• Ocean and Polar Research
• /
• v.33 no.3
• /
• pp.193-209
• /
• 2011

The community structure of meiobenthos was studied at 16 stations within sandy tidal and subtidal zones in Jangbongdo in the Yellow Sea, Korea from Aug. 2006 to Jan. 2007. Meiobenthic organisms were collected by three core samples, with a 3.6 cm diameter, from each sediment sample taken with a Smith-McIntyre Grab. Mean grain size of study stations ranged from $1.49{\phi}$ to $3.55{\phi}$. Composition of sand ranged from 80.38% to 99.89%. There was reduction in total abundance and biomass of meiobenthos from summer to winter. Total densities of meiofauna ranged between 17 inds./10 $cm^2$ and 853 inds./10 $cm^2$. Nematodes, gastrotricha, nauplius and harpacticoids appeared as major taxa in decreasing order. This study shows that major taxa comprised 90 percent of total abundance. Most meiofaunal organisms are concentrated in the upper sediment layers and the total abundance and biomass of organisms in the tidal zone is higher than the subtidal zone.

• The Journal of the Korea Contents Association
• /
• v.13 no.6
• /
• pp.1-8
• /
• 2013

It is generally required to use modeling or animation tools for inserting dynamic objects into augmented reality, and this process demands high expertise and complexity. This paper proposes a video object based authoring method that enables augmentation with dynamic video objects without such process. Integrated grab-cut and grow-cut method strips initial area of video target off the existing video clips, and snap-cut method is then applied to track objects' boundaries over frames so as to augment real world with continuous motion frames. Experiment shows video cut-out and authoring results achieved by only a few menu selections and simple correcting sketch.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.7 no.4
• /
• pp.107-113
• /
• 2007

The Kuem-River, one of the largest rivers in Korea, is the primary water source for more than 4 million people in Kongju city and surrounding area. To study the effect of stormwater runoff to CSOs, twelve monitoring sites were selected in two large cities (City of Kongju and City of Buyeo) near the Kuem-River. Monitoring was reformed by collecting grab samples, measuring flow rates during dry and wet seasons during over two rainy seasons. Generally the flow rate of wastewater in combined sewers was rapidly decreased after 23:00 P.M. and gradually increased from 06:30 A.M. in all sites during the dry season. The concentrations of pollutant increase approximately 5 to 7 fold for TSS and 1.5 to 2.5 fold for BOD during the rainy season. Monitoring and statistical analysis show that the groundwater contributes on sewage volume increase (average 25-45% more) during dry periods and the stormwater runoff contributes approximately 51-72% increase during rainy periods. Generally the concentrations of combined sewage were more polluted during the first flush period than after the first flush during a storm event.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.16 no.2
• /
• pp.106-113
• /
• 2008

The goal of crashworthiness is an optimized vehicle structure that can absorb the crash energy by controlled vehicle deformations while maintaining adequate space so that the residual crash energy can be managed by the restraint systems to minimize crash loads transfer to the vehicle occupants. Front side assembly is one of the most important energy absorbing components in relating to the crashworthiness design of vehicle. The structure and shape of the front side assemblies are different depending on auto-makers and size of vehicles. Thus, it is not easy to grab an insight on designer's intention when you glance at a new front side member without experiences. In this paper, we have performed the explicit nonlinear dynamic finite element analysis on the front side assembly of a passenger car to investigate the effect of thickness distribution of the front side assembly on the collapse shape, which is important in the aspect of controlling deformation to maintain adequate space, from the viewpoint of reverse engineering. To do this, we have performed crash FE analysis for the assembly by varying the thickness distribution of the assembly.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.313-316
• /
• 2011

This paper investigates CFD investigation on single phase supersonic nozzle flow and 2-phase subson ic flow prior to rocket nozzle supersonic 2-phase flow with water injection within the flame deflector. Numerical results of supersonic nozzle single phase flow showed no notable unrealistic behavior as it captures the usual shock cell structures. Three-dimensional 2-phase flow analysis has also been performed to verify whether the approach can grab the droplet behavior during cooling by water injection. It is expected these basic studies will enhance the cooling problem analysis of supersonic 2-phase rocket plume in the future.

