• Journal of Pharmaceutical Investigation
• /
• v.21 no.4
• /
• pp.237-245
• /
• 1991

Matrix type silicone rubber devices were designed for long-term implantable drug delivery system. Release controlling agents (RCA), i.e., polypropylene glycol, polyethylene glycol, were employed to control drug release from the devices. The release rate of drug from RCA dispersed silicone matrices was mainly dependent on hydrophilicity-hydrophobicity of drug and RCA. In the case of hydrophilic drug, the release from the RCA dispersed matrix was regulated by swelling kinetics. Especially when the relatively hydrophobic polypropylene glycol was used, swelling control mechanism induced zero-order release kinetics. Whereas, the release of hydrophobic drug was resulted from partition mechanism. The effect of RCA was to increase drug diffusivity.

• Macromolecular Research
• /
• v.9 no.6
• /
• pp.332-338
• /
• 2001

Waterborne polyurethane as a new polymer electrolyte was synthesized by using relatively hydrophilic polyols. The morphology of polyurethane was changed as it was dispersed in water. In contrast to polyurethane ionomer, waterborne polyurethane did not form an ionic cluster but produced a binary system composed of hydrophilic and hydrophobic groups. In the colloidal system, the former and the latter existed at outward and inward, respectively. Waterborne polyurethane was prepared from poly(ethylene glycol) (PEG) /poly(propylene glycol) (PPG) copolymer, 4,4'-diphenylmethane diisocyanate(MDI), ethylene diamine as a chain extender, and three ionization agents, 1,3-propane sultone, sodium hydride and lithium hydroxide. PEG/PPG copolymer was used for suppressing the crystallinity of PEG and N-H bond was ionized for increasing the electrochemical stability of polyurethane. Low molecular weight poly(ethylene glycol) and poly(ethylene glycol dimethyl ether) (PEGDME) were used as plasticizers. DSC, FT-IR and $^1$H-NMR of the waterborne polyurethane were measured. Also, the ionic conductivity of solid polymer electrolytes based on waterborne polyurethane and various concentrations of low molecular weight poly(ethylene glycol) or PEGDME were measured by AC impedance.

• Journal of the Korean Wood Science and Technology
• /
• v.41 no.2
• /
• pp.149-157
• /
• 2013

The octopus type oligo-hydroxypropylene glycol ${\beta}$-D-glucopyranosides were successfully synthesized in this studies: the sterospecific compound of allyl 2, 3, 4, 6-tetra-O-acetyl-${\beta}$-D-glucopyranosides (1) was deacetylated with NaOMe in MeOH lead to allyl-${\beta}$-D-glucopyranoside (2) which was perallylated and followed by hydroboration and subsequent oxidation afforded (3-hydroxy-propyl) 2, 3, 4, 6-tetraO(3-hydroxy-propyl)-${\beta}$-D-glucopyranoside (4). As a result, not only allylpropylene glycol ${\beta}$-D-glucopyranosides (5, 7, and 9) but also hydroxypropylene glycol ${\beta}$-D-glucopyranosides (6, 8, and 10) were synthesized by repeated sequential perallylation followed by hydroboration/oxidation.

• Journal of Pharmaceutical Investigation
• /
• v.34 no.1
• /
• pp.29-34
• /
• 2004

The solubility and stability of quercetin in various vehicles were determined. The solubility of quercetin at $28^{\circ}C$ increased in the rank order of isopropyl myristate < oleyl alcohol < propylene glycol monolaurate < oleoyl macrogol­6 glycerides < linoleoyl macrogol-6 glycerides < propylene glycol laurate (PGL) < propylene glycol monocaprylate (PGMC) < polyethylene glycol-8 glyceryl linoleate < caprylocaproyl macrogol-6 glycerides < diethylene glycol mono ethyl ether (DGME). The addition of DGME to non-aqueous vehicles such as PGL ad PGMC markedly increased the solubility of quercetin. From the stability studies, it was found that quercetin was unstable due to rapid oxidation by dissoved oxygen. The addition of a combination of ascorbic acid and edetic acid (EDTA) at 0.1 % markedly decreased the degradation rates of quercetin in 40% polyethylene glycol 400 in saline. Quercetin was relatively unstable in non-aqueous vehicles such as PGL and PGMC alone, and PGL-PGMC co-solvent The degradation of quercetin in such non-aqueous vehicles was fast, depending on temperature. The addition of butylated, hydroxytoluene, butylated hydroxyanisole, citric acid and/or EDTA at 0.1 % was effective in retarding the degradation of quercetin.

