• Economic and Environmental Geology
• /
• v.21 no.3
• /
• pp.269-276
• /
• 1988

Ore deposits of Dadeok mine, the largest in the Bonghwa gold mining district, are composed of numerous gold and silver-bearing quartz veins emplaced in granite batholith. Mineralization of the Pungjeong vein, one of the representative vein in the mine was investigated. K-Ar age of sericite in the vein is $84{\pm}5$ Ma. Hypogene 6pen-space filling can be devided into four paragenetic stages; (1) fine grained quartz and carbonate; (2) quartz and carbonates with base metal sulfides, electrum, native silver, argentite, polybasite, freibergite, pyrargyrite, and Cu-Ag-Fe-S minerals; (3) quartz with base metal sulfides; (4) quartz and calcite with or without pyrite. Composition of electrum ranges from 44.17 to 56.50 atomic % Ag. Meanwhile FeS content of sphalerite coexisting with elctrum in stage II range from 0.01 to 1.67 mol. %. Homogenization temperatures for quartz and sphalerite of stage II ($239^{\circ}$ to $310^{\circ}C$), quartz of stage III ($206^{\circ}$ to $255^{\circ}C$) and quartz and calcite of stage IV ($232^{\circ}$ to $253^{\circ}C$) show little time-space variation during mineralization. Salinities of the fluid inclusions range from 5.5 to 12.8wt% NaCI in stage II, 7.3 to 12.3wt% in stage III and 4.5 to 8.0wt% in stage IV. Based on the homogenization temperatures, Fe content of sphalerite and Ag content of electrum, tempera ture and sulfur fugacity for stage II are estimated to be $208^{\circ}$ to $310^{\circ}C$ and $10^{-9.2}-10^{-12.8}$ bars, respectively.

• Economic and Environmental Geology
• /
• v.27 no.6
• /
• pp.537-548
• /
• 1994

The Weolyu gold-silver deposits at Hwanggan, Chungcheongbukdo, is of a late Cretaceous $(74.24{\pm}1.63Ma)$ epithermal vein-type, and is hosted in the quartz porphyry of late Cretaceous age. Based on mineral paragenetic sequence interpreted from vein structure and mineral assemblages, three stages mineralization were distinguished. A variety of ore minerals occurs including pyrite, sphalerite, chalcopyrite, galena with small amount of electrum, native silver, argentite, pearceite, sb-pearceite, argyrotite. The gangue minerals are quartz, rutile, calcite, apatite, fluorite and rhodochrocite. Wall-rock alteration such as pyritization, chloritization, sericitization, silicification is observed near the quartz veins. Au-Ag minerals were crystallized at middle and late stage of the two mineralization sequences. Results from the analysis of fluid inclusion and thermodynamic calculation indicate that Au-Ag mineral deposits were formed primarily by cooling and dilution of hydrothermal fluids($165{\sim}313^{\circ}C$, 0.4~2.4wt.% equivalent NaCl) with some degree mixing of meteoric water.

• Economic and Environmental Geology
• /
• v.31 no.5
• /
• pp.389-398
• /
• 1998

The Au-Ag deposit of the Oknam mine occurs as gold-silver-bearing rhodochrosite veins in biotite schist and phyllite of the Precambriam Yulri Group. Five stages of ore deposition are recognized, each showing a definite mineral assemblage. General mineral parageneses in veins (stage III) associated with gold and silver vary inwardly from the vein margin: arsenopyrite + pyrite $\Rightarrow$ sphalerite+chalcopyrite+galena+gold $\Rightarrow$ ga1ena+Ag-bearing minerals. Fluid inclusion data indicate that temperature and salinity of ore fluids overally decreased with time: $345^{\circ}{\sim}240^{\circ}C$ and 3.4~7.8 wt. % NaCl equiv during stage I (quartz vein mineralization), $313^{\circ}{\sim}207^{\circ}C$ and 2.3~8.7 wt.% NaCl equiv during manganese-bearing carbonate stages (II and III), and $328^{\circ}{\sim}213^{\circ}C$ and 3.6-5.4 wt.% NaCl equiv during stage IV (quartz vein mineralization). The ore fluids probably evolved through repeated pulses of boiling and later mixing with cooler and more dilute meteoric waters. Fluid inclusion data and geologic arguments indicate that pressures during the mineralization were in the range of 90 to 340 bars. Gold occurs as silver-rich electrums (21 to 29 atom. % Au) and was deposited at temperatures between $300^{\circ}$ and $240^{\circ}C$. Thermochemical calculations suggest that gold was deposited as a combined result of increase in pH and decreases in temperature, $fs_2$ and $fo_2$.

