• 제목/요약/키워드: Gloves

검색결과 349건 처리시간 0.027초

맞춤 골프장갑의 구매의도에 따른 혁신기술수용모델(TAM)의 차이 (The Difference of TAM According to Purchase Intention of Customized Golf Gloves)

  • 장세윤;양희순;김현수;박정민;이유리
    • 한국의류학회지
    • /
    • 제34권7호
    • /
    • pp.1100-1110
    • /
    • 2010
  • This study investigates the attitude and intention of consumers to use customized golf gloves depending on the Technology Acceptance Model (TAM). TAM consists of perceived ease of use and perceived usefulness. To conduct the quantitative research, we collected data from 182 consumers. SPSS 14.0 was used for statistical analysis. Descriptive statistics, factor analysis, reliability analysis, t-test and path analysis were implemented. The results of this study are as follows. First, the subjects were divided into two groups with one group higher in purchase intention. The difference between the two groups was significant. The higher purchase intention group was higher in the perceived ease of use, perceived usefulness, and positive attitude toward customized golf gloves than the lower purchase intention group. In the lower group, the perceived ease of use and perceived usefulness influenced the intention to use through the attitudes of consumers. On the other hand, in the higher group, the perceived ease of use and perceived usefulness influenced the intention to use directly as well as through the attitude of consumers. Therefore, a different marketing strategy must be designed according to purchase intention in marketing innovative products.

라텍스 장갑의 세척 방법에 따른 세균 감소율 측정 (Bacteria reduction ratio by cleansing methods of latex gloves)

  • 양송이;오정민;송다혜;송보람;강명진;이명선;손가연;오상환
    • 한국치위생학회지
    • /
    • 제14권4호
    • /
    • pp.593-599
    • /
    • 2014
  • Objectives : Latex gloves hygiene is the most effective method to prevent infection of microorganisms and to reduce the incidence of cross infections. The aim of this study was to compare the bacteria reduction ratio of cleansing with water, liquid soap and alcohol gauze. Methods : The left side glove was the control group and the right side was the experimental group. The experimental group washed hand with water, soap, and alcohol gauze. The hand plate was inoculated by the hand and inoculated for 24 hours in $35^{\circ}C$. Results : Washing with water showed that CFU of control group was 1116.9 and that of experimental group was 302.8. Hand washing by water reduced 74.3% of bacteria. Liquid soap revealed that CFU of control group was 619.9 and that of experimental group was 8.3. Hand washing by liquid soap reduced 97.5% of bacteria. Alcohol gauze included 875.2 CFU in control group and 5.8 CFU in experimental group. Washing by alcohol gauze reduced 99.5% of bacteria. Conclusions : Based on the results, the most effective latex gloves cleansing method was recommended as the standardized hand washing with the liquid hand soap and alcohol gauze. The results can be used to improve training strategies for enhancing glove hygiene practice in dental clinic.

드론 제어의 편의성을 향상한 스마트 글러브 짐벌 제어 (Smart Glove Gimbal Control that Improves the Convenience of Drone Control)

  • 이승호;신수용
    • 한국정보통신학회논문지
    • /
    • 제26권6호
    • /
    • pp.890-896
    • /
    • 2022
  • 본 논문에서는 다양한 분야에 사용되는 드론의 제어에 편의성과 접근성을 높이기 위해 스마트 글러브를 통한 짐벌 카메라 제어를 구현하였다. 스마트 글러브는 사람의 제스처를 파악하여 블루투스를 통해 신호를 전달한다. 전달받은 신호는 GCS(Gound Control Station)을 통해 드론에 적합한 신호로 변환한다. 스마트 글러브의 신호는 짐벌락을 방지하기 위해 쿼터니언 방식으로 표현되지만, 짐벌 카메라의 경우 Roll, Pitch, Yaw의 방식을 사용하기에 변환이 필요하다. 데이터 변환 임무를 수행한 GCS는 Wi-Fi를 통해 드론의 제어보드로 입력 신호를 전송한다. 제어보드에서는 전송받은 신호를 PWM 방식으로 생성하여 출력된다. 출력된 신호는 SBUS 방식을 통해 짐벌 카메라에 입력되어 제어하게 된다. 스마트 글러브의 입력 신호는 짐벌 카메라에 출력까지 평균 0.093 s, 최대 0.099 s로 실시간 사용에 문제가 없음을 보였다.