• Journal of Electrochemical Science and Technology
• /
• v.7 no.1
• /
• pp.58-67
• /
• 2016

The corrosion behavior of duplex stainless steel AISI 2205 was investigated in ethylene glycol-water mixture in the presence of 50 W/V % LiBr at different concentrations and different temperatures. Cyclic polarization, impedance measurements and Mott-Schottky analysis were used to study the corrosion behavior the semi conductive properties of the passive films. The results showed that with increasing in the ethylene glycol concentration to 10 V/V%, the corrosion rate of the steel alloy substrate increased. In higher concentrations of ethylene glycol, corrosion current of steel decreased. The results of scanning electron microscopy of electrode surface confirmed the electrochemical tests. Electrochemical experiment showed that duplex steel was stable for pitting corrosion in this environment. The increase in the ethylene glycol concentration led to increasing the susceptibility to pitting corrosion. The corrosion current increased as the temperature rise and also pitting potentials and repassivation potentials shifted towards the less positive values as the temperature increased. According to Mott-Schottky analysis, passive films of stainless steel at the different temperatures showed both n-type and p-type semiconductor behavior in different potential.

• Elastomers and Composites
• /
• v.49 no.1
• /
• pp.31-36
• /
• 2014

Polyester polyols were synthesized by using each one mole of sebacic acid, isophthalic acid, ethylene glycol, and neopentyl glycol. The synthesized polyol had 56.6 mg KOH/g of hydroxy value and 1980 g/mole of molecular weight. From FT-IR structure analysis of polyester polyol, Hydroxy group(-OH) was observed around 3600 $cm^{-1}$, -CH shoulder of sebacic acid at 2950 $cm^{-1}$, carbony group of ester around 1730 $cm^{-1}$, and benzene ring of isophthalic ring was represented at 1600 $cm^{-1}$, 740 $cm^{-1}$. In case of polyurethane, hydroxy peak was showed at 3600 $cm^{-1}$, and -NH group around 3300 $cm^{-1}$, 1530 $cm^{-1}$. From $^1H$ NMR measurement of polyester polyol, it was found that sebacic acid was represented at 1.3, 1.5, 2.1 ppm, isophthalic acid at 7.3, 8.1, 8.7 ppm, ethylene glycol at 4.2 ppm, and neopentyl glycol at 0.8, 3.2, 3.9 ppm, respectively. In the polyurethane, it is almost the same as spectrum of polyester polyol, but showed very week peak at 7 ppm by benzene ring of toluene diisocyanate.

• Fire Science and Engineering
• /
• v.30 no.1
• /
• pp.24-30
• /
• 2016

Autoignition characteristic is an important factor of all combustible substances, and a critical determinant in assessing the effectiveness of fire hazard prevention. This study investigated the autoignition characteristic of mixtures of Ethylene Glycol and water using an ASTM D2155 type ignition temperature measuring apparatus. It was possible to get the minimum temperature as $434^{\circ}C$ from 100% Ethylene Glycol within range of $75{\sim}160{\mu}l$. A volume of $100{\sim}125{\mu}l$ of a mixed sample of Ethylene Glycol and water (80 : 20) was ignited at the same temperature ($434^{\circ}C$). Also it was possible to get the auto ignition temperature as $437^{\circ}C$ from a mixed sample of Ethylene Glycol and water (60 : 40) within range of $120{\sim}160{\mu}l$. The instantaneous ignition temperatures determined for $125{\mu}l$ of each of the three samples were $579^{\circ}C$, $595^{\circ}C$ and $611^{\circ}C$, respectively. Both auto ignition temperatures and instantaneous ignition temperatures were increased through the addition of water to the samples.

• Clinical and Experimental Reproductive Medicine
• /
• v.23 no.1
• /
• pp.41-49
• /
• 1996

