• Title/Summary/Keyword: Go-Around Procedure

Search Result 5, Processing Time 0.021 seconds

A Study on Aircraft Dynamic Response and Stability After Go-Around Using XGBoost Modeling Based on QAR Data (QAR 데이터기반 XGBoost 모델링을 활용한 복행 후 항공기 동적 반응 및 안정성 연구)

  • Je-Hyung Jeon;Hyeon-Deok Kim
    • Journal of the Korean Society for Aviation and Aeronautics
    • /
    • v.32 no.3
    • /
    • pp.44-52
    • /
    • 2024
  • The go-around procedure plays a crucial role in aviation safety, allowing pilots to abort unsafe landings and attempt a new approach. While existing studies have primarily focused on predicting the onset of go-arounds, relatively little attention has been paid to evaluating aircraft stability and performance after a go-around has been initiated. This study aims to address this gap by systematically assessing the dynamic response and stability of aircraft following a go-around using Quick Access Recorder (QAR) data. The methodology involves classifying go-around events into 'near-ground' and 'at-altitude' categories, and analyzing changes in pitch, descent rate, engine performance, and environmental factors after the initiation of the go-around to evaluate its stability and efficiency. The XGBoost machine learning algorithm is employed to model the aircraft's response post go-around and to predict stability across various go-around scenarios. The findings from this study provide insights that can enhance the safety and efficiency of go-around procedures through systematic analysis of QAR data, contributing to improvements in operational protocols and pilot training programs.

Unstable Approach Mitigation Based on Flight Data Analysis (비행 데이터 분석 기반의 불안정 접근 경감방안)

  • Kim, Hyeon Deok
    • Journal of Advanced Navigation Technology
    • /
    • v.25 no.1
    • /
    • pp.52-59
    • /
    • 2021
  • According to the International Air Transport Association (IATA), 61% of the accidents occurred during the approach and landing phase of the flight, with 16% of the accidents caused by unstable access of the commercial aircraft. It was identified that the pilot's unstable approach and poor manipulation of correction led to accidents by continuing the excessive approach without go-around manuever. The causes of unstable access may vary, including airport approach procedures, pilot error, misplanning, workload, ATC (Air Traffic Contol) congestion, etc. In this study, we use the flight data analysis system to select domestic case airports and aircraft type where unstable approach events occur repeatedly. Through flight data analysis, including main events, airport approach procedures, pilot operations, as well as various environmental factors such as weather and geographical conditions at the airport. It aims to identify and eliminate the tendency of unstable approach events and the causes and risks of them to derive implications for mitigating unstable approach events and for developing navigation safety measures.

A Study on Software Fault Analysis and Management Method using Defect Tracking System (결함 추적 시스템에 의한 소프트웨어 결함 분석 및 관리기법 연구)

  • Joon, Moon-Young;Yul, Rhew-Sung
    • The KIPS Transactions:PartD
    • /
    • v.15D no.3
    • /
    • pp.321-326
    • /
    • 2008
  • The software defects that are not found in the course of a project frequently appear during the conduct of the maintenance procedure after the complete development of the software. As the frequency of surfacing of defects during the maintenance procedure increases, the cost likewise increases, and the quality and customer reliability decreases. The defect rate will go down only if cause analysis and process improvement are constantly performed. This study embodies the defect tracking system (DTS) by considering the Pareto principle: that most defects are repetitions of defects that have previously occurred. Based on the records of previously occurring defects found during the conduct of a maintenance procedure, DTS tracks the causes of the software defects and provides the developer, operator, and maintenance engineer with the basic data for the improvement of the software concerned so that the defect will no longer be manifested or repeated. The basic function of DTS is to analyze the defect type, provide the measurement index for it, and aggregate the program defect type. Doing these will pave the way for the full correction of all the defects of a software as it will enable the defect correction team to check the measured defect type. When DTS was applied in the software configuration management system of the W company, around 65% of all its software defects were corrected.

