• Economic and Environmental Geology
• /
• v.31 no.5
• /
• pp.389-398
• /
• 1998

The Au-Ag deposit of the Oknam mine occurs as gold-silver-bearing rhodochrosite veins in biotite schist and phyllite of the Precambriam Yulri Group. Five stages of ore deposition are recognized, each showing a definite mineral assemblage. General mineral parageneses in veins (stage III) associated with gold and silver vary inwardly from the vein margin: arsenopyrite + pyrite $\Rightarrow$ sphalerite+chalcopyrite+galena+gold $\Rightarrow$ ga1ena+Ag-bearing minerals. Fluid inclusion data indicate that temperature and salinity of ore fluids overally decreased with time: $345^{\circ}{\sim}240^{\circ}C$ and 3.4~7.8 wt. % NaCl equiv during stage I (quartz vein mineralization), $313^{\circ}{\sim}207^{\circ}C$ and 2.3~8.7 wt.% NaCl equiv during manganese-bearing carbonate stages (II and III), and $328^{\circ}{\sim}213^{\circ}C$ and 3.6-5.4 wt.% NaCl equiv during stage IV (quartz vein mineralization). The ore fluids probably evolved through repeated pulses of boiling and later mixing with cooler and more dilute meteoric waters. Fluid inclusion data and geologic arguments indicate that pressures during the mineralization were in the range of 90 to 340 bars. Gold occurs as silver-rich electrums (21 to 29 atom. % Au) and was deposited at temperatures between $300^{\circ}$ and $240^{\circ}C$. Thermochemical calculations suggest that gold was deposited as a combined result of increase in pH and decreases in temperature, $fs_2$ and $fo_2$.

• Asian Journal of Turfgrass Science
• /
• v.23 no.1
• /
• pp.23-34
• /
• 2009

Research was initiated to investigate early establishment characteristics and germination pattern of tall fescue(TF, Festuca arundinacea Shreb.). Four varieties of TF were evaluated in the study. Experiment was conducted under a room temperature condition of $5^{\circ}C$ to $25^{\circ}C$(natural conditions). Daily and cumulative germination patterns were measured and analyzed on a daily basis. Significant differences were observed in germination patterns, days to the first germination, days to 50% germination, days to 75% germination, and germination percentage with different environments and varieties. Germination percentage was variable with varieties at the end of study. It was 85.25 to 97.00% under natural conditions. There were considerable variations in early germination characteristics and patterns among the entries according to different conditions. The first germination was initiated between 7 and 9 DAS(days after seeding) under natural conditions, being 2 to 3 days later as compared with ISTA conditions. It was 11 to 12 DAS in days to the 50% germination, which was 3 to 4 days after the first germination. Days to the 75% germination were 12.38 to 14.29 DAS, being 1.55 to 4.77 days slower as compared with ISTA conditions. Olympic Gold was regarded as the fastest variety and Tar Heel II was slowest. Data from this study demonstrated that information on differences in germination characteristics and patterns among varieties would be usefully applied for TF establishment such as golf course construction.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.15 no.4
• /
• pp.113-128
• /
• 2013

Those records indicate that Jik-geum Hyoong-bae fabric was imported from China and its period was during the fourteen and fifteen century. Gold threads used in three Jik-geum Hyoong-bae artifacts were all wrapped gold thread and gold thread of Danryeong from Young-dukdong, Yong-in, did not have a base, but instead the gold foil itself was attached to the silk cord. Such form of artifact had never been discovered before in Korea. Wrapped gold thread of Seoknamdong's basis was presumably bamboo paper. Three Jik-geum Hyoong-bae have the same weave structure. The ground is woven in a warp-faced 5-end satin weave. The pattern is brocaded with supplementary gold wefts. Supplementary gold wefts are composed of 1/4 twill binding by the odd number pairs of warps within every group of 10 pairs of warps. All of the Jik-geum Hyoong-bae textile were designed and weaved according to the overlapped collared costume's structure. This is also known as 'Jik-seong-pil-ryo'. One symmetric collared jacket excavated in Seok-namdong, Incheon, only has the right half of Hyoong-bae in the front. This is because symmetric collared jacket was made from overlapped collared costume. Tiger and peacock are the main patterns of Jik-geum Hyoong-bae which have realistic and free screen composition and this shows a huge difference to the later generation's standardized Hyoong-bae pattern.

