• 한국광물학회지
• /
• 제25권2호
• /
• pp.63-76
• /
• 2012

타킬라이트는 현무암질 용암의 급랭에 의해 형성된 흑색의 현무암질 유리질암로서 울릉도 최 하부층 현무암질 집괴암 내에서 드물게 산출된다. 본 논문의 목적은 타킬라이트의 산출특징과 미세조직의 광물학적 특징을 규명하고, 울릉도 초기 화산활동의 의미를 밝히는데 있다. 이를 위하여 타킬라이트의 산상을 조사하고 편광현미경, XRD, EPMA, SEM을 이용하여 광물학적 연구를 수행하였다. 타킬라이트는 내수전, 도동 및 저동 해안산책로, 거북바위, 예림원 지역 현무암질 집괴암 내 염기성 암맥 주변부에서 산출된다. 타킬라이트의 폭은 수 cm 내지 10 cm까지 다양하다. 타킬라이트의 겉 표면은 치밀하고 매끈하나, 내부는 패각상 깨짐이 특징적이다. 타킬라이트의 기질부는 유리질과 같은 비정질로 구성되어 있으며, 미립질의 반정광물로는 흑운모, 아노소클레이즈, 새니딘, 사장석, 각섬석, 및 티탄철석 등이 소량으로 포함된다. 타킬라이트에서 특징적으로 발달하는 균열은 아원형, 타원형이 우세하며, 간혹 여러 다면체를 보이는데, 경계부가 구획되어 일종의 구상체나 덩어리를 이룬다. 조직과 광물조성의 특징으로 볼 때, 타킬라이트는 가수분해작용과 같은 후속 저온성 변질작용을 거의 받지 않았다. 타킬라이트의 산출특징은 울릉도 하부층인 현무암집괴암층의 대부분이 수중환경에 있었거나, 최소한 해수에 포화되어 있었음을 지시한다.

• 한국전통조경학회지
• /
• 제36권2호
• /
• pp.54-60
• /
• 2018

'디테일의 거장'이라고 불리는 이탈리아 디자이너 카를로 스카르파(Carlo Scarpa)는 당시 시대적 조류였던 모더니즘의 한계를 넘어 지역성과 역사성이 담긴 감성적이고 시적인 정원을 창조한 예술가로 평가받는다. 본 연구는 스카르파 정원작품 속 디테일의 표현기법, 재료사용, 상징성을 분석함으로써 그의 디자인 철학 및 접근방법, 현대 정원설계에 있어서의 시사점을 도출하고자 하였다. 문헌고찰 및 현장조사 방법을 통해 베니스 및 인근지역에 위치한 스카르파 정원 및 공원의 디테일을 분석한 결과는 다음과 같다. 첫째, 스카르파는 재료의 물성에 대한 깊은 이해를 바탕으로 다양한 재료의 병치, 대비, 혼합을 통해 전통과 현대가 조화된 풍부하고 흥미로운 정원공간을 연출하였다. 둘째, 재료의 연결과 병치에 있어서도 유리세공과 같은 수공예적인 기법이나 덧대기 등의 텍스타일 디자인 방법을 적용하여 섬세하고 세련된 정원 디테일을 구성하였다. 셋째, 지그라트 모티브나 기하학 등 자신만의 독특한 조형언어를 통해 단조롭고 삭막해 보일 수 있는 모더니즘 정원에 풍부하고 화려한 장식성을 부여하였으며, 물, 지형, 식재 등의 자연적 소재들을 통해 장소, 역사, 문화, 인간의 삶을 상징적으로 표현하였다. 공예가적인 장인정신을 바탕으로 섬세한 재료이용과 디테일을 통해 서술적이고 시적인 정원을 설계한 스카르파의 모더니즘 정원은 오늘날 전통재료 및 문화의 현대적 재해석 방법에 있어 많은 시사점을 준다.

