• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.5
• /
• pp.1150-1157
• /
• 1988

Two-dimensional turbulent plane jet which is under the pressure gradient in the transverse direction is studied numerically. Full Navier-Stokes equations are used to correctly account for the pressure variation in the transverse direction. Using the standard k-.epsilon. turbulence model as a closure relationship, a time marching procedure gives the velocity field. The temperature fields are obtained for two different cases : (1) Hot jet is issued into the cold still air, and (2) Hot jet is issued into the surrounding across which exists a temperature difference. The velocity and temperature fields along with other flow and heat-transfer characteristics for two different pressure gradients are presented. A simple formula that relates the jet trajectory to the pressure gradient is also proposed. The mass flux in the longitudinal direction and the jet halfwidth seem insensitive to the pressure gradient. However, the pressure gradient increases the heat flux in the longitudinal direction as well as in the transverse direction.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.12
• /
• pp.983-990
• /
• 2014

This research focused on designing an appropriate thermocouple sensor for a thermal boundary layer with a large temperature gradient. It was designed to minimize the conduction error from a constant temperature wall in a boundary layer. A $79.9-{\mu}m$ thermocouple was chosen, and a five-axis device jig was developed to fabricate a butt-welded thermocouple, which is different from arc-welded junction thermocouples. This was used to minimize the size of the thermocouple junction. In addition to fabricating butt-welded thermocouples, a thorough calibration was conducted to decrease the internal error of a multimeter to ensure that the data from the butt-welded and regular thermocouples were almost the same. Based on this method, a butt-welded thermocouple with a small junction was found to be suitable for measuring the temperature in a thermal boundary layer with very large thermal gradients. Using this thermal boundary layer probe, the thermal boundary layers in a turbine cascade were measured, and the Nusselt numbers were obtained for the turbine endwall.

• 한국해양학회지
• /
• v.1
• /
• pp.25-36
• /
• 1971

The structure of the south Korean coastal front, their fluctuation, the properties and the probable effects of the front on the mackerel fishery are discussed based on the data of 26 cruises in 1967-1969 in the southern waters of Korea. In the south Korean coastal water the annual variations of the properties shows the greatest magnitude among the other water masses in the north of East China Sea. The salinity profile provides a fairly accurate description of the interface between the two kinds of water and agree with the temperature structure in winter. The temperature front does not always coincide with the salinity front in summer, while the former corresponds to the later in winter. The sharpest and most stable front between the Tsushima Warm Current and the south Koren coastal water was found in autumn and winter. In autumn 1969, the most successful catches of mackerel was recorded in the south Korean front of great borizontal gradients of properties(temperature 5.0$^{\circ}C$/10miles, salinity 1.2 /10miles) in the east of Cheju Is. If future investigation finds the peculiar oceanographical conditions like that shown in summer, 1969, the conditions of frontal layer in coming autumn will be estimated and finally the success of the mackerel fishery will be predictable from preseason information on temperature and salinity structure in the southern waters of Korea.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.11
• /
• pp.4121-4128
• /
• 2010

A probe card is used in testing semiconductor wafers. It must maintain a precise location tolerance for a fine pitch due to highly densified chips. However, high heat transferred from its lower chuck causes thermal deformations of the probe card. Vertical deformation due to the heat will bring contact problems to the pins in the probe card, while horizontal deformation will cause positional inaccuracies. Therefore, probe cards must be designed with proper materials and structures so that the thermal deformations are within allowable tolerances. In this paper, heat transfer analyses under realistic loading conditions are simulated using ANSYS$^{TM}$ finite element analysis program. Thermal deformations are calculated based on steady-state temperature gradients, and an optimal structure of the probe card is proposed by adjusting a set of relevant design parameters so that the deformations are minimized.

• Journal of Korea Multimedia Society
• /
• v.14 no.4
• /
• pp.538-545
• /
• 2011

Today, there is a wide variety of digital contents on the Internet. Especially, comic images are one of popular digital contents. Most of them are scanned from comic books by digital scanners, but they were not normalized in sense of their size, skew and boundary margin. The normalization is very important step in comic image analysis. It can be achieved by finding out-boundary rectangles in comic images. In this paper, we propose a method for detecting the out-boundary rectangle using the gradient Radon transform in comic images. We applied the Radon transform using image gradients to extract line segments which are the out-boundary rectangle sides' candidates in comic images. The final out-boundary rectangle can be detected by local histogram and the candidate line segments. Experimental results show that our proposed method effectively detect the out-boundary rectangle in comic images.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.2 no.1
• /
• pp.11-21
• /
• 1998