Developing a semi-automatic data conversion tool for Korean ecological data standardization

  • Lee, Hyeonjeong;Jung, Hoseok;Shin, Miyoung;Kwon, Ohseok
    • Journal of Ecology and Environment
    • /
    • v.41 no.3
    • /
    • pp.78-84
    • /
    • 2017
  • Recently, great demands are rising around the globe for monitoring and studying of long-term ecological changes. To go with the stream, many researchers in South Korea have attempted to share and integrate ecological data for practical use. Although some achievements were made in the meantime, we still have to overcome a big obstacle that existing ecological data in South Korea are mostly spread all over the country in various formats of computer files. In this study, we aim to handle the situation by developing a semi-automatic data conversion tool for Korean ecological data standardization, based on some predefined protocols for ecological data collection and management. The current implementation of this tool works on only five species (libythea celtis, spittle bugs, mosquitoes, pinus, and quercus mongolica), helping data managers to quickly and efficiently obtain a standardized format of ecological data from raw collection data. With this tool, the procedure of data conversion is divided into four steps: data file and protocol selection step, species selection step, attribute mapping step, and data standardization step. To find the usability of this tool, we utilized it to conduct the standardization of raw five species data collected from six different observatory sites of Korean National Parks. As a result, we could obtain a common form of standardized data in a relatively short time. With the help of this tool, various ecological data could be easily integrated into the nationwide common platform, providing broad applicability towards solving many issues in ecological and environmental system.

The Effects of Radix aconiti on the Contraction of Rat's Spinal Cord Injury (부자(附子)의 경구투여(經口投與)가 RAT의 척수손상(脊髓損傷)에 미치는 영향(影響) 및 비교(比較))

  • Lee Geon-Mok;Kim Kyung-Sik;Lee Kang-Chang
    • Journal of Acupuncture Research
    • /
    • v.15 no.2
    • /
    • pp.105-116
    • /
    • 1998
  • Purpose In this study, We observed the recovery process in the ability to move in the hind limbs of the rats whose spinal cord injuries were treated by Radix acouniti(RA). The purpose of this study is to see the effects of Radix acouniti(RA) water extract on the contraction of rat's spinal cord injury. Procedure First, the rats were subjected to hemisectional spinal cord injuries by a scalpel blade. Those rats, then, were divided into three groups: Sham operated rats group and the experimental group, which received the Radix acouniti(RA) water extract, and the control group, which had no treatment. Their recovery in the ability to walk was observed by the Open Field Test (OFT) for 14 days after the injuries. Method The OFT was applied at four points: the hip, knee, ankle joint, and the tail. Each joint was given a movement rating of from 0 to 3, depending on the amount of movement. A movement rating of 0 designates no movement, a 1 designates slight movement, a 2 designates increased movement, and a 3 designates active movement. Slight movement is defined as a joint displaying less than or equal to 30% of that joint range, increased movement is displaying less than or equal to 60% of that joint's range, and active movement is greater than or equal to 90% of that joint's range. Tail movement is also graded on a scale of 0 to 3. A rating of 0 indicates that the tail is down 100% of the time, one of 1 indicates that the tail is down more than 10%, one of 2 shows that the tail is down less than 50% but more than 10% of the time, and one of 3 shows that the tail is down less than 10% of the time. All four ratings were added together and then averaged to arrive at a single score. Results The sham group which did not go through spinal cord injuries showed near normal results on all 3 joints and tail from right after the operation, which one would expect. The RA oral application group showed more effective recovery of movememt function than the control group around 4 days after the spinal cord injuries. However, after 14 days, both groups displayed almost the same degree of movement recovery. The results of this study are summarized as follows: 1. After 14days the spinal cord injuries, movement was recovered in sham operated group, control group, and experimented group in the hip, the knee, the tail and then the ankle of rats, in that order. 2. Around 7 days after the spinal cord injuries, the experimental group proved the effectiveness of the therapy in terms of movement recovery. 3. The level of ALT, ALP, AST in RA treated group was slightly increased. 4. The level of BUN and creatinine in RA treated group was slightly increased. The above results indicate that RA therapy at an early stage can bring about better movement recovery in patients with spinal cord injuries from traffic accidents or industrial disasters. But there is apparent side effect of RA on clinical, therefore the study on this should be continued.

  • PDF