• Journal of Power Electronics
• /
• v.17 no.4
• /
• pp.983-990
• /
• 2017

This paper proposes a model predictive control based on the discrete Lyapunov function to improve the performance of power electronic converters. The proposed control technique, based on the finite control set model predictive control (FCS-MPC), defines a cost function for the control law which is determined under the Lyapunov stability theorem with a control error compensation. The steady state and dynamic performance of the proposed control strategy has been tested under a single phase AC/DC voltage source rectifier (S-VSR). Experimental results demonstrate that the proposed control strategy not only offers global stability and good robustness but also leads to a high quality sinusoidal current with a reasonably low total harmonic distortion (THD) and a fast dynamic response under linear loads.

• International Journal of Advanced Culture Technology
• /
• v.7 no.1
• /
• pp.122-127
• /
• 2019

The Conditional Reasoning Test for Aggression (CRT-A) is an implicit assessment for aggression. The CRT-A is known to be resistant to response distortion. We revisited LeBreton et al.'s (2007) studies on the faking issues of the CRT-A with the Korean population. We divided 488 Korean college students into three groups and asked them to take the CRT-A under different instructions. Results showed that Koreans were able to identify aggressive alternatives when the purpose of the test was fully disclosed, and the students were less likely to select aggressive alternatives if they were told that the CRT-A was a personality test.

• Journal of Biomedical Engineering Research
• /
• v.28 no.5
• /
• pp.601-608
• /
• 2007

2 Dimensional Gel Electrophoresis(2DGE) is an essentialmethodology for analysis on the expression of various proteins. For example, information for the location, mass, expression, size and shape of the proteins obtained by 2DGE can be used for diagnosis, prognosis and biological progress by comparison of patients with the normal persons. Protein spot matching for this purpose is comparative analysis of protein expression pattern for the 2DGE images generated under different conditions. However, visual analysis of protein spots which are more than several hundreds included in a 2DGE image requires long time and heavy effort. Furthermore, geometrical distortion makes the spot matching for the same protein harder. In this paper, an iterative algorithm is introduced for more efficient spot matching. Proposed method is first performing global matching step, which reduces the geometrical difference between the landmarks and the spot to be matched. Thus, movement for a spot is defined by a weighted sum of the movement of the landmark spots. Weight for the summation is defined by the inverse of the distance from the spots to the landmarks. This movement is iteratively performed until the total sum of the difference between the corresponding landmarks is larger than a pre-selected value. Due to local distortion generally occurred in 2DGE images, there are many regions in whichmany spot pairs are miss-matched. In the second stage, the same spot matching algorithm is applied to such local regions with the additional landmarks for those regions. In other words, the same method is applied with the expanded landmark set to which additional landmarks are added. Our proposed algorithm for spot matching empirically proved reliable analysis of protein separation image by producing higher accuracy.

• Journal of the Korean Geographical Society
• /
• v.49 no.3
• /
• pp.438-455
• /
• 2014

This study aims at providing a set of viable answers regarding the projection and cartographic scale of Daedongyeojido through a GIS-based planimetric accuracy analysis. Both global and local analyses were undertaken in the use of an analytical tool, MapAnalyst. The main results from the global analysis are threefold. First, the overall cartographic scale turned out to be between 1:158,000 and 1:162,000. Second, the rotation angles were between $2^{\circ}$ and $3^{\circ}$, and the equidistant cylindrical projection reported the smallest value. Third, in terms of position accuracy, the conformal cylindrical projection showed a best fit to the map. A local analysis was undertaken for the conformal cylindrical and equidistant azimuthal projections and its main results are threefold. First, the largest distortions in terms of the displacement vectors and distortion grid were found in the northern borderlands. Second, from the isoline maps of scales, it was acknowledged that local scales between 1:170,000 and 1:175,000 were found around the middle part of the Korean peninsula centered on Seoul. As away from the region to the north-south direction, increasingly larger scales were distributed, while the smallest ones were found in the western and eastern edges of the peninsula. Third, from the isoline maps of rotation, it was known that areas west of a northernmost city (Junggangjin) were substantially rotated to the west, while ones east of it to the east. For a more sophisticated analysis, some need to be done to have a larger set of control points, a better way of postulating the map projection, and a more advanced set of techniques for a local analysis.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.4
• /
• pp.683-690
• /
• 2018

In this paper, a new signal processing technique is proposed for calibrating gain, phase, delay offsets in array antenna based anti-jamming minimum variance distortionless response (MVDR) global-positioning-system (GPS) receivers. The proposed technique estimates gain, phase and delay offsets across the antennas, and compensates for the offsets based on the estimates. A pilot signal with good correlation characteristics is used for accurate estimation of the gain, phase and delay offsets. Based on the cross-correlation, the delay offset is first estimated and then gain/phase offsets are estimated. For fine delay offset estimation and compensation, an interpolation technique is used, and specifically, the discrete Fourier transform (DFT) is employed for the interpolation technique to reduce the computational complexity. The proposed technique is verified through computer simulation using MATLAB. According to the simulation results, the proposed technique can reduce the gain, phaes and delay offset to 0.01 dB, 0.05 degree, and 0.5 ns, respectively.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.6
• /
• pp.689-696
• /
• 2020