During an earthquake, there are three main components of excitation : horizontal excitation of the ground, vertical excitation of the pile due to superstructure feedback produced by vertical excitation of the ground, and the seawater excitation induced by the vertical ground shaking, that is, "the seaquake." These excitations could have effects on the soil plugs in open-ended pie piles installed at offshore sites. In this study, seaquake excitation induced by the vertical ground shaking was simulated by pulsing the water pressure at the seabed. During a seaquake, due to the induced excess porewater pressure and pressure gradients in the soil, the capacity of open-ended pipe piles installed in a simulated sea depth of greate than 220 m was reduced serevely and the soil plugging resistance was degraded by more than 80% The soil plug was failed because of eh upward seepage forces that developed in the soil plug due to excess pore water pressure produced in the bottom of the soil plug during the seaquake, The compressive capacity of ar open-ended pile in a simulated sea depth of less than 220 m was reduced only by about 10% and the soil plug resistance was degraded by less than 5%.s than 5%.

• The KIPS Transactions:PartB
• /
• v.13B no.5 s.108
• /
• pp.525-532
• /
• 2006

This paper proposes a new class of image restoration on the Ising modeled binary 'Takbon' image by the flexible line-fitting ICM(Iterated conditional modes) method. Basically 'Takbon' image need be divided into two extreme regions, information and background one due to its stroke combinations. The main idea is the line process, comparing with the conventional ICM approaches which were based on partially rectangular structured point process. For calculating geometrical mechanism, we have defined line-fitting functions at each current pixel array which form the set of linear lines with gradients and lengths. By applying the Bayes' decision to this set, the region of the current pixel is decided as one of the binary levels. In this case, their statistical reiteration for distinct tracking between intra and extra region offers a criterion to decide the attachment at each step. Finally simulations using the binary 'Takbon' image are provided to demonstrate the effectiveness of our new algorithm

• Journal of agriculture & life science
• /
• v.44 no.5
• /
• pp.35-43
• /
• 2010

To examine the relationship between climate and tree-ring growth of Pinus densiflora S. et Z. growing in the ridges of the Baekdudaegan, it was analyzed the sample cores of 48 trees were collected from 21 sites. After the pattern of tree rings of all Pinus densiflora were cross-dating each other, it was recognized the growth of Pinus densiflora was affected by climate largely when tree-ring chronologies were standardized to remove the age-related growth. As a cluster analysis was conducted to examine the similarity of chronologies, three clusters were classified, the tree-ring growths of Pinus densiflora was not by regional or elevational gradients but by the growth tree-ring width amplitude as micro-site growth environments. Correlation coefficients between the chronologies of three clusters and monthly climate (temperature and precipitation) factors were obtained. As a result, tree-ring growth of Pinus densiflora was more affected by temperature than precipitation and the trees of high-growth cluster possessed less climatic influences.

• Journal of The Geomorphological Association of Korea
• /
• v.21 no.4
• /
• pp.85-96
• /
• 2014

A waterfall is a channel unit with steep bedrock. No strict criteria for height, water volume, gradient to define waterfalls exist in Korea. The goal of our study is to classify waterfalls based on morphological forms which are the outcomes of developmental processes. The genesis of waterfall depends upon erosional properties of waterfall. The height, gradient, bedrock strength and stream power of waterfalls are regarded as the main factors, by which waterfalls can be classified. We find out that the most important factor for the development of waterfalls is joint system. Development of joint system varies depending on bedrocks. Flow directions and erosional types are decided by the density and direction of joint system in the bedrock, which also decide the height and gradient of stream bed. Joint type decides the gradients of the bed, gradient and height of waterfalls, therefore, decides morphological forms.

• Steel and Composite Structures
• /
• v.19 no.2
• /
• pp.369-384
• /
• 2015

This work presents a free vibration analysis of functionally graded metal-ceramic (FG) beams with considering porosities that may possibly occur inside the functionally graded materials (FGMs) during their fabrication. For this purpose, a simple displacement field based on higher order shear deformation theory is implemented. The proposed theory is based on the assumption that the transverse displacements consist of bending and shear components in which the bending components do not contribute toward shear forces and, likewise, the shear components do not contribute toward bending moments. The most interesting feature of this theory is that it accounts for a quadratic variation of the transverse shear strains across the thickness, and satisfies the zero traction boundary conditions on the top and bottom surfaces of the beam without using shear correction factors. In addition, it has strong similarities with Euler-Bernoulli beam theory in some aspects such as equations of motion, boundary conditions, and stress resultant expressions. The rule of mixture is modified to describe and approximate material properties of the FG beams with porosity phases. By employing the Hamilton's principle, governing equations of motion for coupled axial-shear-flexural response are determined. The validity of the present theory is investigated by comparing some of the present results with those of the first-order and the other higher-order theories reported in the literature. Illustrative examples are given also to show the effects of varying gradients, porosity volume fraction, aspect ratios, and thickness to length ratios on the free vibration of the FG beams.