• Physical Therapy Korea
• /
• v.18 no.3
• /
• pp.59-66
• /
• 2011

The purpose of this study is to examine the activity ratios of global trunk muscles and local trunk muscles in relation to adjustments in the level of task difficulty while performing stability exercises in easily applied bridging lumbar stabilization exercise. Twenty healthy subjects performed bridging lumbar stabilization exercise while the level of task difficulty was plate was used in the same posture for all the exercises. EMG was used to examine the activity ratios of the global muscles and multifidus in relation to the level of task difficulty. Moreover, the activity ratios of the multifidus muscle, the erector spinae and the gluteus maximus muscle were measured. A one-way ANOVA with repeated measures was used, and a Bonferroni correction was conducted (${\alpha}$=.05). When the bridging lumbar stabilization exercise were performed at different difficulty levels, the activity of the multifidus muscle, which is a local muscle, was high in all three exercises. Also, compared to low intensity and intermediate intensity exercises, high intensity exercises showed more significant differences (${\alpha}$=.05). Among all the muscles, the multifidus showed the highest activity at intermediate intensity. Based on these results, we suggest that in the case of bridging lumbar stabilization exercise, low intensity or intermediate intensity exercises are more suitable and efficient for local muscle stabilization.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.48 no.3
• /
• pp.66-72
• /
• 2016

The applicability of rice husk fiber as a raw material for eco-friendly pulp mold was evaluated in this study. The higher demand of environmental friendly packaging material resulted in the more interest for the natural fiber based pulp mold. The rice husk which is an abundant agricultural byproduct in Asia could be defiberized by an alkaline digestion process. The changes in the pulp mold making process and the properties of pulp mold by the addition of the rice husk were investigated. The addition of rice husk fiber to the pulp mold made with OCC or UBKP resulted in the increase in drainage at the pulp mold forming process. In case of UBKP pulp mold, the addition of rice husk fiber increased the drying efficiency after pulp mold forming since the structure of pulp mold became more bulkier by the addition of the rice husk fiber. Those results showed the rice husk fiber could be applied to the pulp mold manufacturing as one of the eco-friendly natural fiber resources.

• Environmental and Resource Economics Review
• /
• v.9 no.2
• /
• pp.349-371
• /
• 2000

Data Envelopment Analysis model is a linear programming based technique for measuring the relative performance of organizational units where the presence of multiple inputs and outputs makes comparison difficult. A common measure for relative efficiency is weighted sum of outputs divided by weighted sum of inputs. DEA model allows each unit to adopt a set of weight that shows it in the most favorable light in comparison to the other unit. In this paper, we present the mathematical background and characteristics of DEA model, and give a short case study where we apply the DEA model to evaluate the relative efficiencies of 51 global electricity companies. The technical efficiency and scale efficiency are also to be investigated. Generating capacity and the number of employees are used for input data, and revenue, net profit and electricity sales are used for output data. We find that the companies with 100% relative efficiency are only 9 among 51 electricity companies. And the technical and scale efficiency of KEPCO is 98.7% and 78.89%, respectively. This means that the inefficiency of KEPCO is caused by the scale inefficiency. The analysis shows that the employees should be decreased by 15% at minimum to get the 100% efficiency. The result suggests that KEPCO needs the structural reform to improve the efficiency.

• The Journal of Asian Finance, Economics and Business
• /
• v.4 no.2
• /
• pp.55-68
• /
• 2017

This research is carried out to investigate the relationship between sustainability practices and performance in a financial sense for Malaysian Oil and Gas sector. Objectives include to study the state of sustainability disclosure among Malaysian oil and gas companies, to understand if companies that practiced sustainability had better performances to their financial bottom-line and to conduct a data analysis to understand the relationship between Environmental, social and governance performance [represented by the acronym ACSI] and financial performance. Sustainability performance is measured using ACSI checklist, which is an adaptation of the GRI 3.0 by Global reporting initiative while financial performance was measured on financial and profitability parameters namely EBITDA, EPS and PE ratio. Secondary data sources are used which were then converted into a rating scale to develop quantitative data. SPSS 21 is used for the analysis. The result shows that the majority of oil and gas companies in Malaysia had poor performance in terms of sustainability disclosure. On all three chosen profitability parameters, the companies that practiced sustainability were found to perform better than their counterparts that did not. Strong and significant relationship exists between sustainability practices and better financial performance.

