• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2002.11a
• /
• pp.127-129
• /
• 2002

In order to predict the moldability of an injection molded part, a simulation of filling is needed. Short shot is one of the most frequent troubles encountered during injection molding process. The adjustment of process conditions is the most economic way to troubleshoot the problematic short shot in cost and time since the mold doesn't need to be modified at all. But it is difficult to adjust the process conditions appropriately in no times since it requires an empirical knowledge of injection molding. In this paper, the intelligent CAE system synergistically combines fuzzy-neural network(FNN) for heuristic knowledge with CAE programs for analytical knowledge. To evaluate the intelligent algorithms, a cellular phone flip has been chosen as a finite element model and filling analyses have been performed with a commercial CAE software. As the results, the intelligent CAE system drastically reduces the troubleshooting time of short shot in comparison with the expert's conventional way which is similar to the golden section search algorithm.

• Journal of the Korean Wood Science and Technology
• /
• v.38 no.4
• /
• pp.333-340
• /
• 2010

The Korean Dendropanax lacquer, made from a natural resinous sap from Dendropanax orbifera Lev., was used as a golden and transparent varnish for the traditional artifacts (armor uits, helmets, arrowheads, etc.) to make them be brilliant golden color. The cured film of the acquer has excellent protective properties such as weatherability, water resistance, and nticorrosive. But, one of disadvantages is that takes a long time and much energy to fulfill curing the lacquer. The chemical constituents of the lacquer contained conjugated diene compounds s the photopolymerizable monomers. These monomers easily polymerized in sunlight to form olden-colored, hard-coating films in a short time. Photooxidation may be one of the most mportant reactions in the chemistry of the lacquer. Although the Korean Dendropanax Lacquer hould be dried to a thoroughly dry stage to achieve optimal film properties, curing with elevated emperatures may be required for the protracted curing time at atmospheric temperature. So we ntended to accelerate the curing rate of the lacquer by dual curing of thermal and radiation uring. The effect of thermal initiator on the thermal curing reaction was evaluated by monitoring he changes in double bond peak with FT-IR. Then the curing rate of the lacquer blended with hermal initiator and photoinitiator together was measured during dual curing using a RPT with V spot curing machine. Thermal initiator not only accelerated the curing rate but also improved he physical property. And the curing rate of the Korean Dendropanax lacquer was improved by ual curing method of thermal and UV curing. According to these results, the application area of he Korean Dendropanax lacquer could be expanded to surface coatings for electronic devices uch as mobile phones or electronics.

• Korean Journal of Agricultural Science
• /
• v.40 no.4
• /
• pp.325-331
• /
• 2013

This experiment has been carried out to determine optimal culture conditions for the production of cut flowers and tubers of Calla (Zantedeschia 'Golden Affair' and 'Black Magic') in highlands. Treatments consisted of various levels of root zone environments, Results are as follows: Calla 'Golden Affair' were grown with different mulching materials such as Non-mulching, Black film, reflective film, Rice hull. Mulching materials resulted in no difference in the number of cut flowers but flower length was highest in reflective film. Calla 'Black Magic' were treated with various soil water content, soil type and watering time. Number of cut flowers and flower quality were greatest when the plants were watered at -80 kPa soil water content. No symptoms of soft rot (Erwinia carotovora) was observed at this soil water content. The occurrence of soft rot was observed with similar percentage according to soil type and the soil water content. When Calla 'Black Magic' were watered at the time of soil surface drying, growth was greater compared to others. Air temperature and PPF affected plant growth and photosynthesis. Photosynthetic rate was greatest at $25^{\circ}C$ and PPF $200{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$, while lowest at $28^{\circ}C$ and PPF $800{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$. Soft rot did not occur without regard to dipping treatment (0, 5, 10, 24, 48 hours) when the day and night temperature were maintained at $25^{\circ}C$ and $20^{\circ}C$, respectively.

• The Journal of the Korea Contents Association
• /
• v.21 no.4
• /
• pp.166-176
• /
• 2021

Due to urbanization and industrialization, the importance of large-scale fire prevention, management and measures is increasing day by day. However, the fire site arrival rate in Golden Time, which is a factor that can minimize large-scale fire damage, of Pohang, a large city with a population of over 500,000, is relatively low. So additional fire fighting power deployment and infrastructure investment are required. However, as budget and manpower are limited, it is necessary to selectively deploy fire fighting power and invest in infrastructure. Therefore, this study attempted to present a fire damage rating that can compare the level of fire damage, which is an index that can help selectively provide fire fighting services in Pohang and make related decisions. For the index, the OD cost matrix was used to predict fire vulnerable areas with a high probability of increasing the fire scale in the event of a fire. Also fire damage was measured by predicting the level of fire damage in the event of a fire according to population, building density, and access of fire trucks. It is expected that the fire damage rating will be able to help in various decisions related to fire fighting service deployment and services not only in Pohang city, but also in other regions.

