• Journal of Chest Surgery
• /
• v.20 no.1
• /
• pp.1-12
• /
• 1987

Respiratory care with oxygen inhalation is often a necessity to maintain life, and it is one of the important therapeutic adjuncts in respiratory disease and in intensive care after surgery. However, it has been reported that oxygen toxicity occurs after prolonged exposure to 100% 0, [Smith, 1899; Kistler et al. 1967; Schaffner et al. 1967; Rowland and Newman, 1969. Subjective symptoms of oxygen toxicity include tracheal irritation, frequent cough, some burning sensation in the trachea, tachypnea, severe dyspnea, etc. [Welch, 1963; Fisher et al, 1968; Milier et al, 1970; Clark and Lambertsen, 1971; Sackner, 1975]. Pathologic findings are atelectasis, injuries to the pulmonary capillaries and hemorrhage in the alveoli in gross specimens. There can be inflammation, proliferation of fibrin, thickening of alveolar membranes, degeneration of collagen fibers and interstitial edema in the microscopic findings. [Penrod, 1956; Cedergren, 1959; Bean, 1965; Schaffner, 1967]. Dubois and colleagues [1961] found that the amount of pulmonary surfactant was decreased in oxygen toxicity and atelectasis followed by the decreased pulmonary surfactant. Many authors reported that vital capacity, inspiratory force, pulmonary compliance, pulmonary capillary blood flow and pulmonary elasticity were deceased and arteriovenous shunting increased. [Comroe et al, 1945; Fuson et al, 1965; Kistler et al, 1966; Knowles and Blenner-hassett, 1967; Barber et al, 1978]. Many human volunteers were examined after prolonged exposure in a high oxygenated chamber and there were a few reports on animals with oxygen toxicity, subjects including rabbits. Gas partial pressures of alveoli and arteries were measured in rabbits exposed to 100% $O_2$ and the alveolar-arterial gas gradients were analyzed, which is the basis for the study of oxygen toxicity. These rabbits were divided into two groups; rabbits under natural respiration, and second group under artificial respiration with a respirator. The alveolar $PO_2$ [$P]AO_2$] and $PCO_2$ [$PACO_2$], and the arterial $PO_2$ [$PaO_2$] were measured under varying $O_2$ pressures; 15% $O_2$, 21% $O_2$ and 100% $O_2$.

• Korean Journal of Pharmacognosy
• /
• v.29 no.4
• /
• pp.293-299
• /
• 1998

The effects of Buthus martensi Karsch (BMK) on natural killer (NK) cell activity in mouse spleen were studied. Water extracted solution of BMK was orally administrated to Balb/c mice for 2 weeks. Among splenic cells, T cell fractions were separated by Nylon wool column. Furthermore, NK cell purification was performed 4.5% percoll gradients methods. The cytotoxcity of NK cell to K562 cell was determined by lactic acid dehydrogenase and $[^3H]-thymidine $ incorporation methods. And the cytotoxicity of effector cell was most effectively induced in a ration of 50:1 (effector/target cell). As a result, cytotoxicity of NK cells was significantly increased compared with control group both in vivo and in vitro systems. The similar cytotoxic effect was shown in $[^3H]-thymidine $ incorporation methods. This suggests that when BMK is administrated to mice with malignant tumors, an increase in NK cell activity may occur and affect K562 tumor cells.

• Journal of Ecology and Environment
• /
• v.44 no.3
• /
• pp.162-177
• /
• 2020

Background: Ecologists have achieved much progress in the study of mechanisms that maintain species coexistence and diversity. In this paper, we reviewed a wide range of past research related to these topics, focusing on five theoretical bodies: (1) coexistence by niche differentiation, (2) coexistence without niche differentiation, (3) coexistence along environmental stress gradients, (4) coexistence under non-equilibrium versus equilibrium conditions, and (5) modern perspectives. Results: From the review, we identified that there are few models that can be generally and confidently applicable to different ecological systems. This problem arises mainly because most theories have not been substantiated by enough empirical research based on field data to test various coexistence hypotheses at different spatial scales. We also found that little is still known about the mechanisms of species coexistence under harsh environmental conditions. This is because most previous models treat disturbance as a key factor shaping community structure, but they do not explicitly deal with stressful systems with non-lethal conditions. We evaluated the mainstream ideas of niche differentiation and stochasticity for the coexistence of plant species across salt marsh creeks in southwestern Denmark. The results showed that diversity indices, such as Shannon-Wiener diversity, richness, and evenness, decreased with increasing surface elevation and increased with increasing niche overlap and niche breadth. The two niche parameters linearly decreased with increasing elevation. These findings imply a substantial influence of an equalizing mechanism that reduces differences in relative fitness among species in the highly stressful environments of the marsh. We propose that species evenness increases under very harsh conditions if the associated stress is not lethal. Finally, we present a conceptual model of patterns related to the level of environmental stress and niche characteristics along a microhabitat gradient (i.e., surface elevation). Conclusions: The ecology of stressful systems with non-lethal conditions will be increasingly important as ongoing global-scale climate change extends the period of chronic stresses that are not necessarily fatal to inhabiting plants. We recommend that more ecologists continue this line of research.