• 한국실내디자인학회논문집
• /
• 제25권2호
• /
• pp.59-69
• /
• 2016

This study aimed to understand the importance of applying finishing materials into interior space, and to add meaning to the creation of functional space, associated interior finishing materials with brain science. To achieve this purpose, brainwave(EEG) experiment was conducted. The brainwave appearing when sensing the surface of interior finishing materials with hands was measured. The locations of the electrode were FP1, FP2, F3, F4, C3, C4, P3, P4, O1, O2, F7, F8, T3, T4, T5, T6, CZ, FZ, and PZ and in addition to these, AFZ was added. Eight(8) kinds of finishing materials: metallic material, film paper, lumbar, stone, glass, silk wallpaper, fabric, and paint were used to measure '${\alpha}$-wave against ${\beta}$ wave.' As a result, it was found that the most activated finishing material in term of relaxation was film paper, followed by metallic, glass, paint, fabric, stone, lumbar, and silk wallpaper. To explain in light of this, (1) '${\alpha}$-wave against ${\beta}$ wave' was the most activated at ch1-FP1 and ch2-FP2, and at ch17-AFZ and ch19-FZ, which indicated that metopic-prefrontal lobe showed the highest activation in relaxation. Film paper, among the finishing materials, showed the highest increase in relaxation. (2) In general, '${\alpha}$-wave against ${\beta}$ wave' relaxation was inhibited at ch13-T3 and ch14-T4, and at ch15-T5 and ch16-T6 and the arousal in the temporal lobe was prominent. Silk wallpaper, among the finishing materials, showed the highest arounsal effect. As a result of measuring the superficial touch on the silk wallpaper, which was regarded as the most rough material among the eight finishing materials, the arousal effect of ${\alpha}$-wave against ${\beta}$-wave, among the brainwave characteristics, was found to be the highest. (3) to judge from the scope of this experiment regarding the tactile sensation over the finishing materials, it is considered that the brainwave reaction sometimes appeared contrastive depending on whether the surface was smooth or rough and there also appeared a difference in relaxation and arousal reaction of the brainwave depending on whether the surface was hot or cold, but the sensation on the surface texture was often evaluated differently depending on who you were. For this reason, this study has some limitations.

• 한국세라믹학회지
• /
• 제32권2호
• /
• pp.171-182
• /
• 1995

Five eucryptite and ten spodumene compositional powders were syntehsized from three sillimanite group, two kaolin group, and five pyrophyllite group silicate minerals. Those powders were isotatically pressed and fired at 1200~135$0^{\circ}C$ for 2 hrs, and then the sintered bodies were characterized. Silicate minerals with molar ratio of Al2O3 to SiO2 correspond to those of eucryptite and spodumene are kaolin and pyrophyllite group silicate minerals, respectively. Sintering characteristics of eucryptite from kaolin group and spodumene from pyrophyllite group mineral were superior to those from other silicate minerals. Eucryptite sintered bodies with 95~97% relative densities and densified microstructures can be obtained using Hadong pink kaolin as starting materials by sintering over broad temperature zone(1250~135$0^{\circ}C$). The eucryptite sintered bodies which were fired at 130$0^{\circ}C$ for 2hrs, from Hadong pink kaolin had within 3.0wt% microstructural compositional variations compaired with stoichiometric compound, and had good negative thermal expansiion property with -3.55$\times$10-6/$^{\circ}C$ thermal expansion coefficient. Spodumene sintered bodies which were prepared from pyrophyllite group silicate minerals, had dense microstructures and high densities by densification through liquid phase sintering with enlarged temperature range. The specimens which were fired at 130$0^{\circ}C$ for 2 hrs from Gusipyrophillite, had dense microstructure with crystallines mainly, and low thermal expansion property with 0.62$\times$10-6/$^{\circ}C$ thermal expansion coefficient. The porous texture and residual glass phase in LAS system ceramics which were prepared from silicate minerals, tend to increase the thermal expansion properties of sintered bodies to positive direction.

