• Economic and Environmental Geology
• /
• v.29 no.3
• /
• pp.235-246
• /
• 1996

Placer gold in collected heavy minerals from several localities in Huongkhe area, is consistently very finegrained (${\leq}100$ to $400{\mu}m$). The size and size distribution show somewhat differences at Dongdo and Hoahai : at Dongdo, predominant relatively larger and wide distribution; at Hoahai, characteristic relatively finer and narrow distribution range. The morphology of gold grains is divided into the four groups assumed by the dimension ratio : spherical, subprismoidal, prismoidal, and irregular. The gold grains at Dongdo show wide morphological distribution, whereas, at Hoahai, spherical form is predominant (${\approx}75%$). Three main types of gold are classified based on their chemical composition and mode of occurrence: type I (electrum; fineness=568~931), type II (amalgam; fineness=671~927), and type III (native gold; fineness=923~999). Type I gold contains, relatively high and variable silver contents (${\approx}11$ to 58 atomic % Ag), and has been classified into two subtypes based on their silver contents (type IA, ${\approx}11{\sim}39$ atomic % Ag; type IB, ${\approx}40{\sim}58$ atomic % Ag). However, type I gold would have been generally original compositions of electrum which originated at the provenance deposits. Mercury reacts with gold and silver to form amalgam (type II gold) which has variable Hg contents (1.2~30.5 atomic % Hg). The mercury contents in gold grains at Hoahai (10.9~30.5 atomic % Hg) are higher than those at Dongdo (5.8~21.1 atomic % Hg). The gold grains from the area generally exhibit a high-purity gold (type III) rim. The individual rims on the various grains range from <1 to $80{\mu}m$ in thickness and have silver contents of <10 atomic percent Ag, even though the core compositions range from ${\approx}11$ to 58 atomic percent Ag. The rim of gold most likely is responsible for the commonly cited cases of gold from placer deposits assaying at higher values of fineness than the gold in the corresponding source lode. The gold-rich rim in the Huongkhe area apparently forms by a combination of self-electrorefining and preferential dissolution of silver under oxidizing nature during the weathering and transport process. All data of gold grains in the Huongkhe area suggest that the transport distances and/or time of placer gold at Hoahai are generally farther than those at Dongdo. The mercurian gold bearing provenance deposits at Dongdo and Hoahai would be suggest nearest epithermal gold-silver vein-type.

• Economic and Environmental Geology
• /
• v.30 no.1
• /
• pp.15-23
• /
• 1997

Gold mineralization of the Ogkye gold mine was deposited mainly in quartz veins up to 150 cm wide which occupy fissures in Cambrian Pungchon limestone. Ore minerals are relatively simple as follows: pyrite, arsenopyrite, pyrrhotite, sphalerite, electrum and galena. On the basis of the Ag/Au ratio on ore grades, mode of occurrence and assoicated mineral assemblages, the Ogkye gold deposit can be classified as pyrite-type gold deposit (Group IIB). Fluid inclusion data indicate that ore minerals were deposited between $400^{\circ}$and $230^{\circ}C$ from relatively dilute fluids (0.2 to 7.3 wt.% eq. NaCl) containing $CO_2$. The ore mineralization resulted from a complex history of $CO_2$ effervescence and local concomitant boiling coupled with cooling and dilution of ore fluids. Gold deposition was likely a result of decrease of sulfur activity caused by sulfide deposition and/or $H_2S$ loss accompanying fluid unmixing. Sulfur isotope compositions of sulfide minerals (${\delta}^{34}S=3.5{\sim}5.9$‰) are consistent with ${\delta}^{34}S_{H_2S}$ value of 4.8 to 6.1‰, suggesting mainly an igneous source of sulfur partially mixed with wall-rock sulfur.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2010.05a
• /
• pp.193-194
• /
• 2010

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2009.11a
• /
• pp.277-278
• /
• 2009

• Water for future
• /
• v.50 no.12
• /
• pp.49-53
• /
• 2017

• Korean Journal of Food Science and Technology
• /
• v.31 no.1
• /
• pp.1-6
• /
• 1999

A piezoelectric (PZ) biosensor system detecting Salmonella spp. was developed. The system consisted of an oscillator, a frequency counter and an antibody-immobilized quartz crystal. An anti-Salmonella antibody was immobilized on one gold. surface of the quartz crystal with protein A. Salmonella detection was made by measuring resonant frequency shift owing to a mass change by specific binding of microbial cells to the gold surface of the PZ crystal. The PZ antibody sensor was operated optimally at 0.1M phosphate buffer, pH 7.2 and $35^{\circ}C$. The sensor was quite specific to Salmonella spp. The obtained frequency shift was correlated with the Salmonella concentration in the range of $10^5{\sim}10^6\;CFU/mL$. The frequency shift increased further by addition of polystyrene beads. The Salmonella detection which is indicated by a steady-state microbial adsorption to the quartz crystal was accomplished within 50min.