• Economic and Environmental Geology
• /
• v.20 no.4
• /
• pp.261-271
• /
• 1987

Muguk gold deposits are composed of quartz veins emplaced along faults in Mesozoic granodiorite. General strikes and dips of the veins are $N15{\sim}20^{\circ}W$ and $70{\sim}80^{\circ}NE$. Associated ore minerals are pyrite, arsenopyrite, sphalerite, galena, chalcopyrite, pyrrhotite, native silver, argentite, tetrahedrite and electrum. Vein mineral paragenesis is complicated by repeated fracturing, but five distinct depositional stages can be recognized. Electrum grains are associated mainly with sulfide bands formed along both margins of pale pink quartz of stage 3, and with patches of pyrite aggregate of stage 4. Before the close down in 1972, Muguk gold mine yielded more than 8 tons of gold of which major portion was produced from the No.2 vein. No.2 vein, extending about 1,500m laterally, was exploited to a depth of about 750m. In 1984, Young-poong mining company acquired the mining property and began geologic mapping, geochemical and geophysical exploration, diamond drilling and exploration tunnelling around the mine area to seek for other rich gold-bearing quartz veins. As the Samhyungje vein was disclosed to be the most rich vein, exploration works were focussed on the Samhyungje vein. As of August 1987, 22,338m of diamond drilling and 9,652m of exploration tunnelling have been undertaken. Owing to the successful result of exploration, the Muguk mine commenced normal operation on January 1987, treating 5,500 tons of ore per month.

• Journal of the Korean Institute of Gas
• /
• v.12 no.2
• /
• pp.32-37
• /
• 2008

For a development of U-safety system, liquid/gas-sensors that are easy to carry and install in any place are needed. Therefore, in this work, we prepared porous gold using a templating method with nanoporous alumina, and it was used as sensing materials and electrode. The resulting materials showed high purity macroporous structure with $200{\sim}300\;nm$ of window-pore and $4.8\;m^2/g$ of surface area. Because porous gold had good electric conductivity, convenience to measure the change of electric resistivity and good reproducibility, it could be used as potential sensing materials. As a proof-of-concept test, the detection test for mercury ion was carried out.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.374-374
• /
• 2018

프로그래밍 언어로 개발된 프로그램들은 최종 사용자 입장에서 입력과 출력이 불편하다. 또한, 모의 결과를 분석하기 위하여 그래프를 작성하는 소프트웨어를 이용하면 시간이 오래 걸린다. 본 연구에서는 기 개발된 용수 감량공급 기준곡선을 반영한 단일 댐 모의 운영 모형을 최종 사용자가 쉽게 활용할 수 있도록 사용자 편의 환경을 개발한 것에 대해 소개하고자 한다. 용수 감량공급 기준곡선을 반영한 단일 댐 모의 운영의 사용자 편의 환경은 미국의 GoldSim Technology Group에서 개발한 GoldSim을 이용하여 개발하였다. 개발된 사용자 편의 환경에는 단일 댐 모의 운영에 필요한 여러 입력 자료를 쉽게 입력할 수 있도록 하였다. 단일 댐 모의 운영 입력 자료에는 월별 기본계획공급량, 가뭄 단계별 용수 감량공급 비율, 과거 유입량 시계열, 갈수 빈도 유입량 시계열, 가뭄 단계별 감량공급 실행 저수량, 초기 저수량, 저수용량 등이 있다. 개발된 모형의 초기값은 합천댐의 자료가 입력되어 있으나, 입력자료를 변경하여 다른 다목적댐의 모의 운영에 활용이 가능하다. 단일 댐 모의 운영 결과로서 모의 기간 내 발생한 용수별 용수 공급 부족량과 감량공급 일수를 확인가능하다. 또한, 단일 댐 모의 운영 결과를 다양한 그래프로 출력 할 수 있다. 출력 가능한 시계열 그래프는 사용자가 입력한 용수 감량공급 기준곡선, 모의 시 사용한 유입량 시계열, 가뭄 단계, 용수 공급량, 저수량이다. 연구의 사례와 같이 GoldSim을 활용하면 연구개발의 편의 환경을 별도의 편의 환경 개발자를 거치지안고 과학 기술자가 직접 개발할 수 있다.