• Ocean and Polar Research
• /
• v.36 no.4
• /
• pp.515-524
• /
• 2014

The Korea Institute of Ocean Science and Technology has acquired detailed biological, chemicophysical, and geological data in the northeastern Pacific through a manganese nodule program since 1983. Plenty of manganese nodules were collected to estimate the amount of resources by free-fall grab and box corer. The collected manganese nodules have been archived systematically in the rock and mineral storage section of the Library of Marine Samples (LIMS) since 2012. The LIMS provides essencial information on the stored samples including sample name, nodule type, sampling location, depth, and equipment. Although a high quality database of the information system is under construction, the samples have tagged information for manganese nodules like chemical composition, morphology, weight, size, abundance, and photograph. In this study, we attempted to provide information on the well-organized and easily accessible archived manganese nodule samples for future studies and to introduce the usefulness of the LIMS.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.23 no.1
• /
• pp.21-31
• /
• 2016

Purpose: This study is a qualitative research to identify new nurses' adaptation experience to sleep changes. Method: Grounded theory methodology was utilized. Participants were 10 new nurses from one university hospital. The information was collected and analyzed using the grounded theory of Corbin and Strauss'(2008). Results: Through constant comparative analysis, central phenomenon was identified as 'Shaky daily life due to the sleep change'. A core category emerged as 'In the shaky daily life, go grab my position', Causal conditions were 'Heaviness in shift work', 'Not released after getting off work', and 'Body and mind are exhausted'. Context were 'An environment that does not tolerate mistakes' and 'Clogged breathing due to worries'. Intervening factors were 'Support of colleagues', 'Recovery volition in restoration of altered relationships due to sleep'. Action/Interaction Strategies were 'To strive for a good sleep', 'Require a reasonable duty schedule' and 'Find a breakthrough'. Consequences were 'Become the master of shaky daily life' and 'Accepting the life of a nurse'. Conclusion: New nurses experience sleep patterns changes from the hospital shift system. but throughout the process of adaptation, came to accept sleep disorder as part of the life of a nurse.

• Korean Journal of Health Education and Promotion
• /
• v.22 no.4
• /
• pp.203-213
• /
• 2005

Purpose: To assess the environmental hazards of falling accident in the homes of the elderly. Method: 222 homes of the elderly were assessed by the home environmental Checklist from May to July in 2003. Results: The mean score of home environmental hazards for fall were 13.19 with the highest score being 49, ranging from 4 to 24. The bathroom was the most hazardous place in the home, porch came next bedroom, kitchen, living room and stair followed them. The floor surface such as finishes and non-skid mats was the most hazardous interior factor in the home, using bathroom came next furniture and illumination followed them. The floor surface such as finishes and non-skid mats in the bathroom, kitchen, living room and porch, illumination of bedroom and stair were the most prevalent hazards in the home of interior. Of the 49 potential hazards, bathroom grab bar was the most prevalent one with 89.9%, and non-skid rugs in the porch, bathroom and kitchen, safety of dinner table, the threshold and furniture of porch, and illumination of bedroom were prevalent more than half of the home under assessing. Men, living in the separate house or villa with stairs were in more hazardous environments. Conclusion: To reduce the potential hazards of fall accident in the home, improving hazards relating to floor surface such as slip resistance surface and mats is important specially those of the separate house or villa with stairs.

• The Journal of Korean Academic Society of Nursing Education
• /
• v.15 no.1
• /
• pp.81-88
• /
• 2009

Purpose: The purpose of this study was to identify the behavioral responses to a robot pet in pre-school children. Method: This activity for children was conducted for 5 days at a kindergarten and each session lasted 30 minutes. In order to measure children's temperament, Chun Heeyoung's Temperament Rating Scale was used. In addition, to investigate the behavioral responses to a robot pet, each session was videotaped. The videotape data was analyzed according to child-robot interaction. Result: On the average, subjects scored highest in emotionality and lowest in activity for the temperamental subscale. The videotape data revealed verbal, positive nonverbal, and negative nonverbal interaction. Conclusions: These results suggest that child-robot interaction reflects temperamental characteristics, therefore, to develop a nursing intervention program using a robot, it is necessary to consider individual differences and recreational factors to grab children's interest.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2002.09a
• /
• pp.100-102
• /
• 2002

The demand for a better immobilization device has been increased in the radiation oncology field. Especially, it is essential to have a reliable and practical immobilization tool for the whole body radiosurgery and the IMRT (intensity modulated radiation therapy). A useful method to immobilize the abdomen for the external beam radiation treatment is developed. The air-injected balloon blanket (AIBB) was designed as an immobilization device. As the air was injected into it, it pressed down the patient's abdomen and fixed the patient. The AIBB played a role not only to grab the patients' motion, but also to increase the patients' setup reproducibility. Patients' movements due to the respiration were reduced and the reconstruction could be maximized. The experimental results revealed that the AIBB could be used for the clinic.