• Transactions on Electrical and Electronic Materials
• /
• v.1 no.4
• /
• pp.20-24
• /
• 2000

This study aimed to develop ITO(Indium Tim Oxide) tin films ablation with a pulsed type KrF excimer laser required for the electrode patterning application in flat panel display into small geometry on a large substrate are. The threshold fluence for ablating ITO on glass substrate is about 0.1 J/㎠. And its value is much smaller than that using 3 .sup rd/ harmonic Nd:YAG laser. Through the optical microscope measurement the surface color of the ablated ITO is changed into dark brown due to increase of surface roughness and transformation of chemical composition by the laser light. The laser-irradiated regions were all found to be electrically isolating from the original surroundings. The XPS analysis showed that the relative surface concentration of Sn and In was essentially unchanged (In:Sn=5:1)after irradiating the KrF excimer laser. Using Al foil made by 2$\^$nd/ harmonic Na:YAG laser, the various ITO patterning is carried out.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11a
• /
• pp.341-345
• /
• 2001

In this study, nano-sized powders of SiO$_2$-0∼15mo1%B$_2$O$_3$ composition were prepared by sol-gel processing method using TEOS(Tetra ethyl ortho silicate) and H$_3$BO$_3$ solution. The powders were tape-cast on High silicate glass sheet(HSG) substrate and sintered to form a layer of undercladding for the planar light wave module. During the sol-gel processing, H$_2$O/Si mole ratio were varied to modify the size of the powders in a range from 600 to 75nm. The dispersion of the powder was modified by changing the pH of the slurry. Sintering temperature of the tape was observed to decrease with the size of the powder and the B$_2$O$_3$ content in the powder. When the silica powders of 75∼125nm in diameter containing 15mo1% B$_2$O$_3$ were used, 98 TD% was obtained at 1250$^{\circ}C$, which is approximately 300$^{\circ}C$ reduction in sintering temperature compared with micrometer-sized powders.

• Journal of Biomedical Engineering Research
• /
• v.15 no.2
• /
• pp.189-194
• /
• 1994

Effects of ${AI_2O_3}/{P_2O_5}$ ratio on the crystallization of a series of glasses with the nominal composition of 41.4wt % $SiO_2$, 35.0wt % CaO, 20.6wt % (${P_2O_5}$+${AI_2O_3}$) and 3.0wt% MgO were investigated with DTA, XRD and SEM. The major crystalline phases are apatite and anorthite. The glass transition temperature ($T_g$) and the softening point ($T_s$) are shifted to the upper temperature by increasing $AI_2O_3$ content. The temperature of apatite crystallization ($T_{p1}$) is increased by $AI_2O_3$ content, but the tempera¬ture of anorthite crystallization ($T_{p2}$) is not affected significantly. With increased of $AI_2O_3$, the apatite crystallization is decreased, but anorthite crystallization is increased.

• Transactions on Electrical and Electronic Materials
• /
• v.11 no.1
• /
• pp.33-36
• /
• 2010

$MgF_2$ is a current material used for optical applications in the ultraviolet and deep ultraviolet range. Process variables for manufacturing $MgF_2$ thin film were established in order to clarify the optimum conditions for the growth of the thin film, dependant upon the process conditions, and then by changing a number of the vapor deposition conditions, substrate temperatures, and heat treatment conditions, the structural and optical characteristics were measured. Then, optimum process variables were thus derived. Nevertheless, modern applications still require improvement in the optical and structural quality of the deposited layers. In the present work, in order to understand the composition and microstructure of $MgF_2$, single layers grown on a slide glass substrate using an Electron beam Evaporator (KV-660), were analyzed and compared. The surface substrate temperature, having an effect on the quality of the thin film, was changed from $200^{\circ}C$ to $350^{\circ}C$ at intervals of $50^{\circ}C$. The heat treatment temperature, which also has an effect on the thin film, was changed from $200^{\circ}C$ to $400^{\circ}C$ at intervals of $50^{\circ}C$. The physical properties of the thin film were investigated at various fabrication conditions, such as the substrate temperature, the heat treatment temperature, and the heat treatment time, by X-ray diffraction, and field emission-scanning electron microscopy.

• Journal of Surface Science and Engineering
• /
• v.52 no.4
• /
• pp.211-226
• /
• 2019

Optical thin films were deposited by using a reactive pulsed DC magnetron sputtering method with a high density plasma(HDP). In this study, the effect of sputtering process conditions on the microstructure and optical properties of $SiO_2$, $TiO_2$, $Nb_2O_5$ thin films was clarified. These thin films had flat and dense microstructure, stable stoichiometric composition at the optimal conditions of low working pressure, high pulsed DC power and RF power(HDP). Also, the refractive index of the $SiO_2$ thin films was almost constant, but the refractive indices of $TiO_2$ and $Nb_2O_5$ thin films were changed depending on the microstructure of these films. Antireflection films of $Air/SiO_2/Nb_2O_5/SiO_2/Nb_2O_5/SiO_2/Nb_2O_5/Glass$ structure designed by Macleod program were manufactured by our developed sputtering system. Transmittance and reflectance of the manufactured multilayer films showed outstanding value with the level of 95% and 0.3%, respectively, and also had excellent durability.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.22 no.1
• /
• pp.35-41
• /
• 2019

Ferrocene and ferrocene derivatives have been widely used as a burning rate catalyst for composite solid propellants. However, its tendency to migrate through the propellant grain and to crystallize at the surface changes the composition of propellant which results in unpredictable burning rate. To overcome the weakness of ferrocene catalyst, we designed a polymer containing ferrocene, poly(glycidyl azide-co-glycidyl ferrocenyl ether) (GAFP). GAFPs were synthesized from poly(epichlorohydrin-co-glycidyl ferrocenyl ether) (PEGF) which has ferrocenyl ethers in its pendant groups. The structures of GAFPs were confirmed by FT-IR, $^1H$ and $^{13}C$ NMR spectral analyses. Thermal properties of the GAFPs were evaluated using differential scanning calorimeter (DSC). As the contents of ferrocene increased, the glass transition temperature ($T_g$) of the GAFPs shifted to a higher temperature, and the decomposition temperature ($T_d$) decreased because the ferrocene worked as a burning rate catalyst.

