• 제목/요약/키워드: Gopinath State Observer

검색결과 5건 처리시간 0.022초

적응 퍼지제어기에 의한 IPMSM 드라이브의 쎈서리스 벡터제어 (Sensorless Vector Control of IPMSM Drive with Adalptive Fuzzy Controller)

  • 김중관;박병상;정동화
    • 대한전기학회논문지:전기기기및에너지변환시스템부문B
    • /
    • 제55권2호
    • /
    • pp.98-106
    • /
    • 2006
  • This paper proposes to position and speed control of interior Permanent magnet synchronous motor(IPMSM) drive without mechanical sensor. Also, this paper develops a adaptive fuzzy controller based fuzzy logic control for high performance of PMSM drives. In the proposed system, fuzzy control is used to implement the direct controller as well as the adaptation mechanism. A Gopinath observer is used for the mechanical state estimation of the motor. The observer was developed based on nonlinear model of IPMSM, that employs a d-q rotating reference frame attached to the rotor. A Gopinath observer is implemented to compute the speed and position feedback signal. The validity of the proposed scheme is confirmed by various response characteristics.

적응-퍼지 상태관측기에 의한 IPMSM의 센서리스 제어 (Sensorless Control of IPMSM with Adaptive-Fuzzy State Observer)

  • 정택기;이정철;이홍균;이영실;정동화
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2003년도 추계학술대회 논문집
    • /
    • pp.186-189
    • /
    • 2003
  • This paper is proposed to position and speed control of interior permanent magnet synchronous motor(IPMSM) drive without mechanical sensor. A gopinath observer is used for the mechanical state estimation of the motor. The observer was developed based on nonlinear model of IPMSM, that employs a d-q rotating reference frame attached to the rotor, A gopinath observer is implemented to compute the speed and position feedback signal. The validity of the proposed scheme is confirmed by various response characteristics.

  • PDF

냉간압연 다단 압연기의 롤 슬립 모델링 및 상태 관측기 설계 (Modeling and State Observer Design for Roll Slip in Cold Cluster Mills)

  • 강현석;홍완기;황이철
    • 대한기계학회논문집A
    • /
    • 제36권12호
    • /
    • pp.1543-1549
    • /
    • 2012
  • 이 논문은 냉간 압연공정의 다단 압연기에서 각 롤 간의 슬립 현상에 대한 상태공간 모델을 도출하고, 이를 이용하여 롤 간 슬립 상태 관측기 설계에 관한 연구를 수행한다. 먼저 뉴튼의 운동법칙을 이용하여 각 롤들의 회전 운동 방정식을 1계 비선형 미분 방정식으로 기술한 후, 테일러 급수를 이용하여 임의의 동작점에서 상태공간 방정식으로 선형화한다. 다음에는 선형화된 상태공간 방정식에 기초하여 Gopinath 구성법으로 측정 가능한 구동 롤을 제외한 종동 롤의 회전 각속도를 추정하는 최소차원 상태 관측기를 설계한다. 마지막으로 컴퓨터 시뮬레이션을 통하여 상태 관측기로부터 추정된 각 롤 회전각속도와 슬립률의 유용성을 고찰한다.

상태관측기를 이용한 IPMSM의 센서리스 제어 (Sensorless Control of IPMSM using State Observer)

  • 송재주;이정철
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2003년도 춘계학술대회 논문집 기술교육전문연구회
    • /
    • pp.71-74
    • /
    • 2003
  • The paper is proposed to position and speed control of interior permanent magnet synchronous motor(IPMSM) drive without mechanical sensor. A minimum order state observer is used for the mechanical state estimation of the motor. The observer was developed based on nonlinear model of IPMSM, that employs a d-q rotating reference frame attached to the rotor. A minimum order state observer is implemented to compute the speed and position feedback signal. The validity of the proposed sensorless scheme is confirmed by various response characteristics.

  • PDF

관성 모멘트 동정에 의한 유도전동기의 저속운전 특성개선 (The Improvement of low speed driving characteristics of induction motor by inertia moment identification.)

  • 이성근
    • 한국정보통신학회논문지
    • /
    • 제2권4호
    • /
    • pp.627-634
    • /
    • 1998
  • 본 논문에서는 관성 모멘트 동정에 의해 상태관측기의 성능 및 유도전동기의 저속운전 특성을 개선하는 알고리즘을 제안하였다 저속운전 영역에서 저 분해능 엔코더를 사용하는 속도 검출법은 속도 주기내에 펄스수가 너무 적어 정확한 속도정보를 얻을 수 없다 이러한 문제점을 개선하고자 속도와 외란을 추정할 수 있는 고피나스 이론에 근거한 상태관측기를 설계하여, 외란이 제거된 제어를 수행하였다. 또한 추정된 속도와 외란의 오차를 최소화하기 위하여 전동기의 관성 모멘트를 추정하고, 관측기의 공칭 관성 린멘트를 동정하였다. 시뮬레이션과 실험결과로부터 제안된 알고리즘은 6[rpm] 이하의 저속영역에서 과도응답 특성의 향상을 보여주었다.

  • PDF