• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.3
• /
• pp.62-74
• /
• 2020

Although the government and local governments devote efforts to activate bicycles, they only access to the supply infrastructure such as bike lanes and the public bicycle rental service centers without considering the measures to overcome the geographical constraints of slope. Therefore, this study constructs bicyclist's energy consumption estimation model through experimental methods of slope gradient and heart rate measurement and suggest the bicycle route choice model which could minimize the energy by the slope gradient. After calculating the RMSE of the estimated energy consumption by applying this model to the simulation section, it is confirmed to be 41% better than the model which does not reflect slope gradient. The results of this study are expected to be applied to the bicycle infrastructure planning that considers both longitude and transverse of bike lanes and the algorithm of bicycle route guidance system in the future.

• Korean Journal Plant Pathology
• /
• v.3 no.2
• /
• pp.131-136
• /
• 1987

Rates of lesion development over time and disease gradients over distance for blast disease on the two rice varieties, Brazos and M-20 1 were significantly affected by two different cultural conditions, upland and flooded conditions. Flooding rice field plots lowered the rates of lesion increase and flattened the disease gradients for both varieties. Despite absence of statistically significant differences in the rate of lesion increase between four sampled distances from infection focus, rate of lesion development tended to be slightly greater as distance from the infection focus increases. Rate of lesion increase was greater with more susceptible variety M-201 than with Brazos. Disease gradient was steeper for M-201 than for Brazos. As blast disease progressed, disease gradients became flattened regardless of variety due to the infections originated from secondary foci. Between two empirical disease gradient models examined, Kiyosawa & Shiyomi model was fitted better over Gregory model. Rates of blast isopath movement under upland conditions were calculated as approximately 0.2m/day and 0.4 m/day for Brazos and M-201, respectively. The results in this study suggest that differences in varietal resistance to blast could be detected by measuring disease gradient as efficiently as by measuring infection rate.

• Journal of Korean Society of Steel Construction
• /
• v.18 no.2
• /
• pp.191-201
• /
• 2006

New design equations for calculating the lateral-torsional buck ling moment resistances of stepped I-section beams with/without continuous lateral top-flange bracing subjected to a point load, a series of point loads, and a uniformly distributed load, are suggested based on the results of elastic finite-element analyses. The new equations presented in this study are compared with the current moment gradient modifiers presented by other researchers and specifications. Although the study paper presents mainly stepped-beam cases subjected to a point load and a uniformly distributed load. The proposed equations include the length-to-height ratio effects for stepped beams with continuous lateral top-flange bracing. The new moment gradient correction factors could be easily used to calculate the lateral-torsional buckling moment resistance of stepped I-beams.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.3A
• /
• pp.149-160
• /
• 2012

Corrugated steel plates have several advantages such as high resistance for shear without stiffeners, minimization of welding process, and high fatigue resistance. To take advantage of these benefits, several researchers have attempted to use corrugated steel plate as a web of I-girders. The lateral-torsional buckling is the major design aspect of such I-girders. However, lateral-torsional buckling of the I-girder with corrugated steel webs still needs to be investigated especially for a real loading condition such as non-uniform bending. This paper investigated the lateral-torsional buckling strength of the I-girder with corrugated steel webs under linear moment gradient by using finite element analysis. From the results, it was found that the buckling behavior of the I-girder with corrugated steel webs differed depending on the number of periods of the corrugation. Also, a simple equation for the moment gradient correction factor of the I-girder with corrugated steel webs was suggested. The inelastic lateral-torsional buckling strength of the I-girder with corrugated steel webs was then discussed based on current design equations for ordinary I-girders and the results of finite element analysis.

• The Journal of the Korean Society for Microbiology
• /
• v.21 no.1
• /
• pp.33-45
• /
• 1986

On hundred and forty stains of shigella cultures isolated from the twelve hygiene laboratories of cities and provincial general hospital laboratories in 1983 were tested for their resistance to thirteen antimicrobial drugs and their R-plasmid transfer. Antimicrobial drugs were used amikacin, ampicillin, cephalothin, chloramphenicol, gentamicin, kanamycin, nalidixic acid, rifampicin, streptamycin, tetracycline, tobramycin, cefoperazone and piperacillin. All strains were resistant to one or more of thirteen antimicrobial drugs but 94.3% were susceptible to amikacin, gentamicin and tobramycin of total isolated. The most strains commonly found resistance was to chloramphenicol (94%) followed by streptamycin (93%), tetracyline (92%) piperacillin (90%) ampicillin (83%), cefoperazone (42%), nalidixic acid (14%), cephalothin (17%), rifampicin (22%) and kanamycin (6%), sixty percent of strains among 140 were resistance to ampicillin, chloramphenicol, streptomycin, tetracycline at the same time. The transfer of drug resistance by conjugation was tested and ninety four strains (94.3%) were resistant to one or more drugs were found to transfer their drug resistance of E. coli. percentage of transfer frequency by conjugation was one strains (54%), the transfer frequency of drug resistance varied by donor strains and recipients, but not by selecting drugs. Resistance to nalidixic acid was not transferred by conjugation to recipients. Percentage of plasmid curing after the treatment of acriflavine, acridine orange was about 8%. Among strains cured two strains were tested compare original strains with them in biochemical properties in arginine dihydrolase and arabinose fermentation reaction. It was found to growth curves of No.2 shigella flexneri, serotype 1b, and its derivatives cured with acriflavine in $M{\ddot{u}}ller$ Hinton broth medium (pH 7.4, $38^{\circ}C$) by temperature Gradient Biophoto Recorder TN-1120 (Tokyo, Japan).