• 한국식생활문화학회지
• /
• 제27권6호
• /
• pp.627-635
• /
• 2012

This study was conducted to investigate the preference for and recognition of Makgeolli by foreign students to determine its potential for export. From March 15 to 29, 2010, 300 students from four universities (Kyung-Hee University, Hankuk University of Foreign Studies, Yonsei University, Chung-Ang University) were surveyed and data from 287 subjects were used for subsequent analyses. The recognition of Makgeolli was as follows: 40.3% knew that Makgeolli's was fermented alcohol; 49.5% knew its proof; 85.7% knew that rice and wheat were the main ingredients of Makgeolli; 72.8% knew it was Korean traditional alcohol. The preference for Makgeolli's was as follows: flavor (3.46), color (3.43), aroma (3.30), texture (3.28), reverberation (3.36), shape of glass (3.51) and Korean bar (3.72), which were slightly high. However, hangover (3.02) and plastic bottle (3.08) had lower values than the other variables. Overall, participants were likely to recommend Makgeolli to others (Male 3.57, Female 3.72), but they did not think that it is a good ingredient for food (2.91). The opportunity for the globalization of Makgeolli appeared to be high (Male 3.57, Female 3.74). To improve the export of Makgoelli, respondents reported that a better marketing strategy (37%) and new type of bottle (42.8%) were needed.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2002년도 총회 및 춘계학술발표회
• /
• pp.66-69
• /
• 2002

In this work, cost effective venting is considered by comparing flow rates of 5$m\ell$/min, 10$m\ell$/min, and 20$m\ell$/min. Studies were performed on a soil artificially contaminated with diesel oil (the initial TPH(Total Petroleum Hydrocarbon) concentration of 7098mg/kg), and nutrient condition was C:N:P rate of 100:10:1. The soil has a sandy texture with pH of 6.8, 2.16 ~2.38% organic matter, a total porosity of 47~52% and field capacity 16.2~ 17.2%. The column experiments was made of glass column of 60cm length and 10cm I.D. at controlled temperature of 2$0^{\circ}C$($\pm$2.5$^{\circ}C$). The efficiency of continuous flow rate of 5, 10 and 20$m\ell$/min resulted in separately 61.3%, 58.1%, and 55% reduction of initial TPH concentration(7098mg/kg). Hydrocarbon utilizing microbial count and dehydrogenase activity in air flow of 5$m\ell$/min were higher than those of the others. The first order degradation rate of n-alkanes ranging from C10 to C28 was higher than that of pristane and phytane as isoprenoids. The $C_{17}$/pristane and $C_{18}$phytane ratios for monitoring the degree of biodegradation were useful only during the early stages of oil degradation. Degradation contributed from about 89% to 93% of TPH removal. Volatilization loss of diesel oil in contaminated soil was about 7% to 11%, which was significantly small compared to degradation.n.

• 한국광물학회지
• /
• 제16권2호
• /
• pp.181-189
• /
• 2003

킹죠지섬에 분포하는 빙하쇄설물의 화학적 풍화작용의 유무를 탐색한 결과, 다양한 풍화조직들과 이차광물들이 관찰되었다. 지표에 노출된 안산현무암질 응회암 각력에는 방해석이 선택적으로 용해되어 형성된 풍화테들이 형성되어 있다. 풍성화산유리의 가장자리에는 Al, Fe, Ti가 상대적으로 농집된 매우 얇은 용탈층이 존재하며, 앨로패인과 철산화물 등으로 구성되어 있다. 화강섬록암 지역의 흑운모는 질석과 흑운모-질석 혼합층으로 변질되었으며 드물게 아주 미량의 캐올리나이트나 깁사이트가 생성되었다. 열수변질대 지역의 황철석은 산화철로 풍화되었으며, 주변의 녹니석은 부분적으로 팽윤성광물로 풍화되었다. 그러나 사장석과 K장석 등은 거의 변질되지 않았다. 바톤반도의 빙하쇄설물은 미약하나마 화학적 풍화작용을 받아 앨로패인과 산화철 등의 이차광물이 생성되고 있으나, 킹죠지섬 주변 해양 퇴적물에 풍부한 스멕타이트의 대량 생성은 관찰되지 않았다.