• Economic and Environmental Geology
• /
• v.50 no.2
• /
• pp.85-96
• /
• 2017

Gold mineralization of Samjeong and Yongjang gold mines in Uichang area shows characteristics of Bonanza-type gold deposits. Ores are mainly developed along the contact parts between quartz vein and arkosic sandstone beds(Fe-rich bed) in sedimentary rock. Electrum, silver sulfide and sulfate minerals are mainly in the ores. On the other hand, gold mineralization is less developed in cherty rock and andesitic rock than arkosic sandstone. The study highlights characteristics of gold precipitation in the deposit on the basis of numerical modelling of the reactions between the assumed hydrothermal ore fluids with multicomponent heterogeneous equilibrium calculations. Aqueous species, gases and minerals, containing electrum are included in the calculations. The reaction result between hydrothermal ore fluids and arkosic sandstone show that pH increasing in the ore-forming fluid would trigger precipitation of quartz, chlorite, sericite, chalcopyrite, galena, pyrite, electrum, actinolite and feldspar. The numerical modelling also illustrates the drastic increase of pH and desulfidation lead to precipitation of electrum. Ag/Au ratios in the ore vary with pH conditions and subsequently precipitation of silver-bearing sulfides such as acanthite and polybasite. The modelling of the reaction between andesitic rock and ore-forming fluid shows that mineral assemblages of the case are analogous to ones of the reaction between arkosic sandstone and fluid except the latter has little portion of electrum. The abovementioned modelling results suggest that gold-silver mineralization is bounded by host rocks at the study area.

• Economic and Environmental Geology
• /
• v.34 no.1
• /
• pp.25-38
• /
• 2001

Contrasts in the style of the gold-silver mineralization in geologic and tectonic settings in Korea, together with radiometric age data, reflect the genetically different nature of hydrothermal activities, coinciding with the emplacement age and depth of Mesozoic magmatic activities. It represents a clear distinction between the plutonic settings of the Jurassic Daebo orogeny and the subvolcanic environments of the Cretaceous Bulgugsa igneous activities. During the Daebo igneous activities (about 200-130 Ma) coincident with orogenic time, gold mineralization took place between 197 and 127 Ma. The Jurassic deposits commonly show several characteristics: prominent association with pegmatites, low Ag/Au ratios in the ore-concentrating parts, massive vein morphology and a distinctively simple mineralogy including Fe-rich sphalerite, galena, chalcopyrite, Au-rich eIectrum. pyrrhotite and/or pyrite. During the Bulgugsa igneous activities (120-60 Ma), the precious-metal deposits are generally characterized by such features as complex vein morphology, medium to high AgiAu ratios in the ore concentrates, and abundance of ore minerals including base-metal sulfides, Ag sulfides, native silver, Ag sulfosalts and Ag tellurides. Vein morphology, mineralogical, fluid inclusion and stable isotope results indicate the diverse genetic natures of hydrothermal systems. The Jurassic Au-dominant deposits were formed at the relatively high temperature (about 300 to 450$^{\circ}$C) and deep-crustal level (>3.0 kb) from the hydrothermal fluids containing more amounts of magmatic waters (3180; 5-10 %0). It can be explained by the dominant ore-depositing mechanisms as CO2 boiling and sulfidation, suggestive of hypo/mesothermal environments. In contrast, mineralization of the Cretaceous Au-Ag type (108-71 Ma) and Agdominant type (98-71 Ma) occurred at relatively low temperature (about 200 to 350$^{\circ}$C) and shallow-crustal level «1.0 kb) from the ore-fonning fluids containing more amounts of less-evolved meteoric waters (15180; -10-5%0). These characteristics of the Cretaceous precious-metal deposits can be attributed to the complexities in the ore-precipitating mechanisms (mixing, boiling, cooling), suggestive of epilmesothermal environments. Therefore, the differences of the emplacement depth between the Daebo and the Bulgugsa igneous activities directly influence the unique temporal and spatial association of the deposit type.