• SUVANNABHUMI
• /
• v.4 no.1
• /
• pp.57-90
• /
• 2012

This essay is for a study on the survey of buddhist cultural literary document about the Southeast Asia by Nanqishu(南齊書), Liangshu(梁書), Chiu T'angshu(舊唐書), Hsin T'ang shu(新唐書) which are included in the Chinese Official History and Jí-shénzhōu-sānbăo-găntōng-lù(集神州三寶感通錄), Weioshu Shilao Ji (魏書 釋老志). These documents allows us to imagine next some historical states. First, these documents are recording this area, especially Funan, as a plentiful diggings of gold, silver, tin, copper, etc. These are important materials for gilt bronze sculptures. Further, this local produced gold called 'Yangmai(楊邁)' is recognized as same as Zĭmòjīn(紫磨金) in china, and these documents explains the process of producing the bronze images and golden ornaments in Southeast Asia. Specially, this plentiful materials leads them to make a 10 wei(圍) tall golden-silver image which worshiped as hindu god or sometimes buddhist images. Second, Vietnam and Funan in Northern and Southern Dynasty periods were in antagonistic relationship not only in the political but also in religious between Vietnamese Hinduism and Funan's Buddhism. Under this situation, the monk Nagaxian(那伽仙) who had came from India was accredited to Southern Qi court as a delegate to build a good relationship by the common religion Buddhism. It means the Buddhism of Southeast Asia also took a role of diplomacy. Third, these documents proved the active Southeast Asian cultural exchange in early 3th century. At this time, Funan delegate Suwu(蘇物) visited the court of Kushan Dynasty in India and he is seemed to travel the city of Pātaliputra. It oppressed us to extend our outlook which have been restricted in the relationship between Southern india and Southeast Asia to more broaden area. In addition, the buddhist art of Southern India and Bodhgaya temple was imported to Southeast Asia directly to send to Southern China. For example, the wooden buddha image, Bodhgaya stupa image, and Sri Lanka style's buddha images are looked be introduced to Southern China at this time throughout the Southeast Asia. At last, we got to know that the court music of Kucha in the northern silk route was imported to the Southeast Asia in early middle age. Even it may be introduced by China, but this document is very important to make the surmise is not unreasonable that the buddhist culture of northern silk route imported to the Southeast Asia accompanied with Kucha music. The buddha images in Gandharan style which are excavated from some site of Southeast Asia may demonstrate this literary sources is authentic.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.4
• /
• pp.332-337
• /
• 2023

Korea is not only surrounded by the sea on three sides, but also has national and local rivers extending 26,843 km, so it has a geographical feature in which abundant sea and inland water surface coexist. As the number of ships operating in the inland waters is continuously increasing due to the improvement of national income, the risk of ship accidents and human casualties in the inland waters is also increasing. In this study, a macroscopic plan for the safety management of inland water ships was presented through investigation of inland water related laws and operation status analysis. As an improvement plan, as a hardware infrastructure it is proposed to secure sufficient inland water fire-boats to secure the golden time for early response to accidents and lifesaving, and to operate an institution specializing in the prevention of inland water ships accidents. And as a software infrastructure, establish departure control standards for inland water ships and the safety diagnosis system currently applied only to sea going ships, the introduction of a system tailored to the characteristics of inland water ships. The proposed inland water safety management policy is expected to contribute to the preparation of prompt and systematic countermeasures in the event of an inland water ship accident, and it is hoped that it will serve as an opportunity to continue to pay attention to safety-related research on inland water ships, which was briefly activated after the sinking of M/V Sewol.

• Journal of Fashion Business
• /
• v.10 no.3
• /
• pp.78-86
• /
• 2006

Coffee extract dyeing on silk fabric using various mordanting agents at different mordanting condition was studied in our previous research. Coffee extract dyeing can exert beautiful colors and have several advantages over the conventional natural dyeing. Since most of natural dyes are expensive for mass production, strongly season and source dependent, and hard to store, and therefore, coffee waste was used as natural dye to create beautiful colors in this study. Coffee waste is inexpensive and easy to store, and provide a comparatively regular quality regardless of season and source. The effects of dyeing condition such as dyeing temperature, dyeing time, and liquor ratio on dyeing characteristics of silk fabrics were investigated. Coffee extract dyed silk showed brilliant colors, and the colors were different with the kind of mordant. Cu, Sn, and Al mordanted silks showed golden yellow with subtle change of hue and value, while Fe mordanted silk showed a brownish green color upon coffee extract dyeing. As the dyeing temperature increased, the dyeability generally increased in all mordanted silk fabrics except Fe mordanted silk until $45^{\circ}C$. The dyeing temperature did not affect the dyeability of Fe mordanted silk fabric. As the liquor ratio increased, the dyeability showed a gradual increase in all mordanted silk except Cu mordanted silk. Cu mordanted silk fabric showed an abrupt increase in dyeability at liquor ratio1:150. The dyeing time effect can be separated into 2 stages. During the initial half an hour, the dyeability did not change significantly, and then, increased after 45 min. dyeing time duration. A further increase in dyeing time after 45 min. did not affect the dyeing efficiency in all mordanted silk fabrics except the Cu mordanted.