• 한국재료학회지
• /
• 제26권4호
• /
• pp.207-211
• /
• 2016

Ti films were deposited on glass substrates under various preparation conditions in a chamber of two-facing-target type dc sputtering; after deposition, the electric resistivity values were measured using a conventional four-probe method. Crystallographic orientations and microstructures, including the texture and columnar structure, were also investigated for the Ti films. The morphological features, including the columnar structures and surface roughness, are well explained on the basis of Thornton's zone model. The electric resistivity and the thermal coefficient of the resistivity vary with the sputtering gas pressure. The minimum value of resistivity was around 0.4 Pa for both the $0.5{\mu}m$ and $3.0{\mu}m$ thick films; the apparent tendencies are almost the same for the two films, with a small difference in resistivity because of the different film thicknesses. The films deposited at high gas pressures show higher resistivities. The maximum of TCR is also around 0.4 Pa, which is the same as that obtained from the relationship between the resistivity and the gas pressure. The lattice spacing also decreases with increasing sputtering gas pressure for both the $0.5{\mu}m$ and $3.0{\mu}m$ thick films. Because they are strongly related to the sputtering gas pressures for Ti films that have a crystallographic anisotropy that is different from cubic symmetry, these changes are well explained on the basis of the film microstructures. It is shown that resistivity measurement can serve as a promising monitor for microstructures in sputtered Ti films.

• 한국분말재료학회지
• /
• 제9권6호
• /
• pp.381-393
• /
• 2002

Recent developments in nanocrystalline and nanocomposite rare earth-transition metal magnets are reviewed and emphasis is placed on research work at IFW Dresden. Principal synthesis methods include high energy ball milling, melt spinning, mold casting and hydrogen assisted methods such as reactive milling and hydrogenation-disproportionation-desorption-recombination. These techniques are applied to NdFeB-, PrFeB- and SmCo-type systems with the aim to produce high remanence magnets with high coercivity. Concepts of maximizing the energy density in nanostructured magnets by either inducing a texture via anisotropic HDDR or hot deformation or enhancing the remanence via magnetic exchange coupling are evaluated. With respect to high temperature applications melt spun $Sm(Co_{0.74}Fe_{0.1}Cu_{0.12}Zr_{0.04})_{7.5}$ ribbons were prepared, which showed coercivities of up to 0.53 T at 50$0^{\circ}C$. Partially amorphous $Nd_{60}Fe_xCo_{30-x}Al_{10}(0{\leq}x{\leq}30)$ alloys were prepared by copper mold casting. The effect of transition metal content on the glass-forming ability and the magnetic properties was investigated. The $Nd_{60}Co_{30}Al_{10}$ alloy exhibits an amorphous structure shown by the corresponding diffraction pattern. A small substitution of Co by 2.5 at.% Fe results In the formation of Fe-rich crystallites embedded in the Nd-rich amorphous matrix. The Fe-rich crystallites show hard magnetic behaviour at room temperature with a coercivity value of about 0.4 T, relatively low saturation magnetization and a Curie temperature of 500 K.

• 대한치과보철학회지
• /
• 제45권4호
• /
• pp.407-418
• /
• 2007

Purpose: The objective of this study was to evaluate the effects of hydrofluoric acid concentration & etching time on the shear bond strength between IPS Empress 2 ceramic and resin cement. Material and methods: Thirty three rectangular shape ceramic specimens($20{\times}12{\times}5mm$ size, IPS Empress 2 core materials) were used for this study. The ceramic specimens divided into ten experimental groups with three specimens in each group and were etched with hydrofluoric acid(4%, 9%) according to different etching times(30s, 60s, 90s, 120s, 180s). Etched surfaces of ceramic specimens were bonded with resin cement(Rely X Unicorn) using acrylic glass tube. All cemented specimens were tested under shear loading until fracture on universal testing machine at a crosshead speed of 0.5mm/min and the maximum load at fracture(kg) was recorded. Collected shear bond strength data were analyzed with one way ANOVA and Duncan tests. All etched ceramic surfaces were examined morphologically using SEM(scanning electron microscopy). Results: Shear bond strength of etching group$(35.89{\sim}68.01MPa)$ had four to seven times greater than no-etching group$(9.53{\pm}2.29MPa)$. The ceramic specimen etched with 4% hydrofluoric acid for 60s showed the maximum shear bond strength$(68.01{\pm}11.78MPa)$. Ceramic surface etched with 4% hydrofluoric acid for 60s showed most retentive surface texture. Conclusion: It is considered that 60s etching with 4% hydrofluoric acid is optimal etching methods for IPS Empress 2 ceramic bonding.