• Journal of Sensor Science and Technology
• /
• v.22 no.5
• /
• pp.309-314
• /
• 2013

Glass micropipettes are widely used for drug injection in neurological studies. To enable these devices to monitor neural activity simultaneously with drug injection, an electrode such as Ag/AgCl must be located near or inserted into the glass micropipette to detect electrical signals in vivo. Here, we report carbon-nanotube-modified glass micropipettes (CNGs), which have excellent electrochemical properties such as low impedance and large electrochemical surface area suited for neural recording. In addition, using a standard pressure pump, CNGs can deliver drugs to the target region without bending. Because they are based on standard glass micropipettes, CNGs can readily be applied to traditional equipment, creating opportunities to monitor precisely the drug-injected area.

• Korean Journal of Animal Reproduction
• /
• v.23 no.4
• /
• pp.313-321
• /
• 1999

The purpose of these study was to investigate the use of a glass micropipette (GMP) as a vessel for vitrification of bovine IVP blastocysts, to compare the post-thaw survival rates of bovine blastocysts frozen in GMP with those frozen in OPS that have been previously investigated, and to improve the hatching rate following vitrification with GMP method. The GMP vessel permits higher freezing and warming rate than the OPS due to the higher heat conductivity of the glass and lower mass of the solution that contains the embryos. Groups of three bovine IVP blastocysts were sequentially placed into vitrification solution before being loaded into either the OPS or GMP vessels and immersed into L$N_2$within 20 to 25 sec. Post-thaw blastocysts were serially washed in 0.25 and 0.15 M sucrose in HM and TCM-199 for each 5 min, respectively, and then cultured in TCM 199 supplemented with 10% FCS for 24 h. The rate of blastocyst re-expanding did not significantly different for OPS (75.9%) and GMP (80.0%) methods (P＞0.05). The hatching rates in OPS (34.1%) and GMP (37.5%) methods were significantly lower than that in control group (54.3%) (P＞0.05). In addition, the rate of blastocyst re-expanding was significantly lower if blastocysts were vitrified in the wide portion of the micropipette rather than the narrow portion of the micropipette (83.3 vs 56.7%) (P＞0.05), even though three blastocysts were loaded per vessel. The hatching rate in 0.05% pronase solution treatment for 30, 60 and 90 see (45.9, 54.7 and 57.5%) were significantly higher than that in control (35.0%), even though there was not significantly different between 30 see and control. These results indicate that both vitrification vessels can provide high survival rates of bovine IVP blastocysts. However, the GMP vessel has the advantage over the OPS, in that the former does not need a cap to protect the vessel from floating after immersion in L$N_2$. The location of the embryos (narrow or wide portion of immersion) were considered to be limiting factors to the viability of bovine IVP embryos. The exposing in 0.05% pronase solution for 60 or 90 see can increase hatching rates of post-thaw bovine IVP blastocysts.

• Proceedings of the Korean Society of Embryo Transfer Conference
• /
• 2002.11a
• /
• pp.83-83
• /
• 2002

The purpose of this study was to investigate the warming temperature and exposed time on the post-thaw survival rate and viability of bovine blastocyst cryopreserved by GMP vitrification. Groups of three bovine IVP blastocysts were sequentially placed into vitrification solution before being loaded into the GMP straws and immersed into LN$_2$within 20 to 25 sec. The warming rate was increased 2 times of warming temperature for improvement of post-thaw survival rates. The frozen embryos were warmed either at 35 or 70$^{\circ}C$ for 1 or 2 sec and then diluted in sucrose solution. Post-thaw blastocysts were serially washed in 0.25 and 0.15 M sucrose in holding medium (HM: TCM199 supplemented with 10% FCS) and TCM-199 for each 5 min, respectively, and then cultured in TCM199 for 24 h. The rate of re-expanded blastocyst was significantly different fer 35 and 70$^{\circ}C$ warming temporature (76.4 vs. 89.3%; P<0.05). The rate of re-expanded blastocyst at 70$^{\circ}C$ for 1 sec was significantly higher than that for 2 sec (91.1 vs. 70.9%; P<0.05). The number of nuclei counted were significantly different among control, 35 and 70$^{\circ}C$ (121${\pm}$8.5 vs. 104${\pm}$11.7 vs. 114${\pm}$10.3; P<0.05). These results indicated that the increasing of warming rate can provide high survival rates of bovine IVP blastocysts. Especially, the best viability of post-thaw blastocyst could be thaw at 70$^{\circ}C$ for 1 sec. The warming temperature and exposed time far warming was considered to be limiting factors to the viability of bovine IVP embryos. he purpose of this study was to investigate the warming temperature and expose.

