본 연구는 품질증진제 처리가 산취(Chamaecereus silvestrii) '희망'의 모구품질과 표피 변화에 미치는 영향을 연구하였다. 생체중은 D-sorbitol 처리구보다 D-mannitol 처리구에서 감소율이 낮아 효과적이었다. Diniconazole 200ppm처리는 산취의 자구생육을 어느 정도(수치화) 억제하여 장기수송(50일)에 더 적합하였으며 자구색의 발현 어느 정도(수치화)에도 효과적이었다. 산취 모구의 표피구조는 비모란에 비해 하피 발달이 저조하고 어느 정도(수치화) 단층이며 세포벽도 얇아 어느 정도(수치화) 수송조건에 불리하였는데 생육의 억제효과가 높은 diniconazole 200ppm + D-mannitol 10,000ppm과 발색효과가 좋은 diniconazole 200ppm + wax 살포가 저장 중의 품질 유지에 적합하다고 판단된다.
The use of renewable energy sources is becoming increasingly necessary to minimize the problems derived from the global warming impacts caused by the utilization of fossil fuels as well as their limited supply and reservoir. Also, localized heavy rain has occurred in many areas. As a result, suspended wood waste is being inflow into the dam and the problem of waste disposal has occurred. It is a unique renewable and alternative source for the production of energy. The experiment using wood waste (dry weight 25.0g) was conducted for extraction sugars such as xylose, lactose and glucose. For the sugar extraction from wood waste, hydrolysis experiment using wood waste was conducted by two steps. First step was reacted with 72% sulfuric acid (24.0N and 37.5 ml) for 1hr at $30^{\circ}C$ and second step was reacted at $105^{\circ}C$ for one hour after adding 2.45times of hot water. Extracted sugar was used in the experiment of sugar consumption to estimate feasibility of ethanol production using yeast(P. Stipitis and S cerevisiae). As a result, sugar extracted from wood waste was effective consumed by yeast(P. Stipitis and S cerevisiae). The consumption rate by yeast was S. cerevisiae was faster than that of P. stipitis. It can be confirmed that resource as ethanol production using wood waste was available.
The global warming potential (GWP) of $CO_2$ refrigerant is 1/1300 times lower than that of R134a. Furthermore, the size and weight of the automotive heat pump system can decrease because $CO_2$ operates at high pressure with significantly higher discharge temperature and larger temperature change. The presented $CO_2$ heat pump system was designed for both cooling and heating in fuel cell vehicles. In this study, the performance characteristics of the heat pump system were analyzed for heating, and results for performance were provided for operating conditions when using recovered heat from the stack coolant. The performance of the heat pump system with heater core was compared with that of the conventional heating system with heater core and that of the heat pump system without heater core, and thus the heat pump system with heater core showed the best performance among the selected heating systems. On the other hand, the heating performance of two different types of coolant/air heat pump systems with heater core was compared each other at various coolant inlet temperatures. Furthermore, to use exhausted thermal energy through the radiator, experiments were carried out by changing the arrangement of a radiator and an outdoor evaporator, and quantified the heating effectiveness.
The agriculture and fishery share in the Korean GDP is continuously decreasing after 1960s. Furthermore the proportion of these industries in the GDP has diminished as low as 10 percent in recent years. However, the stockbreeding sector in these industries are considerably expanded. More than 50 percent of the whole farmhouses are involved in the livestock farming, and the stock farming portion is steadily increased in its size and scope. Thus, the mechanization and the automization of stockbreeding equipments are greatly required to reduce down production cost, as well as to win the competitiveness in the global market. From this aspect, developed in this paper is a stockbreeding management system (SMS) for dairy cattle, which can be used in small and medium sized dairy farms. First, the basic schema of the stockbreeding management system are addressed in view of stockbreeding management for individual dairy cattle. Electronic identification (EI) systems and sensory devices have changed stockbreeding management strategy from group stock control into individual stock control manner. The SMS receives stock body measurement data through the sensory devices such as weight, temperature, and milk conductivity meters. A common database then integrates those measuring data together so that the SMS can determine the appropriate solution on each stock's breeding such as feeding and milking. Thus, each stock can be supervised by a sophisticated SMS that provides the best solution to the stockbreeding throughout the stock's whole life-cycle. Secondly. six major submodules of the SMS, based on the EI and sensory devices, are proposed. They are individual stock management, disease management, health management, feeding management, milking management, and a propagation management submodule. Finally, a prototype system for the SMS is demonstrated. The system is developed using Delphi 2 client-server system run under the Windows 95 environment.