• Journal of the Korean Institute of Gas
• /
• v.5 no.1
• /
• pp.7-14
• /
• 2001

In this work, the chemical composition of the exhaust gas from domestic gas boiler has been analysed in the point of thermodynamics and CO sensor has been characterized. We proposed that the combustion condition can be estimated by the exhaust gas composition, i.e., the excess air ratio and combustion temperature can be calculated simply by the measurement of the $O_{2}$ fraction and $H_{2}/CO$ in the exhaust gas. By analyse the on site situation domestic boiler, the excess air ratio is about $55\~110\%$. Therefore, the CO may be produced in domestic gas boiler by luminous(yellow) flames rapidly lose heat by radiation, turbulent flames may be partially quenched by the action of steep velocity gradients, and flames burning very close to a cold wall may be partial1y quenched by heat conductivity to the wall. The output voltage of CO sensor is lineally depend on the CO and $H_{2}$concentration. And the exhaust CO from boiler can be reduced by closed loop control with CO sensor

• Journal of Korean Medical classics
• /
• v.12 no.2
• /
• pp.166-174
• /
• 1999

Meridians are often defined as passway of Ki and Blood or something that can control funtions of the body. It is true but I think meridians have something more than that. Meridians are not just passway of Ki and Blood, rather they receive Ki from outside and transform it into Essence-Ki(精氣). If we draw a line in a body, we have Chang-Pu inside and meridians outside. Chang-Pu whim is inside our body hold Essence-Ki and manipulate it. These Chang-Pu also have variation of Ki accumulation-Tai-Yang, Soyang, T'ae$\breve{u}$m, Soum. Nevertheless, their gradients are not great so Ki flow among them are not great either. If there are much Ki flow in our body there will be much Ki consumption resulting in exhaustion of Essence-Ki, which is very hard to acquire. Therefore Chang-Pu keeps less gradient by not moving Ki a lot to preserve Essence-Ki. Chang-Pu, inside, are suitable for storing Ki while meridians, outside, are for producing Ki. Meridinas have great difference in Ki accumulation so there are great flow of Ki. This nature is suitable for producing Ki. For example, roots and limbs of a tree don't have much gradient in Ki. They are concentrated and their shape are not very distinct. On the other hand, leaves are wide and it's easy to tell front from back. It means their Ki gradient is great and their Ki flow is also great. Therefore they suitable for producing Ki. Just like this, meridians in our body are suitable for producing Ki. Areas that meridians cover are much wider than that of Chang-Pu. Four limbs and surface of our body are very distinctive. Ulnar side is high in Ki accumulation but is small in volume so it's better to store Ki there. Radial side is low in Ki accumulation but big in volume so it's better to receive and consume Ki there. Meridians are deeply involved in producing and storing Ki.

• Tunnel and Underground Space
• /
• v.26 no.4
• /
• pp.266-273
• /
• 2016

We have numerically modeled thermal evolution of Ulleung Island after an emplacement of magma chamber. The disk-shape magma chamber is assumed to locate at 2.9 km beneath the island and has a diameter and a thickness of 10 km and 300 (or 600) m, respectively. The geothermal gradients evaluated from the numerical modeling coincide well with the range of the geotherms (${\sim}95^{\circ}C/km$) observed from the well logging. Although there are limitations in the application of the numerical results directly to the interpretation of the observed geotherms, we believe that an existence of a hot magma chamber in molten or in solidified state is the most plausible explanation for the observed geotherms.