• Journal of the Mineralogical Society of Korea
• /
• v.16 no.3
• /
• pp.265-280
• /
• 2003

The Mugeuk mineralized area that associated with the pull-apart type Cretaceous Eumseong basin is composed of several gold-silver vein deposits that are emplaced in late Cretaceous biotite granite. The gold-silver deposits in the area show various hydrothermal alteration zones as well as Au/Ag ratios and ore mineralogy. The Geumbong mine showing relatively high gold fineness is composed of multiple veins and show alteration pattern; vein \longrightarrow phyllic \longrightarrow subphyllic \longrightarrow propylitic \longrightarrow subpropylitic zone. In contrast, The Taegeuk mines show the low fineness values, in far southern part are characterized by increasing tendency of simple and/or stockwork veins. The deposit displays alteration pattern; vein \longrightarrow propylitic \longrightarrow subpropylitic zone. Variations of alteration zone with depth show that phyllic zone are dominant in deeper level and propylitic zone sporadically overlapped by argillic zone are dominant in shallow level. The differences of alteration pattern between the gold-silver deposits are reflect the evolution of the hydrothermal fluids; the ore-forming fluids of the Geumbong mine are at relatively high temperature and salinity and highly-evolved meteoric water, developing phyllic zone, the Taegeuk mine containing greater amounts of less-evolved meteoric waters shows relatively low temperature and salinity in ore-forming fluids, developing propylitic zone. The various physicochemical environment for gold-silver mineralization in the Mugeuk mineralized area is due to proximity from heat source area (Mugeuk mine) to marginal area (Taegeuk mine) in a geothermal field. Therefore, it is suggested that the criteria for project exploration in the area are to focus on the area proximal to heat source and phyllic zone.

• Economic and Environmental Geology
• /
• v.23 no.1
• /
• pp.25-33
• /
• 1990

Gold-silver deposits of Deogheun and Beopjeon mines are composed of veins emplaced in Jurassic granite batholith. Based on ore structure and ore mineralogy, four distinct stages of mineral deposition are recognized in these ore deposits. Gold and silver minerals in Deogheun and Beopjeon-A ore deposits are precipitated in stage III and stage II, respectively. Mineral constituents of ores from these deposits are pyrite, sphalerite, arsenopyrite, pyrrhotite, chalcopyrite, galena, tetrahedrite, electrum, quartz and rhodochrosite. Cubanite, argentite and pyrargyrite occur only in Deogheun ore deposits. Ag content of electrum range from 42 to 66 atomic % in both ore deposits. Filling temperature of fluid inclusion from both ore deposits are as follows; stage I, $211-289^{\circ}$ ; stage II, $205-290^{\circ}$ ; stage III, $190-260^{\circ}$ ; stage IV, $136-222^{\circ}$ in Deogheun ore deposits. In Beopjeon-A ore deposits, stage I, $255-305^{\circ}$ ; stage II, $135-222^{\circ}$ ; stage III, $148-256^{\circ}$ ; stage IV, $103-134^{\circ}$. Salinities of fluid inclusions range from 1.6-8.5 wt. % equivalent NaCl in both ore deposits. Sulfur fugacities through stage II and III in Deogheun ore deposits inferred from data of mineral assemblage and fluid inclusion range from $10^{-11.0}-10^{-16.1}$1bars. Fluid pressure estimated from fluid inclusions which reveal boiling evidence range from 30-190 bars during mineralization in Deogheun ore deposits.

