• Journal of the Korean Society of Industry Convergence
• /
• v.9 no.1
• /
• pp.45-50
• /
• 2006

In order to analyse the properties of the fiber-adhesive that was used as Flocking process we synthesized quaterpolymer with the variation of the types of monomer ratio by emulsion polymerization. We characterized the properties of this adhesive: Differential Scanning Calorimeter(DSC), Thermogravimetry Analysis(TGA), Raman spectroscopy. The polymer was synthesized by changing the using amount of 2-EHAM, and then we investigated the characteristics of glass transition temperature(Tg), melting temperature(Tm), thermal stability and hydroxyl group respectively. The optimum monomer composition was 36.84% EAM, 15.79% MAM, 42.1% 2-EHAM and 5.26% AAc.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.4
• /
• pp.289-296
• /
• 2018

In this study, we evaluated the feasibility and performance of LCD waste glass as a replacement for cement by using LCD waste glass powder which is generated from manufacturing process due to development of LCD industry. Experiments were carried out by replacing 10% and 20% cement of LCD waste glass with particle size of $12{\mu}m$ of LCD waste glass with OPC and particle size of $5{\mu}m$, respectively. Through experiments, basic properties, mechanical properties and durability of concrete were evaluated. Experimental results show that the compressive strength is high at 10% replacement ratio compared to 20%. The lower the particle size, the higher the strength. The durability test evaluated the chloride penetration performance through the chloride ion diffusion coefficient. The higher the substitution rate and the smaller the particle size, the lower the chloride ion diffusion coefficient and the better the OPC than the all substitution rate. As a result, LCD waste glass concrete with low granularity and proper replacement ratio is considered to be advantageous for durability under salt environment.

• Journal of the Korean Society for Railway
• /
• v.12 no.2
• /
• pp.243-248
• /
• 2009

The operation of KTX in Korea has launched since 2004, which brought about a great change in railroad industry. We have acquired lots of great know-hows, especially in railroad construction and operation field. Therefore, we have been building up numerous operation skills until now. However, it was necessary to investigate some of the equipment based on our own environment because the high speed train system were totally imported. In case of Toughened Glass Stem Insulator, it was totally new type in domestic. This paper introduces estimation method and result in three different field aspect, such as an electrical field, a physical field, and environmental circumstances. First, in case of an electrical field, amplitude and a number of time for switching surge voltage data were collected. Second, in case of a physical field, amplitude and trend of vibration in to the insulator were examined. Finally, in case of environmental circumstances, flying possibility of gravel and ice clod were investigated. Also shrink and expend characteristic according to temperature were reviewed. Through this basic data, suitability for Toughened Glass Stem Insulator using in domestic high speed railway have been accumulated and estimated.

• Journal of Korea Entertainment Industry Association
• /
• v.13 no.7
• /
• pp.183-192
• /
• 2019

This study studied five major films from the 1980s to the 2000s when Philip Glass's minimal music was used, and studied the aesthetic and functional meaning of the minimal music. Minimal music has a repetitive rhythm and is understood to be aesthetically monotonous, to avoid a particular purpose, or as an expression of moveless. On the one hand, it can mean infinite persistence by repetitive rhythms, or sometimes repetition with subtle changes. The functions of film music were applied as the function of film music common to many theorists. As a result of the analysis of the music in five films, the aesthetic meaning of Philip Glass's minimal music was most relevant to the characteristics of the film story, and the functional meaning of the film music was determined by the structure, form, and genre of the film. Therefore, the theme of the film and the contents of the story played an important role in the aesthetic interpretation of film music with repetitive rhythm characteristics. And the elements of the plot such as the structure, form, and genre of the film are thought to have had a significant effect on the functional interpretation of the film music. The aesthetic value of the film music is closely related to the story of the film, and the functional meaning of the film music is interpreted as determined by the formal elements of the film.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.27-36
• /
• 2019

The demand for a low dispersion lens with a small refractive index and a high refractive index is increasing, and accordingly, there is an increasing need for a releasable protective film with high heat resistance and abrasion resistance. On the other hand, the optical industry has not yet established a clear standard for the manufacturing process and quality standards for mold-releasing protective films used in aspheric glass lens molding. Optical lens manufacturers treat this technology as proprietary information. In this study, an experiment was conducted regarding the optimization of ion etching, magnetron, and arc current at each source and filter part, and bias voltage in FCVA (filtered cathode vacuum arc)-based Ta-C thin film coatings. This study found that compared to iridium-rhenium alloy thin film sputtering products, the coating conditions were improved by approximately 50%, 20%, and 40% in terms of thickness, hardness, and adhesive strength of the film, respectively. The thin-film coating process proposed in this study is expected to contribute significantly to the development and utilization of glass lenses, which will help enhance the minimum mechanical properties and quality of the mold-release thin film layer required for glass mold surface forming technology.