• Computers and Concrete
• /
• v.8 no.3
• /
• pp.311-325
• /
• 2011

Nowadays, many engineers believe that hybrid structures with reinforced concrete central core walls and perimeter steel frames offer an economical method to develop the strength and stiffness required for seismic design. As a result, a variety of such structures have recently been applied in actual construction. However, the performance-based seismic design of such structures has not been investigated systematically. In the performance-based seismic design, quantifying the seismic damage of complete structures by damage indices is one of the fundamental issues. Four damage states and the final softening index at each state for high-rise hybrid structures are suggested firstly in this paper. Based on nonlinear dynamic analysis, the relation of the maximum inter-story drift, the main structural characteristics, and the final softening index is obtained. At the same time, the relation between the maximum inter-story drift and the maximum roof displacement over the height is also acquired. A double-variable index accounting for maximum deformation and cumulative energy is put forward based on the pushover analysis. Finally, a case study is conducted on a high-rise hybrid structure model tested on shaking table before to verify the suggested quantities of damage indices.

• Journal of Korean Society for Quality Management
• /
• v.37 no.1
• /
• pp.1-9
• /
• 2009

Data envelopment analysis(DEA) has proved to be powerful for benchmarking and has been widely used in a variety of settings since the advent of it. DEA can be used in identifying the best performing units to be benchmarked against as well as in providing actionable measure for improvement of a organization's performance. However, the selection of performance benchmarks is a matter of both technical production possibilities and organizational policy considerations, managerial preferences and external restrictions. In that regards, DEA has a limited value in benchmarking because it focuses on only technical production Possibilities. This research proposes a new perspective in using DEA and a frame-work for benchmarking to select benchmarks that are both feasible and desirable in terms of organizational context. To do this, the concept of local and global efficiency is newly proposed. To show how useful the suggested concept and framework are, a case study is addressed.

• International Commerce and Information Review
• /
• v.10 no.3
• /
• pp.291-313
• /
• 2008

As digital economy has dramatically evolved, new intellectual property rights protection has emerged as a pivotal issue which companies need to actively restxnid to. At the new digital era, the possession of new intellectual property rights determines the company values, and thus the protection of new intellectual property rights is getting more importance in the dimension of global competitiveness. The paper analyzes the changing aspect of digital economy and e-commerce paradigm, and explores the protection plan of new intellectual property rights focusing on e-commerce and digital goods transaction so that it can help the companies to strengthen their global competitiveness. After various case studies, we can find out that even though the companies have difficulty in settling out the strategies and policy due to the radical change of cycle in internet-centered digital economy, companies need to establish the systemic strategic plan to protect the new intellectual property rights stage by stage. Also, appropriate legal, institutional basis to protect the new intellectual property rights should be rearranged. The unsloved problems which relates with the protection of new intellectual property rights will be left for next research project.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2006.11a
• /
• pp.187-193
• /
• 2006

With the development of technology the Global Positioning System(GPS) measurement method which uses the artificial satellites to locate its position has been adopted in construction projects. Especially in civil engineering projects which have not any base points needed to measure their position they use the GPS measurement method has been put to practical use. But it was still difficult to use that method in building construction sites which require more accurate measurement data than the current GPS measurement method can provide. In this paper we introduce a new GPS measurement method adopted in Burj Dubai project which would be the tallest building in the world after its completion.

• Journal of Korea Water Resources Association
• /
• v.34 no.5
• /
• pp.543-549
• /
• 2001

This research estimated stream discharges indirectly by hydraulic channel routing. Only stage data from three stage stations and river cross section data were used to estimate Manning roughness coefficients and to compute stream discharges. When the discharges were estimated a stage-stage set of conditions was used for upstream-downstream boundary conditions. The research used the data from the upper Mississippi River. The hydraulic channel routings were performed by DWOPER (operational dynamic wave model). The global optimization program of SCE-UA was used to improve the roughness coefficient estimation module of the modified Newton-Raphson method in DWOPER. The results from SCE-US were better. For the case study of a flood, most estimated discharges except a few show errors within 10%.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.565-573
• /
• 2009

Even in case of new materials, materials that are not only harmless for the current global environment but also have high-performance and high-function are sought-after in consideration of the global environmental problems. Moreover, in construction areas where a large amount of cement and concrete are used, the establishment of the recycling technology or transformation into resources and energy materials are being put in place. And also, in a situation where the slow and relaxed city and rural life have a high priority, the need for cement and concrete as environmentally friendly new materials that best suit the emotions in human beings is on the rise and a new way to make good use of cement and concrete as new materials in construction technology should be sought. The recently introduced functional and environmentally friendly concrete is aimed at enhancing health through the adjustments of the body biorhythm using far-infrared. Minerals that contain a great amount of the elements with the frequent occurrence of the infrared among earth minerals and concrete are mixed to use structures or finishing materials, which will tackle the issues of smells, mold and corrosion.