• Economic and Environmental Geology
• /
• v.41 no.1
• /
• pp.1-14
• /
• 2008

The Bongsang gold-silver deposit consists of quartz veins that fill along the fault Bone within Cretaceous andesitic lapilli tuff. Mineralization is occurred within fault-breccia zones and can be divided into two stages. Stage I which can be subdivided into early and late depositional stages is main ore mineralization and stage II is barren. Stage I began with deposition of wall-rock alteration minerals and base-metal sulfides, and was deposited by later native silver, Ag-bearing tetrahedrite, polybasite and base-metal sulfides such like pyrite, sphalerite, chalcopyrite and galena. Fluid inclusion data indicate that homogenization temperatures and salinities of stage I range from 137 to $336^{\circ}C$ and from 0.0 to 10.6 wt.% NaCl, respectively. It suggests that ore forming fluids were cooled and diluted with the mixing of meteoric water. Also, temperature and sulfur fugacity deduced mineral assemblages of late stage I are $<210^{\circ}C\;and\;<10^{-15.4}$ atm, respectively. Sulfur(3.4%o) isotope composition indicates that ore sulfur was mainly derived from a magmatic source as well as the host rocks. The calculated oxygen{2.9%o, 10.3%o(quartz: 7.9%o, 8.9%o, calcite: 2.9%o, 10.3%o)}, hydrogen(-75%o) and carbon(-7.0%o, -5.9%o) isotope compositions indicate that hydrothermal fluids may be meteoric origin with some degree of mixing of another meteoric water for paragenetic time.

• Economic and Environmental Geology
• /
• v.43 no.5
• /
• pp.491-503
• /
• 2010

Geochemical characteristics of the Moisan epithermal gold-silver deposit with total 140 samples in Haenam area, Jeollanamdo were studied by using multivariate statistical analysis (correlation analysis, factor analysis and cluster analysis). The correlation analysis reveals that Ag, Cu, Bi, Te are highly correlated with Au in the both non-mineralized and mineralized zone. It is resulted from the presence of Au-Ag bearing minerals (electrum, sylvanite, calaverite and stuezite) and non Au-Ag containing minerals (chalcopyrite, tellurobismuthite and bismuthinite). Mo shows relatively much higher correlation at the mineralized zone (0.615) than non-mineralized zone (0.269) which implies Mo content is strongly affected by Au-mineralization. While Mn, Cs, Fe, Se correlated with Au at the nonmineralized zone, they have negative correlation at the mineralized zone. Therefore, they seem to be eluviated elements from the host rock during gold mineralization. Sb is enriched during the gold mineralization showing high correlation at the mineralized zone and negative correlation at the non-mineralized zone. According to the factor analysis, Se, Ag, Cs, Te are the indicators of gold mineralization presence due to the strong affection of gold content in the non-mineralized zone. In the mineralized zone, on the other hand, Mo, Te and Sb, Cu are the indicators of gold and silver mineralization, respectively. While the cluster analysis reveals that Cd-Zn-Pb-S, Bi-Fe-Cu-Mn, Se-Te-Au-Cs-Ag, As-Sb-Ba are the similar behavior elements groups in the non-mineralized zone, Cd-Zn-Mn-Pb, Fe-S-Se, As-Bi-Cs, Ag-Sb-Cu, Au-Te-Mo are the similar behavior elements groups in the mineralized zone. Using multivariate statistical analysis as mentioned above makes it possible to compare the behavior of presented minerals and difference of geochemical characteristics between mineralized and non-mineralized zone. Therefore, it will be expected a useful tool on the similar type of mining exploration.

• Economic and Environmental Geology
• /
• v.29 no.3
• /
• pp.395-405
• /
• 1996

The Donjin deposits which is located in the Chinan Basin, are emplaced along $N10{\sim}40^{\circ}E$ trending fissure sets. So it is a sort of fissure-filling ore deposits. The results of paragenetic studies suggest two stages of hydrothermal mineralization; stage I: base-metal sulfides stage, stage II: late base-metal sulfides, electrum and silver-bearing sulfosalts stage. Au: Ag ratios of the electrums show that Ag atomic% are higher than that of Au. The temperature and salinity of the Donjin deposits estimated from fluid inclusion and sulfur isotope geothermometry are as follows; stage I: $240{\sim}315^{\circ}C$, 2.4~7.1 NaCl eq. wt.%, stage II: $190{\sim}268^{\circ}C$, 4.6~8.4 NaCl eq. wt.%. The estimated oxygen and sulfur fugacity during first stage mineralization, based on phase relation of associated minerals, range from $10^{-35}{\sim}10^{-39.7}$ atm. and$10^{-11}{\sim}10^{-13.4}$ atm., respectively. All these evidences suggest that the Dongjin deposits are polymetallic meso-epithermal ore deposits.