본 연구에서는 항공기 날개를 설계하기 위하여 공기역학과 구조해석을 통합한 다분야 설계최적화(MDO) 프레임웍을 구성하였다. 파라미터 모델링 기법을 사용하여 최적화 전 과정을 자동화하였다. 공력해석은 Fluent를 사용하였으며 이를 위한 격자는 CATIA의 파라미터 모델과 Gridgen을 사용하여 자동으로 생성되도록 하였다. 유한요소해석을 위한 격자는 MSC.Patran의 PCL 기능을 사용한 파라미터 방법으로 자동으로 생성되도록 하였다. 공력하중은 volume spline method를 사용하여 구조하중으로 변환시켰다. 최적화 방법은 전역해를 구하기 유리한 반응표면법을 사용하였다. 최적화 문제로 목적 함수는 날개의 무게의 최소화, 제약조건은 양항비와 날개의 변위로 정하였다. 그리고 종횡비, 테이퍼 비 및 후퇴각을 설계변수로 정의하였다. 최적화 시험 결과는 본 MDO 프레임웍이 성공적으로 구성되었음을 보여주었다.
Ti alloys are extensively used in high-technology application because of their strength, oxidation resistance at high temperature. However, Ti alloys tend to be classified very difficult to cut material. In this paper, The powder synthesis, spark plasma sintering (SPS), bulk material properties such as electrical conductivity and thermal conductivity are systematically examined on $Ti_2AlN$ and $Ti_2AlC$ materials having most light-weight and oxidation resistance among the MAX phases. The bulk samples mainly consisted of $Ti_2AlN$ and $Ti_2AlC$ materials with density close to theoretical value were synthesized by a SPS method. Machining characteristics such as machining time, surface quality are analyzed with measurement of voltage and current waveform according to machining condition of micro-electrical discharge machining with micro-channel shape.
2 Dimensional Gel Electrophoresis(2DGE) is an essentialmethodology for analysis on the expression of various proteins. For example, information for the location, mass, expression, size and shape of the proteins obtained by 2DGE can be used for diagnosis, prognosis and biological progress by comparison of patients with the normal persons. Protein spot matching for this purpose is comparative analysis of protein expression pattern for the 2DGE images generated under different conditions. However, visual analysis of protein spots which are more than several hundreds included in a 2DGE image requires long time and heavy effort. Furthermore, geometrical distortion makes the spot matching for the same protein harder. In this paper, an iterative algorithm is introduced for more efficient spot matching. Proposed method is first performing global matching step, which reduces the geometrical difference between the landmarks and the spot to be matched. Thus, movement for a spot is defined by a weighted sum of the movement of the landmark spots. Weight for the summation is defined by the inverse of the distance from the spots to the landmarks. This movement is iteratively performed until the total sum of the difference between the corresponding landmarks is larger than a pre-selected value. Due to local distortion generally occurred in 2DGE images, there are many regions in whichmany spot pairs are miss-matched. In the second stage, the same spot matching algorithm is applied to such local regions with the additional landmarks for those regions. In other words, the same method is applied with the expanded landmark set to which additional landmarks are added. Our proposed algorithm for spot matching empirically proved reliable analysis of protein separation image by producing higher accuracy.