• Journal of the Society of Naval Architects of Korea
• /
• v.46 no.1
• /
• pp.10-23
• /
• 2009

Korean small coastal fishing boats have the different kind of fisheries and customs against Japanese fishing boats. Those bring some influences on the principal parameters of hull form. In same displacement, Korean small coastal fishing boat has generally shorter length, draft and wider breadth than Japanese fishing boat. Furthermore, even though the parameters of each hull form are similar, it is known that the resistance performance of Korean small coastal fishing boat is worse than that of Japanese fishing boat. In this study, the representative hull forms of Korean and Japanese small coastal fishing boats are selected and compared to evaluate the resistance performance of Korean fishing boat in low-speed range. The hull form of the Korean fishing boat is modified as comparison with that of the Japanese fishing boat to confirm the partial characteristic differences between the hull forms and the resistance performances. The representative partial characteristics of hull form are the gradient of chine line, keel shape and stern length. The resistance performances of the modified hull forms are evaluated by INHAWAVE which is one of CFD program and model tests in towing tank. The results of the present study will be used to improve the resistance performance and to develop the practical hull form of Korean small coastal fishing boats as principal data in the preliminary hull form design of fishing boats.

• Fire Science and Engineering
• /
• v.2 no.1
• /
• pp.3-10
• /
• 1988

Concrete is incombustible and has good fire resisting properties, i. e. when exposed to fire it continues to perform satisfactorily for a reasonable period of time. Nevertheless, with time and high temperature gradient, brought about the fire, causes cracking and spatting. Further deterioration and loss of strength are caused by gradual dehydration of concrete paste. This paper is aimed to make a proposal for the design and construction of reinforced concrete structures with more sufficent resistance to fire by the theoritical analysis, which is base4 on investigation of general damages by the fire and change of properties on concrete influenced by high temperature.

• Transactions on Electrical and Electronic Materials
• /
• v.17 no.3
• /
• pp.168-171
• /
• 2016

There has been growing interest and rapid development in transparent electrode films, which are flexible and light and used in mobile, simple information, and electronic devices, and based on recent advancements in nano technology, information technology, and display technology. In particular, studies on developing such films with both high conductivity and high transmittance of visible rays are highly in demand for commercialization. In this study, transparent electrode films were developed for IT using micro patterns that show sheet resistance less than 10 Ω/□, adhesive strength more than 98%, and light transmittance more than 90%. The results of applying a surface emission gradient minimization (Honey Comb) technology to the films was the verification of the sheet resistance, adhesive strength, and light transmittance satisfying the target level of this study through Imprinting and Remolding processes.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.12 no.6
• /
• pp.288-291
• /
• 2002

We developed a new RF indirect-heating LPE furnace. The thermal gradient of our newly developed furnace is less than that of direct heating, and is as gentle as that of the resistance-heating LPE furnace. With this new furnace, the heating and/or cooling is faster than that of the resistance-heating furnace. Impurity-doped YIG film was grown from a $PbO-B_{2}O_{3}$, based flux on a (111) GGG substrate. To study the effect of the impurities on the MSSW threshold power and the saturation response time, we used two microstrip lines to excite and propagate the MSSW at 1.9 GHz. The MSSW threshold power and saturation response time was found to be related to the $\Delta$H.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.10
• /
• pp.1903-1914
• /
• 2011

In this paper, we propose vehicle running characteristic simulator. The developed simulator is configured by two induction motors which are directly coupled with each other. One motor is to simulate the vehicle drive and another motor is to simulate the vehicle dynamic load including running resistance, gradient resistance and adhesive characteristics between rail and wheel. The running characteristics of vehicle are modeled by numerical formulas. These are programed by software of embedded controller. Thus, it is possible to change several running characteristics during the running test freely and instantly. To evaluate the feasibility of the simulator, the experiments on slip and adhesion coefficient are performed. Additionally the adhesion control and speed control of vehicle are tested with simulator. Experimental results show that the simulator can produce the driving characteristics similar to the vehicle system.