It is known through prior research that the crust of the Korean Peninsula moves southeast at an annual average of 3 cm/year. The 2011 Great East Japan Earthquake caused a great change in the crust of the Korean Peninsula. Since then, the frequency of earthquakes has increased on the Korean Peninsula. Therefore, by using NGII and IGS GNSS observation data of the recent 15 years, to analyze the trends of changes in the deformation of the Korean Peninsula before and after the outbreak of the Great East Japan Earthquake. Data processing utilized Bernese Software V5.2, a widely used scientific and technical software around the world. As a result, the global movement of the Korean peninsula differed by about 4mm and the direction of movement by about 10° compared to before the Great East Japan Earthquake. As for the internal distortion of the Korean Peninsula, the East-West expansion of the Korean peninsula's crust was observed during the Great East Japan Earthquake, but it is believed that it has not fully returned to the level before the Great East Japan Earthquake.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.9
• /
• pp.1123-1131
• /
• 2020

The quick-response (QR) code is a two-dimensional barcode which is widely being used. Due to several interesting features such as small code size, high error correction capabilities, easy code generation and reading process, the QR codes are used in many applications. Nowadays, a printed color QR code for offline applications is being studied to improve the information storage capacity. By multiplexing color information into the conventional black-white QR code, the storage capacity is increased, however, it is hard to extract the embedded information due to the color crosstalk and geometrical distortion. In this paper, to overcome these problems, a new type of QR code is designed based on the CMYK color model and the local spatial searching as well as the global spatial matching is introduced in the reading process. These results in the recognition rate increase. Through practical experiments, it is shown that the proposed algorithm can perform the bit recognition rate improvement of about 3% to 5%.

• Steel and Composite Structures
• /
• v.18 no.1
• /
• pp.273-288
• /
• 2015

As one of the most common failure types of arch bridges, stability is one of the critical aspects for the design of arch bridges. Using 3D finite element model in ABAQUS, this paper has studied the stability performance of an arch bridge with inclined arch ribs and hangers, and the analysis also took the effects of geometrical and material nonlinearity into account. The impact of local buckling and residual stress of steel plates on global stability and the applicability of fiber model in stability analysis for steel arch bridges were also investigated. The results demonstrate an excellent stability of the arch bridge because of the transverse constraint provided by transversely-inclined hangers. The distortion of cross section, local buckling and residual stress of ribs has an insignificant effect on the stability of the structure, and the accurate ultimate strength may be obtained from a fiber model analysis. This study also shows that the yielding of the arch ribs has a significant impact on the ultimate capacity of the structure, and the bearing capacity may also be approximately estimated by the initial yield strength of the arch rib.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.3
• /
• pp.828-832
• /
• 2012

We performed replica exchange molecular dynamics (REMD) simulations of the tripzip2 peptide (betahairpin) using the GB implicit and TI3P explicit solvation models. By comparing the resulting free energy surfaces of these two solvation model, we found that the GB solvation model produced a distorted free energy map, but the explicit solvation model yielded a reasonable free energy landscape with a precise location of the native structure in its global free energy minimum state. Our result showed that in particular, the GB solvation model failed to describe the tryptophan packing of trpzip2, leading to a distorted free energy landscape. When the GB solvation model is replaced with the explicit solvation model, the distortion of free energy shape disappears with the native-like structure in the lowest free energy minimum state and the experimentally observed tryptophan packing is precisely recovered. This finding indicates that the main source of this problem is due to artifact of the GB solvation model. Therefore, further efforts to refine this model are needed for better predictions of various aromatic side chain packing forms in proteins.

• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.4
• /
• pp.391-399
• /
• 2012

Multipath remains a dominant source of ranging errors in GNSS (Global Navigation Satellite System). And it is generally considered undesirable in the context of GNSS, since the reception of multipath can make significant distortion to the shape of the correlation function. In this paper, therefore, the model of the distorted shape of the correlation function is formulated and a MBME (Model-Based Multipath Estimation) technique for GPS L1/L5 receivers is proposed in order to estimate the parameters of the indirect signal such as the amplitude and the delay. The MBME technique does not require the any hardware modifications and it can estimate the parameters for both the short and long-delay multipath. Especially, it would be the very effective technique for the short-delay multipath if the L5 signal is available. Finally, the feasibility of the proposed technique has been confirmed by simulation results.