• Journal of Broadcast Engineering
• /
• v.17 no.2
• /
• pp.316-324
• /
• 2012

In this paper, a novel descreening method using HOG(histogram of gradient)-based adaptive smoothing filter is proposed. Conventional edge-oriented smoothing methods does not provide enough smoothing to the halftone image due to the edge-like characteristic of the halftone noise. Moreover, clustered-dot halftoning method, which is commonly used in printing tends to create Moire pattern because of the intereference in color channels. Therefore, the proposed method uses HOG to distinguish edges and the amount of smoothing to be performed on the halftone image is then calculated according to the magnitude of the HOG in the edge and edge normal orientation. The proposed method was tested on various scanned halftone materials, and the results show that it effectively removes halftone noises as well as Moire pattern while preserving image details.

• 한국해양학회지
• /
• v.7 no.2
• /
• pp.59-73
• /
• 1972

The heavy minerals of a barred estuarine and lagoonal sediments along the North Carolina coast have been studied with more than one hundred samples. Currents, salinity, and pH exhibit well-developed gradients from the upstream parts of the estuaries on the west toward the open ocean on the east. Twenty- four heavy minerals were identified in sediments of the study area. However, less than half of these occur frequently and the remainder exist only in minor quantities or trace amounts. Heavy minerals usually comprise less than 1% of the sample but vary from sample to sample. The maximum amount of heavy minerals in sediments of sounds and estuaries is 2.4% and in sediments of Outer Banks is 16.7%. Opaque minerals range from 10 to 85% of the total heavy mineral assemblage. Garnet and sillimanite are relatively more abundant in the eastern part than the western part in the area. Garnet more abundant in the northern part than the southern part, whereas sillimanite is more abundant in the southern part than the northern part, because the garnet source is in the northern part and one of the sillimanite source is in the southern part in the study area. The results of heavy mineral study indicate that the source of sediments is the Blue Ridge and Piedmont crystalline complex, and Coastal Plain formations. Some portions of sediments are transported from the Atlantic Ocean by the landward currents. They further indicate that the sediments of the Atlantic coast in the study area are transported mainly from the northern part to southern part by longshore littoral currents, and some portions of sediments are transported from the southern part to the northern part by the Gulf Stream.

• Tribology and Lubricants
• /
• v.18 no.3
• /
• pp.194-203
• /
• 2002

This paper is the first step fur thermo-mechanical stress analyses of part with coated layer under contact load. A lot of coated material is applied in many structures to endure severe situation, like thermal stresses, high temperature gradients, irradiation, impacts by microscopic meteorites, and so on. In this part we are going to apply the FEM to analyze space parts with a coated layer subjected to a contact load thermo-mechanically. Coating layer is very thin in comparision with the structure, therefore it should take more times and behaviors to analyze whole model. In these reason we develop the FEM method of analyzing part with coated layer under contact load using partial model. Steady state temperature distribution of the part is obtained first, and then we apply quasi-static external load on the part. To obtain the final stage of solution, we compute the total solution, and by subtracting the thermal strain from the total ones we get the mechanical strains to compute stresses of the parts. In using the FEM, one has to discretize the model into many sub-domain, finite elements. The method is consisited of two steps. First step is to analyze the whole model with rather coarse meshes. Second step we cut a small region near the loading point, and analyze with very fine meshes. This method is allowable by the Saint-Venant's principle. And then, we finally shall check the therma1 load on the stresses of the space part with coating layer with or without substrate cracks. Then, we predict the actual behaviors of the part used in space.

• Journal of the Korean Society of Visualization
• /
• v.14 no.1
• /
• pp.57-61
• /
• 2016

We report a finding of fast(exceeding 2,000 K/s) heating of polydimethylsiloxane(PDMS), one of the most commonly-used microchannel materials, under cyclic loadings at high(~MHz) frequencies. A microheater was created based on the finding. The heating mechanism utilized vibration damping of sound waves, which were generated and precisely manipulated using a conventional surface acoustic wave(SAW) microfluidic system, in PDMS. The penetration depths were measured to range from $210{\mu}m$ to $1290{\mu}m$, enough to cover most microchannel heights in microfluidic systems. The energy conversion efficiency was SAW frequency-dependent and measured to be the highest at around 30 MHz. Independent actuation of each interdigital transducer(IDT) enabled independent manipulation of SAWs, permitting spatiotemporal control of temperature on the microchip. All the advantages of this microheater facilitated a two-step continuous flow polymerase chain reaction(CFPCR) to achieve the billion-fold amplification of a 134 bp DNA amplicon in less than 3 min. In addition, a technique was developed for establishing dynamic free-form temperature gradients(TGs) in PDMS as well as in gases in contact with the PDMS.