BACKGROUND/OBJECTIVES: Obesity is a global health problem of significant importance which increases mortality. In place of anti-obesity drugs, natural products are being developed as alternative therapeutic materials. In this study, we investigated the effect of Brassica juncea L. leaf extract (BLE) on fat deposition and lipid profiles in high-fat, high-cholesterol diet (HFC)-induced obese rats. MATERIALS/METHODS: Male Sprague-Dawley rats were divided into four groups (n = 8 per group) according to diet: normal diet group (ND), high-fat/high-cholesterol diet group (HFC), HFC with 3% BLE diet group (HFC-A1), and HFC with 5% BLE diet group (HFC-A2). Each group was fed for 6 weeks. Rat body and adipose tissue weights, serum biochemical parameters, and tissue lipid contents were determined. The expression levels of mRNA and proteins involved in lipid and cholesterol metabolism were determined by reverse transcription polymerase chain reaction and western blot analysis, respectively. RESULTS: The HFC-A2 group showed significantly lower body weight gain and food efficiency ratio than the HFC group. BLE supplementation caused mesenteric, epididymal, and total adipose tissue weights to decrease. The serum levels of triglyceride, total cholesterol, and low-density lipoprotein cholesterol were significantly reduced, and high-density lipoprotein cholesterol was significantly increased in rats fed BLE. These results were related to lower glucose-6-phosphate dehydrogenase, acetyl-coA carboxylase, and fatty acid synthase mRNA expression, and to higher expression of the cholesterol $7{\alpha}$-hydroxylase and low density lipoprotein-receptor, as well as increased protein levels of peroxisome proliferator-activated receptor ${\alpha}$. Histological analysis of the liver revealed decreased lipid droplets in HFC rats treated with BLE. CONCLUSIONS: Supplementation of HFC with 3% or 5% BLE inhibited body fat accumulation, improved lipid profiles, and modulated lipogenesis- and cholesterol metabolism-related gene and protein expression.
BLUs are major component in LCD industry which occupies 90% or more of FPD market worldwide and BLU market is expected to be expanded continuously according to the trend of miniaturization, slimness, low power consumption and low weight. The larger the BLU market scale, the more important standardization of performance evaluation techniques to clearly prescribe the product specification. Currently the government is promoting the establishment of related laws and coincidence with international standards to cope with agreements such as WTO/TBT, but the nongovernmental standardization activities are not enough to be actualized. Furthermore, BLU related components such as CCFL, EEFL, inverter and reflector are already developed for localization to substitute imports with home products but collective standardization, national standardization, and international standardization are still not done. So, performance specifications and evaluation methods for normal fluorescent lamps or industrial lamps are being adopted and used as national standards and safety certification standards instead. Making these standards enables to prepare a chance to penetrate into global market and to promote world best products. Also, by making this collective standard, it provides chances to take part in international standardization activities, to protect domestic industries and technologies, to obtain the trend of advanced technologies, and to be predominant over other countries. That is to say, CCFL standardization helps raise 21st century national strategic technology policy and go ahead of globalization of core technologies.
오늘날 글로벌한 경쟁에서 고객의 만족도를 유지하고 생산성과 효율을 높이기 위해서 대량맞춤(mass customization)이 많은 선도기업에서 채택되고 있다. 대량맞춤은 제품가족과 제품 플랫폼에 근거하여 기업으로 하여금 새로운 제품을 유연하고 효율적이며 고객 요구에 신속히 대응하는 것을 용이하게 한다. 따라서 제품 플랫폼에 기반한 제품가족 전략이 대량맞춤을 실현화하는데 적절한 방법이다. 제품가족이란 다양한 시장의 요구를 충족하기 위해서 공통의 특성, 구성부품, 서브 시스템을 공유하는 일련의 유사한 제품군으로 정의된다. 이 연구의 목표는 제품가족 설계 전략을 이용하여 고객의 요구를 충족시키는 제품의 구성부품간의 우선순위를 찾아내고자 하는 것이다. 신 제품 개발을 위한 의사결정 과정은 피드백을 가지는 다 변량 의사결정 모형을 필요로 한다. 이를 위해서 분석적 네트워크 과정(analytic network process) 방법을 이용하여 의사결정 모델과 절차를 수립하였다. 구현을 위해서 제품가족 모델에 적합한 소형 PC인 넷북 제품을 선정하고, 각 제품가족에 대한 구성부품에 대하여 제안된 방법에 따라서 우선순위를 도출하였다. 구현결과를 QFD 모델을 이용하여 고객요구사항과 구성부품간의 관계를 분석하고 평가하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.