• The Optical Journal
• /
• s.138
• /
• pp.26-28
• /
• 2012

(주)모노클(대표 이강수 www.monocle.co.kr)은 LCD, PDP, OLED 제조공정에서 필요로 하는 광학 Stage의 국산화와 가공기술개발에 앞장서 왔다. 현재 정밀 Quartz 및 Ceramic가공 기술을 바탕으로 Lens, Prism, Mirror & Filter Stage Glass, Micro & Macro Optical Parts, Optical Systems 등을 주력으로 생산해 오고 있다. 작은 중소기업이지만 (주)모노클이 세계시장에서 경쟁할 수 있는 제품을 생산하며 큰 역량을 발휘할 수 있었던 원동력은 꾸준히 연구개발에 투자하여 기술집약적 토대를 만들었기 때문이다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.946-948
• /
• 2006

It is important to keep a constant transmittance of dielectric during firing. To control the shrinkage and fusion stage of frits in firing, we used a hot stage microscope (HSM) to analyze the thermal properties of the lead and bismate glass frits by the in-situ method. This research would be useful for improving the reliability of transmittance of dielectric during firing in industry using a large furnace with temperature deviation.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.724-727
• /
• 2014

This paper is analyzing the situation of the Internet of Things Industry and draw the policy implications to promote Internet of Things industry. Major IT companies as Apple, Google, IBM, Sony, and Samsung have developed various smart glass and smart watch as a Iot products. In order to promote Iot Industry, we should take the build up of eco system between IT makers and the various contents provider, protection of personal information and data, development of killer applications and business models, and the conversion from IPv4 to IPv6 as a next internet address infra, build up of international standard platform on IoT.

• Journal of Radiation Industry
• /
• v.5 no.2
• /
• pp.137-143
• /
• 2011

Epoxy resins are widely used as high performance thermosets in many industrial applications, such as coatings, adhesives and composites. Recently, a lot of research has been carried out in order to improve their mechanical properties and thermal stability in various fields. Carbon nanotubes possess high physical and mechanical properties that are considered to be ideal reinforcing materials in composites. CNT-reinforced epoxy system hold the promise of delivering superior composite materials with their high strength, light weight and multi functional features. Therefore, this study used multi-walled carbon nanotubes (MWNT) and gamma rays to improve the mechanical and thermal properties of epoxy. The diglycidyl ether of bisphenol A (DGEBA) as epoxy resins were cured by gamma ray irradiation with well-dispersed MWNTs as a reinforcing agent and triarylsulfonium hexafluoroantimonate (TASHFA) as an initiator. The flexural modulus was measured by UTM (universal testing machine). At this point, the flexural modulus factor exhibits an upper limit at 0.1 wt% MWNT. The thermal properties had improved by increasing the content of MWNT in the result of TGA (thermogravimetric analysis). However, they were decreased with increasing the radiation dose. The change of glass transition temperature by the radiation dose was characterized by DMA (dynamic mechanical analysis).

• Journal of the Korean Society of Industry Convergence
• /
• v.5 no.1
• /
• pp.27-32
• /
• 2002

In this study, estimate of Mechanical Properties depending on Injected direction in Polymer for Automobile Application. The used materials is polyamid(nylon6), polypropylene(PP) of a simple component and its mixed, reinforced glass fiber(15%) in polyamid. One side direction of a simple component is highest strength and the two sides direction of multicomponent appear lowest strength. This is caused by effects of weldline, imperfect fusion and impregnation of multicomponent. To improve mechanical properties, it is necessary to minimize of weldline, compatibility, perfect fusion and impregnation in multicomponent polymer.