본 연구는 체외수정에 의해 생산된 생쥐 배반포기배를 vitrification 방법으로 동결보존하였을때 높은 생존율을 얻기 위한 적정조건을 검토하고자 실시하였다. 배반포기배를 생산하기 위하여, B6CBA F1 (C57BL/6, (표현불가)${\times}CBA/N$, (표현불가)) 계통의 생쥐 미수정란에 $1{\times}10^6$ spermatozoa/ml 농도의 정자로서 수정을 유도하였으며, 이후 $37^{\circ}C$, 5% $CO_2$배양기내에서 96시간동안 체외배양하였다. 배양 4일째의 배반포기배는 발달상태에 따라 early, middle 그리고 hatching blastocysts로 구분하였다. 본 실험에 사용된 동결보존액은 30% Ficoll과 0.5mol의 sucrose가 첨가된 mDPBS 용액에 40%의 ethylene glycol를 첨가한 EFS 40 (Zhu et al., 1993) 이었고, 수정란은 $25^{\circ}C$의 상온에서 먼저 20% ethylene glycol에 노출된 후 EFS 40 용액으로 옮겨 액체질소에 침지하는 2단계 동결법에 의해 동결보존되었으며, 급속융해하여 다음과 같은 결과를 얻었다. 1. 체외수정율과 배양 4일째 배반포기까지의 배발달율은 각각 89.4%와 86.1%였다. 2. 20% ethylene glycol에서 5분간 평형된 후 EFS 40 용액에 냉동보존된 후 융해된 난자의 생존율은 20% ethylene glycol에 0, 1, 3분간 평형된 난자의 생존율에 비해 유의하게 높았다. 3. 배반포기배를 20% ethylene glycol에서 5분간, EFS 40 용액에 1분간 차례로 노출한 다음 체와배양하였던 바, 배양 24시간째 생존율은 $82.9%{\sim}88.4%$ 였다. 본 연구 결과, 체외수정, 배양된 생쥐 배반포기배는 20% ethylene glycol과 EFS40에 대한 노출만으로는 난자의 생존성에 나쁜 영향을 미치지 않는 것으로 미루어 보아 배반포기배의 초자화 동결이 가능함을 시사하였다. 따라서 동결 융해 후 높은 생존율은 상온에서 난자를 2단계 즉, 20% ethylene glycol에 5분간 평형시킨 후 EFS 40 용액에 노출하여 1분내에 LN2에 직접 침지하는 간편한 동결방법으로 얻을 수 있었다.

• Journal of Pharmaceutical Investigation
• /
• v.33 no.1
• /
• pp.45-49
• /
• 2003

The solubility and stability of ondansetron hydrochloride (OS) in various vehicles were determined. The effect of cyclodextrins (CD) on the solubility of OS in water was determined by equilibrium solubility method. The solubility of OS at $32^{\circ}C$ increased in the rank order of isopropyl myristate (IPM) < propylene glycol laurate (PGL) ${\ll}$ propylene glycol monolaurate < propylene glycol monocaprylate (PGMC) < poly(ethylene glycol) 400 < diethylene glycol mono ethyl ether (DGME) < ethanol < poly(ethylene glycol) 300 < water (36.1 mg/ml) ${\ll}$ propylene glycol (PG) (283 mg/ml). The addition of PG or DGME to non-aqueous vehicles such as IPM, PGL and PGMC markedly increased the solubility of OS. The addition of CDs in water increased the solubility. Apparent stability constant for the CD complexation with OS was calculated to be $25.5\;M^{-1}$ for $2-hydroxypropyl-{\beta}-CD\;(2HP{\beta}CD)$. Twenty mM ${\beta}-CD$, 69.4 mM sulfobutyl ether ${\beta}-CD$ and 115.4 mM $2HP{\beta}CD$ increased the aqueous solubilty of OS 1.27, 2.18 and 1.85 times, respectively. OS was stable in buffered aqueous solution (pH 5.0). However, OS was relatively unstable in non-aqueous vehicles in the order of PG

• Korean Journal of Animal Reproduction
• /
• v.16 no.3
• /
• pp.269-276
• /
• 1992

Studies were carried out to find the freezing media which gives no ice crystals in single(glycerol, ethylene glycol, dimethyl sulfoxide(DMSO)) and mixture solutions(glycerol＋propylene glycol, glycerol＋ethylene glycol) of permeable cryoprotectants in vitrification solution and to study effects of VS on the survival of vitrified mouse morulae. The results are summarized as follows: 1. In toxicity test of permeable cryoprotectants, 30% glycerol of single solution showed the highest FDA-score(4.1) in mouse morulae frozen compared among other single solutions. The FDA-score(4.1) of 30% glycerol was higher than 30% ethylene glycol(3.6) and DMSO(1.4( (P<0.05). 2. 20, 30 or 40% single solution of permeable cryoprotectants containing m-PBS with 10% sucrose and 20% BSA was not crystallized during cooling, but crystallized during warming. However, the 30% mixture solution of the two permeable cryoprotectants was not crystallized both during cooling and warming.3. When mouse morulae were frozen in 30% mixture solutions of two permeable cryoprotectants(glycerol and propylene glycol, glycerol and ethylene glycol), highest FDA-score(4.5) was obtained in a mixture solution of 20% glycerol and 10% ethylene glycol(20G10E) than other 30% mixture solutions(10G20E, 15G15E, 20G10P, 15G15P, 10G20P) and there was significant difference between 20G10E and 10G20E(P<0.05).