The reduction methods of operator's radiation dose for portable dental X-ray machines

  • Cho, Jeong-Yeon;Han, Won-Jeong
    • Restorative Dentistry and Endodontics
    • /
    • 제37권3호
    • /
    • pp.160-164
    • /
    • 2012
  • Objectives: This study was aimed to investigate the methods to reduce operator's radiation dose when taking intraoral radiographs with portable dental X-ray machines. Materials and Methods: Two kinds of portable dental X-ray machines (DX3000, Dexcowin and Rextar, Posdion) were used. Operator's radiation dose was measured with an 1,800 cc ionization chamber (RadCal Corp.) at the hand level of X-ray tubehead and at the operator's chest and waist levels with and without the backscatter shield. The operator's radiation dose at the hand level was measured with and without lead gloves and with long and short cones. Results: The backscatter shield reduced operator's radiation dose at the hand level of X-ray tubehead to 23 - 32%, the lead gloves to 26 - 31%, and long cone to 48 - 52%. And the backscatter shield reduced operator's radiation dose at the operator's chest and waist levels to 0.1 - 37%. Conclusions: When portable dental X-ray systems are used, it is recommended to select X-ray machine attached with a backscatter shield and a long cone and to wear the lead gloves.

골프장갑의 착용실태 조사 및 기능성 향상을 위한 디자인 제안 (A Study on the Wearing Conditions of Golf Gloves and a Proposal for a Functional Glove Design)

  • 류현숙;최혜선;김은경
    • 대한가정학회지
    • /
    • 제42권6호
    • /
    • pp.89-101
    • /
    • 2004
  • The aim of this study is to investigate problems with both fit and abrasion of golf gloves through a survey of golf usage among golfers over the age of 30, as well as by analyzing the golf glove industry with an emphasis on the size system and marketing situation. In addition, this study aims to suggest the basic raw materials for improving the design of golf gloves through physical properties inspections. The results of the analyses support the following suggestions. First of all, dissatisfaction arose from improper measurement in glove length. The survey showed that most problems occur in the pinky finger, while only the length of the middle finger of the glove is recorded based on Korean Standard Anthropometries Measurement. Clearly, proper measurements of every finger need to be included in the system. Secondly, the survey results clearly indicated regions 7(palm area) and 3(second finger area) as the areas requiring reinforcement. While the method of patching another layer with the same material is commonly used in the current glove market, materials other than genuine leather are unable to complement the abrasion. This study suggests that another layer of refill type genuine leather, which scored best in the physical properties inspection, needs to be patched onto regions 7 and 3.

원위피판술을 시행한 환자의 손가락에 수술용 고무장갑을 이용한 간단한 조형법 (Simple Molding Method for Post-distant Flap Stated Finger by Using Surgical Rubber Gloves)

  • 김호길;최환준;김미선;신호성;탁민성
    • Archives of Plastic Surgery
    • /
    • 제33권2호
    • /
    • pp.263-267
    • /
    • 2006
  • In both cosmetic and functional aspects, loss of digital pulp is a common problem. Compound or composite defects of the hand and fingers with exposed denuded tendon, bone, joint, or neurovascular structures may require flap coverage. Most often these lesions can be repaired by using simple local flap, neurovascular flap, thenar flap, and cross-finger flap. But microvascular reconstruction is sometimes needed for large defects. But Authors do not recommend these procedures in case of severe crushing injuries involving multiple finger pulp losses because they have possibility of damage of the vascular network and infection. So we applied distant flaps such as chest flaps, groin flaps, abdominal flaps and etc. And then we applied surgical rubber gloves for remodeling the flap after cutaneous healing. We have acquired satisfactory results, after the simple molding method for distant flap finger by using surgical rubber gloves treatment.

한국 소방방수피복의 착용만족도 및 개선방안에 관한 조사연구 (A Study on the Wearing Comfort of Firefighter's Protective Clothing)

  • 정정숙;이연순
    • 대한가정학회지
    • /
    • 제37권12호
    • /
    • pp.59-67
    • /
    • 1999
  • This study analyzed firefighter's actual wearing condition of turnout gear The results are as fellows: 1. When a firefighter is employed, Korea applies only the minimum of firefighters stature and weight but America applies both the minimum and the maximum. The choice of size is highly related with stature more than chest circumference. 2. The satisfaction degree of thermal barrier is very low, 3%. They used rubber gloves rather than heatproof gloves. This is more serious in small country like 'up', 'myun' than in cities. For laundering, they used sprinkling method with firefighting hose. Firefigthers hoped that their clothes could be classified tv the seasons and fire places. 3. frefighter had high unsatisfaction with the movement of hands and leges in the aspect of movement adjustability, air permeability, weight, body temperature regulation, and breathing in the hygenic aspect, fire resistance, thermal resistance property, water proof, chemical reactivity and electrical conductivity. Thev were also unsatisfied with water proof boots and gloves. They were generally satisfied with helmets but firefighters over 90kg of weight were rather unsatisfied. 4. The satisfaction degree for physical fitness was very low and the items with which they were not satisfied depend on physical features. 5. To develop turnout gear, they wanted changes in design, material and size. Reflection tape need to be replaced with high quality products and they wanted the use of velcro and zipper in fastening system.