• Journal of the Korean Society of Visualization
• /
• v.9 no.2
• /
• pp.21-26
• /
• 2011

Hydrodynamic focusing technique to generate focused flow has been used for flow cytometry in microfluidic devices. However, devices with circular capillary tubes made of glass are not suitable for flow visualization or optical signal detection because the rays of light are distorted at the curved interface. We devised a new acrylic chamber assembled with a pulled micropipette and a rectangular microchannel made of glass. This new channel geometry enabled us to visualize the three-dimensional (3D) flow characteristics with confocal imaging technique. We analyzed the 3D hydrodynamic focusing in a circular capillary tube and a rectangular microchannel over a practical range of flow rates, viscosities and pressure drops.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.10 s.253
• /
• pp.1261-1268
• /
• 2006

This paper reports low-cost microreactor $(10{\mu}{\ell})$ biochip for the DNA PCR (polymerase chain reaction). The microbiochip $(20mm{\times}28mm)$ is a hybrid type which is composed of PDMS (polydimethylsiloxane) layer with serpentine micochannel $(360{\mu}m{\times}100{\mu}m)$ chamber and glass substrate integrated with microheater and thermal microsensor. Undesirable bubble is usually created during sample loading to PMDS-based microchip because of hydrophobic chip surface. Created bubbles interrupt stable biochemical reaction. We designed improved microreactor chamber using microfluidic simulation. The designed reactor has a coner-rounded serpentine channel architecture, which enables stable injection into hydrophobic surface using micropipette only. Reactor temperature needed to PCR reaction is controlled within ${\pm}0.5^{\circ}C$ by PID controller of LabVIEW software. It is experimentally confirmed that SRY gene PCR by the fabricated microreactor chip is performed for less than 54 min.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.53 no.5
• /
• pp.286-292
• /
• 2004

In this study, an integrated microelectrode array was fabricated on glass slide using microfabrication technology. Probe DNAs consisting of mercaptohexyl moiety at their 5-end were spotted on the gold electrode using micropipette or DNA arrayer utilizing the affinity between gold and sulfur. Cyclic voltammetry in 5mM ferricyanide/ferrocyanide solution at 100 ㎷/s confirmed the immobilization of probe DNA on the gold electrodes. When several DNAs were detected electrochemically, there was a difference between target DNA and control DNA in the anodic peak current values. It was derived from specific binding of Hoechst 33258 to the double stranded DNA due to hybridization of target DNA. It suggested that this DNA chip could recognize the sequence specific genes. It suggested that multichannel electrochemical DNA microarray is useful to develop a portable device for clinical gene diagnostic System.

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1324-1326
• /
• 2006

In this study, an integrated microelectrode array was fabricated on glass slide using microfabrication technology. Probe DNAs consisting of mercaptohexyl moiety at their 5-end were spotted on the gold electrode using micropipette or DNA arrayer utilizing the affinity between gold and sulfur. Cyclic voltammetry in 5mM ferricyanide/ferrocyanide solution at 100 mV/s confirmed the immobilization of probe DNA on the gold electrodes. When several DNAs were detected electrochemically, there was a difference between target DNA and control DNA in the anodic peak current values. It was derived from specific binding of Hoechst 33258 to the double stranded DNA due to hybridization of target DNA. It suggested that this DNA chip could recognize the sequence specific genes. It suggested that multichannel electrochemical DNA microarray is useful to develop a portable device for clinical gene diagnostic system.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.11
• /
• pp.1133-1137
• /
• 2011