• Journal of Applied Biological Chemistry
• /
• v.62 no.1
• /
• pp.51-56
• /
• 2019

Biofilms facilitate communication among microorganisms for nutrients and protect them from predators and harmful chemicals such as antibiotics and detergents. Biofilms can also act as cores for the development of clogs in many agricultural irrigation systems and in porous media. In this study, we deployed glass units at a depth of 20 m below the ground surface in the groundwater-surface water mixing zone, and retrieved them after 4 months to investigate the potential colonization of indigenous microbial community and possible mineral-microbe assemblages. We observed the periodic formation of microbial colonies by fluorescence dye staining and microscopy, and analyzed the composition of the microbial community in both the mineral-microbe aggregates and groundwater, by next generation sequencing of the 16S rRNA gene amplicons using MiSeq platform. During the course of incubation, we observed an increase in both the mineral-microbe aggregates and content of extracellular polymeric substances. Interestingly, the microbial community from the aggregates featured a high abundance of iron redox-related microorganisms such as Geobacter sp., Comamonadaceae sp., and Burkholderiales incertae sedis. Therefore, these microorganisms can potentially produce iron-minerals within the sediment-microbe-associated aggregates, and induce biofilm formation within the groundwater borehole and porous media.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.27 no.2
• /
• pp.85-90
• /
• 2021

The gamma irradiation was on to Poly(butylene sebacate-co-terephthalate) (PBSeT), Poly(butylene adipate-co-terephthalate) (PBAT), Poly(lactic acid) (PLA) and casting polypropylene (CPP) at dose levels from 0 to 50 kGy. The properties of gamma irradiated samples were analyzed using DSC, TGA, UTM and FT-IR spectra. The mechanical and thermal properties of PBSeT and PBAT after gamma irradiation were less affected than CPP. The tensile strength and elongation of PBSeT was not affected by gamma irradiation, while these of PBAT, PLA and CPP were significantly decreased at 50 kGy gamma-ray dose. The thermal stability of PBSeT, PBAT, PLA and CPP showed a similar tendency to tensile strength. The glass transition temperature(T_g) and melting temperature(T_m) of PBSeT and PBAT were not altered by increasing gamma-ray dose, while these of PLA and CPP decreased. The chemical composition of all samples was not modified by gamma irradiation, and it was confirmed by FT-IR spectra. Based on mechanical and thermal stability studies of gamma irradiation on bioplastics, tested biodegradable packaging materials showed a potential to be used in sterilization process up to 35 kGy.

• Korean Journal of Materials Research
• /
• v.32 no.6
• /
• pp.287-292
• /
• 2022

Magnesium-antimonide is a well-known zintl phase thermoelectric material with low band gap energy, earth-abundance and characteristic electron-crystal phonon-glass properties. The nominal composition Mg_3.8-xZn_xSb₂ (0.00 ≤ x ≤ 0.02) was synthesized by controlled melting and subsequent vacuum hot pressing method. To investigate phase development and surface morphology during the process, X-ray diffraction (XRD) and scanning electron microscopy (SEM) were carried out. It should be noted that an additional 16 at. % Mg must be added to the system to compensate for Mg loss during the melting process. This study evaluated the thermoelectric properties of the material in terms of Seebeck coefficient, electrical conductivity and thermal conductivity from the low to high temperature regime. The results demonstrated that substituting Zn at Mg sites increased electrical conductivity without significantly affecting the Seebeck coefficient. The maximal dimensionless figure of merit achieved was 0.30 for x = 0.01 at 855 K which is 30% greater than the intrinsic value. Electronic flow properties were also evaluated and discussed to explain the carrier transport mechanism involved in the thermoelectric properties of this alloy system.

• The Korean Journal of Food & Health Convergence
• /
• v.9 no.2
• /
• pp.19-24
• /
• 2023

In this study, we tried to compare and analyze the taste components of Korean Ganjang made by a conventional method on a small scale and aged for 3 years and brewed Ganjang produced by a large company. As a result of the study, a total of 22 types of free amino acids in liver were detected. The main amino acids of Korean Ganjang were glutamic acid, lysine, serine, citrulline, alanine, and leucine, then, the main amino acids of brewed Ganjang were leucine, glutamic acid, aspartic acid, valine, serine, alanine. The content of glutamic acid in the composition of free amino acid was 12133.69 mg/mL, more than twice as much as that of Korean Ganjang. The content of leucine (bitter taste) was 5933.37 mg/mL of brewed Ganjang, which was 2.9 to 7 times higher than that of Korean Ganjang. Overall, the content of glass amino acids with savory, sweet, and bitter flavors was found to be very high in brewed Ganjang (BGS) than in Korean Ganjang (KAS, KBS, and KCS). On the other hand, GABA was 456.43 mg/mL for Korean Ganjang KBS, 3.3 times higher than brewed Ganjang. Brewed Ganjang had higher glucose content, inorganic content, iron (Fe), organic acid lactic acid and acetic acid content than Korean Ganjang. Korean Ganjang was found to contain high saturated fatty acids, calcium (Ca), and sodium (Na).