics of investigators affected the approval rates. We found that the socio-demographic characteristics of applicants and reapplication rate for LTC grade were independent factors affecting the approval rates. Centers having the management indicator values falling outside the middle 95% of the distribution were identified as centers with an error in grading. We expect that this study will contribute to enhancing reliability and equity in LTC grading.

• Journal of Fashion Business
• /
• v.20 no.5
• /
• pp.60-75
• /
• 2016

This research was conducted to understand the different circumstances for wearing shirts by adult males aged 20-39, and to provide this basic information to the shirt industry prior to developing new functional men's shirts. A total of 345 respondents participated in the survey. Most of questionnaire, frequency, mean and standard deviation were calculated and the differences between the 20s and 30s were analyzed by t-test or ${\chi}^2$ test. The results of the survey are as follows. Grading the satisfaction degree of their body parts, the respondents were relatively unsatisfied with their height, weight, and waist, abdominal and hip circumferences. Majority preferred department stores, discount stores and outlets for purchasing shirts. Many have never owned tailored shirts - men in 20's had less experience with tailoring than men in 30's. The foremost selection criterion for purchasing shirts was fit -during purchase, men in their 20's considered fit more important than men in their 30's. The most preferred unbuttoning of the top button when wearing shirts. For favored collar shapes with one button unbuttoned, the most valued collar angle and style was V-neck shape when unbuttoned, low collar band, collar with unopened collar, and stiff collars. Most shirt designs and details included slim fit, no dart in the front and one dart on the back. Men in 20's more preferred the no dart in the front and one tuck on the back, as compared to men in 30's. On the other hand, men in their 30's preferred one dart shirts than men in 20's. Regarding shirt bands and cuffs, one button and regular collar and one button cuffs with round angle design, were the most preferred, respectively.

• Journal of the Korean Home Economics Association
• /
• v.12 no.2
• /
• pp.621-631
• /
• 1974

The objective of the study was to obtain standard sizes of body of the high school girls for designing clothes and developing pattern grading of clothes. In 1972, 342 students, selected by the stratified cluster random sampling method, at three high schools in Seoul were measured on forty-one items by the R. Martin method. Statistical techniques of mean, standard deviation, coefficient variable, maximum and minimum, range, t-test were utilized to analyze the data. The findings of the study were as follows ; 1. No differences were found among the age groups in the all measured variables. 2. Stature, bust girth, hip girth, acromion width, posterior waist girth/stature ratio of the high school girls were significantly smaller than those sizes of adult women. This result implies that those sizes will be increased as the students grow up. But upper arm girth, upper arm girth/bust girth ratio, and thigh girth/bust girth ratio were bigger than those sizes of adult women. Waist girth, thigh girth, total head height/stature ratio, acromion width/stature ratio, and foot length/stature ratio were nearly similiar to those of adult women. 3. According to the result of t-test, waist breadth, spinailiaca anterior height/stature ratio, thigh girth/bust girth ratio, and thigh/hip girth ratio of the 15 year old group were significantly different from those of the 16 year old group at the level of 0.05. Bust girth, weight, foot breadth, posterior croth length, and cervical height/stature ratio of the 16 year old group were significantly different from those of the 17 year old group at the level of 0.01. Hip girth, upper arm girth, waist breadth/stature ratio, and neck base girth/bust girth ratio of the 16 year old group were significantly different from those of the 17 year old group at the level of 0.05.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.24 no.5
• /
• pp.470-482
• /
• 2021

Purpose: We investigated the relationship between sonographic measurements of fatty liver and body mass index standard deviation score (BMI-Z score), abdominal wall fat thickness (AWFT), and serum biochemical parameters in childhood obesity. Methods: Anthropometric, laboratory, and ultrasonography data were obtained from 174 children with BMI-Z score >1. After the qualitative grading of hepatosteatosis (grades 0-3), the quantitative liver-kidney echogenicity ratio (LKER) was calculated using a software tool. Groups according to sex, age (AG-I to AG-III), BMI-Z score (BMG-I to BMG-III), and hepatosteatosis degree (HS-I and HS-II) were formed. The differences and distributions of the variables were statistically analyzed and compared among the groups. Results: Serum transaminase and glucose levels showed a positive correlation with LKER, whereas the HDL level showed a negative correlation. BMI-Z score and AWFT showed a positive correlation with fasting insulin level and HOMA-IR value. LKER was significantly higher in girls than in boys (p=0.008). In the AG-I group (age 3-8.9 years), the BMI-Z score was significantly higher, whereas AWFT was significantly lower than in the other age groups (p<0.001). The cutoff point of LKER for predicting grade 2 or higher steatosis (HS-II group) was determined to be 1.83. Cardiovascular disease risk was significantly higher in the HS-II group (p=0.035). Conclusion: As a valuable quantitative measurement tool, LKER can be used for the sonographic screening of fatty liver. AWFT, on the basis of its correlation with fasting insulin level and HOMA-IR value, may be a useful sonographic parameter in the management of childhood obesity.

• Investigative Magnetic Resonance Imaging
• /
• v.25 no.2
• /
• pp.109-117
• /
• 2021

Purpose: To investigate the reliability of CT and MRI for quantitative and qualitative analyses of lumbar paraspinal muscle fatty infiltration (PSFI) and correlation of PSFI with intervertebral disc pathology. Materials and Methods: Lumbar spine CT and MRI of 36 subjects were reviewed retrospectively. Two observers independently outlined lumbar paraspinal muscles at each mid-intervertebral disc level. Paraspinal muscles on CT and MRI were graded according to the Goutallier grading system (GGS). The area, mean value, and standard deviation (SD) of the Hounsfield unit (HU) were obtained. Intervertebral discs were assessed on axial image of T2WI at each level. Correlations between qualitative and quantitative data and intervertebral disc pathology, age, and sex were evaluated. Results: Inter- and intra-observer agreements for results of GGS on MRI were substantial (κ = 0.79) and moderate (κ = 0.59), respectively. Inter- and intra-observer agreements for results of GGS on CT were almost perfect (κ = 0.88) and substantial (κ = 0.66), respectively. Quantitative measurements of HU showed almost perfect inter- and intra-observer reliabilities (κ = 0.82 and κ = 0.99, respectively). There were statistically significant correlations between intervertebral disc pathology and PSFI at L1-2, L2-3, and L4-5 levels on MRI and at L1-2 and L3-4 levels on CT. Age showed significant correlation with results of GGS at all levels on CT and MRI. Conclusion: This study showed that GGS results and HU measurements could be useful for evaluating PSFI because they showed correlations with intervertebral disc pathology results at certain levels.