A novel technique for the fabrication of a glass micropipette-based thermal sensor was developed utilizing inexpensive thermocouple materials. Thermal fluctuation with a resolution of ${\pm}0.002$ K was measured using the fabricated thermal probe. The sensors comprise unleaded low-melting point solder alloy (Sn) as a core metal inside a borosilicate glass pipette coated with a thin film of Ni, creating a thermocouple junction at the tip. The sensor was calibrated using a thermally insulated calibration chamber, the temperature of which can be controlled with a precision of ${\pm}0.1$ K and the thermoelectric power (Seebeck coefficient) of the sensor was recorded from 8.46 to $8.86{\mu}V$/K. The sensor we have produced is both cost-effective and reliable for thermal conductivity measurements of micro-electromechanical systems (MEMS) and biological temperature sensing at the micron level.

• Proceedings of the Korean Society of Embryo Transfer Conference
• /
• 2002.11a
• /
• pp.84-84
• /
• 2002

The advantages of the OPS techniques(Vajta G et al, Mol Reprod Dev 51: 53-58,1998) give 1) high survival rates of various types of eggs, 2) quick and simple process, 3) inexpensive equipment and reduced chilling injury. The efficiency of IVM/IVF technique in the porcine species is relatively lower than that obtained in other species such as ruminants. Two experiments were designed to investigate the effects of in-vitro fertilization of porcine oocytes matures using different OPS protocol for chilling and warming of vitrification. Porcine oocytes from ovaries collected at abattoir were matured for 44 hours in TCM199 Earle's salt supplemental with pyruvate, pff, L-cysteine, hormones and gentamycin. Oocytes were denuded and fertilized with frozen boar semen by common method. Porcine embryos produced routinely by in-vitro culture system of NCSU23 medium. The vitrification and the warming were conducted by OPS method with the glass micropipette instead of straw vessels and modified the protocol of G.Vajta(1999). In Exp 1, Chilling/Warming:Holding Medium(HM)+EG+DMSO/HM +sucrose Medium(SM) at 39$^{\circ}C$ warm stage. In Exp 2, : PBS+CS+EG+Ficoll+ Trehalose/PBS+Trehalose at 25$^{\circ}C$ stage. Filling, freezing, packing, thawing out and further culturing were performed to follow the basic protocol of G Vajta. During IVM-lVC and post-warming, fertilization parameter and developmental potential were compared to and statistically analysed. It was not significantly different from Exp 1 and Exp 2 but 25$^{\circ}C$ of stage was slightly higher on the morula/blastocyst forming rate and better atmosphere for worker than that at 39$^{\circ}C$ stage.

• Journal of Embryo Transfer
• /
• v.17 no.2
• /
• pp.129-136
• /
• 2002

The purpose of this study was to investigate the comparison of viability of bovine blastocysts following glass micropipette (GMP) vitrification and the possibility of production of Korean Native Cow ("Hanwoo,"Bos taurus coreanae) following embryo transfer into Mongolia cows (Bos taurus mongolian). The embryos of Korean Native Cow were produced by IVMFC or superovulation methods in Korea, cryopreserved by GMP vitrification, and subsequently trans-ported to Mongolia. The recipient cows were synchronized using a CIDR plus and prostaglandin $F_2\alpha$($PGF_2\alpha$) treatment. To produce in vivo embryos, seven cows were superovulated using FSH and PGF$_2$／sub $\alpha$／ treatment. A total of 64 blastocysts ( $9.1\pm2.94$ per cow) were collected. In vitro embryos were produced using a defined culture system which cleaved in 80.1％ ova (174／217), and developed to blastocyst stage embryos of 40.8％ (71／174). The post-thaw survival rate of in vivo blastocysts (93.7％; 45／48) was significantly higher than that of in vitro blastocysts (82.5％; 52／63, P＜0.05). Embryo transfer was carried out using 8 Mongolian recipient cows and 2 post-thaw blastocysts per recipient. Five of 8 recipients were found pregnant at Day 60 but one abortion occurred by Day 240. Two of offspring were produced from the Mongolian cows at 275 days after embryo transfer. These results indicated that a GMP vitrification method could be used as a cryopreservation technique for in vivo or in vitro bovine blastocysts and produced effectively a Korean Native Cow following embryo transfer into a Mongolian recipient cow.