• Journal of Powder Materials
• /
• v.17 no.4
• /
• pp.342-346
• /
• 2010

In the present work, water-based gold nanofluids were synthesized by the solution plasma processing (SPP). The size distribution and the shape of gold nanoparticles in the nanofluids were investigated using high resolution transmission electron microscopy (HR-TEM). The dispersion stability of gold nanofluids was characterized using zeta potential, as well. The thermal properties of gold nanofluids were measured by utilizing lambda measurement device. Nanofluids containing nanoparticles with $64.0{\pm}42.1\;nm{\sim}18.10{\pm}5.0\;nm$ in diameter were successfully synthesized. As diameter of nanoparticles decreased, dispersion stability of nanofluids increased and the enhanced ratio of thermal conductivity increased. The nanofluid with nanoparticles of $18.10\;{\pm}\;5.0\;nm$ in diameter showed approximately 3% improvement in thermal conductivity measurement and this could be due to the enhanced Brownian movement.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.107.1-107.1
• /
• 2012

Because of beautiful glossy and color, the value of gold leverage is very high in Europe. For improve the quality of white gold, we performed heat treatment on 14K white gold alloys at various age-hardening conditions. Age-hardening behavior and the related phase transformation changes were studied to elucidate the hardening mechanism of 14K white gold alloys. For solid solution treatment [ST], casted 14K white gold alloy specimens were treated at high temperature ($750^{\circ}C$) during 30 minute, and the specimens dropped to water for quenching immediately. For Age-hardening treatment [AT], the specimens were treated at various temperatures ($250^{\circ}C{\sim}300^{\circ}C$). After the heat treatment, we observed increased hardness from 144 Hv to 214 Hv by Vicker's hardness tester. Variation of the grain size measured by optical microscopy (OM) and scanning electron microscopy (SEM) images. By electron probe micro-analysis (EPMA) mapping analysis, we investigated that irregular particles were changed uniformly. After heat treatment, 14K white gold alloys showed improved hardness and became uniformity of grain size by age-hardening treatment.

• Journal of the Microelectronics and Packaging Society
• /
• v.15 no.3
• /
• pp.35-40
• /
• 2008

Investigation on immersion gold layers was carried out using TEM analysis for the purpose of understanding the defect of immersion gold layer. The immersion gold layers prepared with three different types of baths were observed. The results showed that the defect structure of immersion gold layer is strongly dependent on the types of gold baths. Spherical defects of average 10 nm size were located along the grain boundaries for the specimen formed at KAu$(CN)_2$ bath containing no reducing agent. In the case of the specimen processed at KAu$(CN)_2$ bath containing a reducing agent, the spherical defects of 5-10 nm size were distributed randomly in grains as well as at grain boundaries. However, such defects disappeared almost completely when $Na_{3}Au(SO_3)_2$ bath was used to fabricate an immersion gold.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.2
• /
• pp.352-356
• /
• 2011

Transparent conducting oxide films like ITO/Au/ITO and AZO/Au/AZO were fabricated with a sputter at a low-temperature of less then $70^{\circ}C$ and their crystallization and opto-electrical properties were studied. X-ray diffractiometry showed that single-ITO layer was amorphous, whereas, ITO of ITO/Au/ITO multi-layer was crystal. The ITO crystallization and its orientation depended on Au crystallization. Surface roughness of the ITO-multi-layers were in the range of 29-88% of that of ITO-single layer. ITO on amorphous gold layer had more rough surface than ITO on crystal gold. The gold layer between ITO improved electrical conductivity. Carrier density, mobility, resistivity and sheet resistance of ITO-single layer were $2.3{\times}10^{19}/cm^3$, $85{\times}cm^2$/Vs, $31{\times}10^{-4}{\Omega}cm$, and $310{\times}{\Omega}/cm^2$, respectively. Those of ITO/Au/ITO-multi-layers depended on Au-interlayer-thickness, which were in the range of $3.6{\times}10^{19}{\sim}4.2{\times}10^{21}/cm^3$, $43{\sim}85cm^2$/Vs, $0.17{\times}10^{-4}{\sim}25{\times}10^{-4}{\Omega}cm$, and $1.7{\sim}20{\times}{\Omega}/cm^2$, respectively. The sheet resistances of the single-layer ITO and the multi-layer ITO were 310 and $2.7{\sim}21{\Omega}/cm^2$, respectively. That of AZO/Au/AZO was $8.6{\Omega}/cm^2$, which was better than the single-layer ITO.