• Elastomers and Composites
• /
• v.34 no.1
• /
• pp.45-52
• /
• 1999

This paper describes how the gold particles self assemble on the specific phase on the microphase separated block copolymer thin film and form a well ordered patterns. For this study, polystyrene-polybutadiene-polystyrene (PS-PB-PS) triblock copolymer (30wt % PS) thin films (${\sim}100nm$) having a cylindrical morphology were cast from 0.1wt% toluene solution to be used as polymer thin film templates. The films having either vertical PS cylinders or in-plane PS cylinders in PB matrix from each different solvent evaporation condition were obtained. Cross-sectional transmission electron microscopy(TEM) was used to study the surface and bulk morphologies of block copolymer thin films. Small amount of gold particles was evaporated on a block copolymer thin film template to obtain a nano-scale pattern. When an as-cast thin film template was used, gold particles preferentially self assemble on the low surface tension PB phase and a relatively well ordered pattern in nano-scale was produced. However, after the formation of a low surface energy PB rich layer upon annealing, a gold self-assembled pattern was not observed.

• Journal of Ecology and Environment
• /
• v.30 no.2
• /
• pp.121-126
• /
• 2007

We monitored gold-spotted pond frog (Rana chosenica) populations near the Korea National University of Education in Chungbuk, Korea, from 19 May to 8 August, 2006 to examine the spatial distribution of populations in local areas and to investigate patterns of migration of adult gold-spotted pond frogs from terrestrial hibernation sites to breeding sites, We captured individuals from the largest population using a drift fence with 22 pitfall traps surrounding the breeding site. A total of 22 individuals (19 males and 3 females) were captured between 23 May and 15 June. No peak in breeding migration was detected, but the onset of the breeding migration may correspond with increased humidity. Male body weights were negatively correlated with sampling dates. Seven of 22 individuals were captured at the 4th pitfall trap, which was placed between two culverts. The capture rate per pitfall trap was higher in traps close to the rice field banks (1.44, traps $1{\sim}9$) than in traps facing hilly land (0.33, traps $13{\sim}18$). Comparative data from the Korean frog (Rana coreana), a sympatric species in the study area, were also collected and compared with those of the gold-spotted pond frog.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.10a
• /
• pp.38.1-38.1
• /
• 2011

Yellow gold는 아름다운 광택과 손쉬운 가공성의 장점 때문에 장신구를 비롯한 다양한 분야에서 그 활용 가치가 매우 높다. 본 연구에서는 yellow gold의 hardness 강화 및 품질향상을 위하여 다양한 열처리 조건 별 기계적 특성 변화를 비교 관찰 하였다. 열처리 전 yellow gold alloy의 구성성분을 조사하기 위하여 EPMA와 ICP-MS를 사용하여 정성분석 및 정량분석 결과를 수치화 하였다. 총 44개의 14K yellow gold를 사용하여 $750^{\circ}C$, 30 min 의 조건에서 solid solution treatment 후 $200{\sim}350^{\circ}C$ 온도 범위에서 $50^{\circ}C$ 간격으로 age-hardening을 실시하였다. 또한 열처리 전과 후 grain 들의 배열 및 size 변화를 관찰하기 위해 식각을 실시하였다. 식각된 시료는 optical microscope (OM)을 통해 각 열처리 조건에 따라 전 후 변화를 관찰 하였다. 열처리 전 14K yellow gold의 hardness의 평균값은 120.6 Hv를 나타내었다. Solid solution treatment 후 hardness는 95.7 Hv로 평균값이 감소하였고, age-hardening 후에는 14K yellow gold는 $260^{\circ}C$에서 159.8 Hv, $270^{\circ}C$에서 170.2 Hv로 열처리 전에 비해 약 41% 증가된 결과를 나타내었다. 하지만 $270^{\circ}C$ 부터는 over-aging 현상을 나타내었다. OM 분석 결과 열처리 전 불균일했던 grain들의 배열이 solid solution treatment 및 quenching 후 다소 균일해 짐을 확인할 수 있었고, grain size 또한 열처리 전에 비해 증가함을 알 수 있었다. Solid solution treatment 후 모든 시료의 hardness 값이 전반적으로 감소하였다가 age-hardening을 통해 grain들의 배열이 점차 안정화 되면서 hardness가 증가 하였고, over-aging 구간에서는 급격히 감소하는 경향을 나타내었다. 이 결과로 우리는 14K yellow gold에 대한 age-hardening 최적조건을 도출 하였고, 각 열처리 조건 별 grain 배열 상태의 변화를 관찰 할 수 있었다.

• Applied Chemistry for Engineering
• /
• v.22 no.5
• /
• pp.575-578
• /
• 2011

We fabricated a novel simple and rapid method of three dimensional nanoporous gold thin film (NPGF) onto a Au substrate using electrochemical deposition method. The NPGF-modified electrode analysis by scanning electron microscope and reveals the formation of nanopores, approximately 30~50 nm in diameter. differential pulse voltammetry was measured for the determination of ${\gamma}$-aminobutiric acid in the concentration range of ($10{\sim}100{\mu}M$ using a NPGF. The high sensitivity feature of NPGF is expected to be applied for real sample biosensor applications.