• Korean Security Journal
• /
• no.60
• /
• pp.33-61
• /
• 2019

It is quite difficult to actually prove the effectiveness of so-called target-hardening, one of the various strategies used to reduce crime, one of the serious problems in society recently. In particular, three to five minutes is often used as golden time for intruders to give up or stop, which is based on foreign and some indirect research cases in Korea, but there were no studies that more directly identified the average break-in operation time or the abandonment time based on the elapsed time when the shield hardware resists intruders. This study was the first of its kind in Korea to investigate and verify samples of 90 inmates of break-in burglars who were imprisoned in August 2018 by profiling the average criminal experience, education level, age, height and weight of typical Korean professional break-in thieves, and specific criminal methods, average break-in operation time, and the criteria for giving up if not breached. According to the analysis results, in the survey on the number of pre-invasion theft crimes by intruders, many of the respondents who participated in the survey were criminals of professional invasions, and by their physical characteristics, there was not much difference from ordinary adult men. Residential facilities were the highest in the world, followed by commercial and educational facilities. According to the survey on the types of facilities that committed intrusion into residential facilities, it was not safe to say that single-family housing accounted for the largest portion of single-family housing, multi-family housing, apartment high-rise (more than three stories), and apartment low-rise (more than one to three stories) among residential facilities, and that the ratio of apartment high-rise was higher than expected. Based on the average time required to break into a place for an intrusion crime, it is assumed that the psychological time worked in a place where the break-in was difficult, since the break-in was not performed while measuring the time of the break-in operation. In the case of time to give up a crime, more than half of the respondents said they would give up the crime even in less than four minutes, suggesting that a significant number of intrusive crimes can be prevented even if the facility has four minutes of intrusion resistance. This proves that most intruders will give up the break-in if the break-in resistance performance of the security facility is exercised for more than five minutes.

• Archives of Reconstructive Microsurgery
• /
• v.8 no.1
• /
• pp.22-27
• /
• 1999

While the conventional end-to-end anastomotic technique is accepted as 'the golden standard' for microvascular anastomosis, it is time-consuming and tedious. In an effort to offer faster and safer ways of performing microvascular anastomoses, numerous anastomotic techniques have been proposed, but further refinements in microvascular techniques are still necessary. A 'continuous suture with interrupted knot' technique was devised for faster and safer anastomosis. It has been successfully used in microanastomoses of both artery and vein for free tissue transfer. It is a combination of the interrupted suturing technique and the continuous suturing technique. First, a continuous suture is made with the size of loop decreasing in order, and then the sutures are tied individually from the first loop to the last one as in the conventional interrupted suturing technique. It was applied clinically to fourteen patients over the past ten months and found to be a highly efficient technique that satisfied our needs. This 'continuous suture with interrupted knot' technique has several advantages over other techniques : The operative time is reduced comparing conventional interrupted suture technique. By delaying the tie and with the vessel walls kept separated, the risk of through-stitch can be reduced. Tying all the sutures at one time not only speed up the procedures, but also reduced the surgeon's fatigue. In addition, it has no problem of anastomotic stenosis which is a disadvantage of continuous suture technique. This technique proved to be faster and safer, and has patency equal to that of the conventional end-to-end anastomosis. It is of great help to the surgeon in reducing operative time, especially in clinical situations when many anastomoses are required, or lengthy grafting procedures are undertaken.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.49 no.5
• /
• pp.373-380
• /
• 2004

The production of sweet (su) and super sweet corns (sh2) has been economically feasible in Korea in recent years. Major factors limiting super sweet corn production are low germination and low seedling vigor. Since seed quality is closely related to seed maturity, the optimum harvest time for the seed production of sweet and super sweet corns was studied and the quality of seeds with varying maturities was investigated in 2001 and 2002 cropping seasons. The parents of the sweet corn seeds were Hybrid Early Sunglow and 'Golden Cross Bantam 70' and those of super sweet corn were Xtrasweet 82 and 'For­tune'. Seeds were harvested at 21, 28, 35, 42, 49, and 56 days after silking (DAS). As the seeds developed, seed weight of sweet corn increased and the seed moisture content decreased faster than that of super sweet corn. Germination rates of sweet corn seeds harvested 21 and 28 DAS at $25^{\circ}C$ and emergence rates in the cold soil test were significantly lower than those of seeds harvested after 42 DAS in both years. Although the germination rates of super sweet corn seeds with varying maturities showed similar patterns as sweet corn seeds at $25^{\circ}C$, the emergence rate of super sweet corn seeds in cold soil test continuously increased with seed maturity. This suggests that seed quality of super sweet corn should be tested in a cold soil test to estimate field emergence. As the seeds developed, leakage of total sugars and electrolytes from the both sweet and super sweet corn seeds decreased up to 42 or 49 DAS. The $\alpha-amylase$ activities of both sweet and super sweet corn seeds increased with seed maturity from 21 to 35 or 49 DAS depending on genotype and year. The optimum harvest time for the seed production of sweet corn was 42 DAS and 49 DAS for super sweet corn considering emergence rate and plumule dry weight in the cold soil test, leakage of sugars and electrolytes from the seeds, and $\alpha-amylase$ activity.