  • PDF

장갑의 치수규격 실태에 관한 연구 - KS와 ISO 치수체계를 중심으로 - (A Study on Actual Conditions of Glove Size Standards - Focused on KS and ISO Sizing System-)

  • 김은경;최혜선
    • 복식
    • /
    • 제54권6호
    • /
    • pp.77-90
    • /
    • 2004
  • The purpose of this study was to provide basic information requisite in the new sizing system for gloves. KS glove standards' size dimensions, size designation and labeling systems were analyzed. Also, KS glove standards' control sizes were compared to the anthropometric data of 824 Korean adults taken in the previous study. As well, the ISO hand size system was also compared to the anthropometric data of the previous study according to frequency tables of hand length and hand circumference. The size dimensions showed differences among KS standards and there was no size designation and labeling systems existed in KS standards. Among KS glove size systems, protective rubber gloves for radioactive contamination and surgical rubber gloves' size which followed ISO system were accurately indicate the hand size of the person a glove is intended to fit. ISO glove sizing system comprised the control dimensions of hand length and hand circumference. The coverage of ISO size A was 84.8% which was highest among ISO size A. B, C. And in hand circumference 178, 191, 203, 216mm showed the frequencies above 3% and in hand length 167, 175. 183, 191, 199mm showed the frequencies above 3%.

수술용 장갑의 천공률에 대한 연구 (Incidence and Risk Factors for Surgical Glove Perforation)

  • 유선주;임영신;김명숙
    • 임상간호연구
    • /
    • 제16권3호
    • /
    • pp.63-71
    • /
    • 2010
  • Purpose: This study was conducted to evaluate the incidence and risk factors for surgical glove perforation during operation. Methods: During the month of december 2008, a total of 1,400 pairs of surgical gloves used in major operations was collected in a tertiary hospital. All gloves were examined immediately after operation using the standardized water-leak method to detect any perforation. Incidence of the glove perforation was counted according to the type of operation, operation time, the number of involved personnel, perforation sites, and the manufacturing companies. Results: Out of 2,800 gloves examined, 312 perforations were detected comprising 11.1% of samples. In terms of the type of operation, the perforation incidence varied from 5% to 20%, and the perforation rates in CS (20%) and NS (18%) (p<.001) were significantly higher than those in other departments. The 1st assistant or scrub nurse got glove perforation more frequently than the 2nd assistant or operator (p<.001). Longer operation time was associated with higher incidence of perforation evidently (p<.001). In terms of the sites, the thumb and index finger were more frequently perforated than other sites (4.1% and 3.4% respectively) without any differences between left and right side. Conclusion: Risk factors for glove perforation including the department of operation, operation time, participating personnel, and location of perforation should be taken into account to improve surgical safety.

치매 환자용 안전 장갑 개발을 위한 손 형태 분석 (Analyzing Hand Geometry to Develop Safety Gloves for Dementia People)

  • 차수정
    • 패션비즈니스
    • /
    • 제27권3호
    • /
    • pp.19-34
    • /
    • 2023
  • The purpose of this study was to analyze the three-dimensional hand-related dimensions of elderly women aged 70 to 84 years and to characterize them to develop safety gloves for dementia patients. The 3D data from the 8th Human Size Survey of the National Institute of Standards and Technology, Size Korea, were analyzed using the SPSS 26.0 program. The straight thumb length was longer in elderly women aged 70-74 than in those aged 80-84. To analyze the hand type of elderly women, four factors were categorized: hand and finger horizontal factor, hand vertical factor, finger digit V thickness factor, and finger length factor. Elderly women's hand types were categorized as 'long hands and thin fingers', 'thick hands with long fingers', and 'short hands and thick little fingers'. Elderly women aged 70-74 years and 80-84 years were analyzed as having the most 'long hands and thin fingers' type, while older women aged 75-79 years were analyzed as having the most 'thick hands and long fingers' type. It is known that the fingers get thicker and the size of hands increase as age advances, but by the age 80, there is a change in the size of hands again. In future research, it would be worth expanding to other age groups to explore differences between age groups and to develop safety gloves for real-world dementia patients based on the hand types analyzed.