• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 춘계학술발표대회 논문집
• /
• pp.89-92
• /
• 2002

Traditionally unidirectional laminated composite which are characterized by high specific stiffness and strength were used for structural application. But theses composites are highly susceptible to impact damage because of lower transverse tensile strength. The main failure modes of laminated composite are fiber breakage, matrix cracking and delamination for low velocity impact. The modified failure criterions are implemented to predict these failure modes with finite element analysis. Failure behavior of the woven fabric laminated composite which is used in forehead part of subway to lighten weigh has been studied. The new failure criterions are in good agreement with experimental results and can predict the failure behavior of the woven fabric composite plate subjected to low velocity impact more accurately.

• 한국정밀공학회지
• /
• 제17권2호
• /
• pp.169-175
• /
• 2000

The object of this study was to investigate the feasibility of solid-phase forming of the composites and to characterize the material behavior in the biaxial stretch forming. The materials tested contained 20%, 30%, and 40% glass fibers by weight in a polypropylene matrix. Biaxial stretch forming tests were performed at three forming speeds of 10mm/sec, 1mm/sec, and 0.1mm/sec and at four forming temperatures of $75^{\circ}C, 100^{\circ}C, 125^{\circ}C, and 150^{\circ}C$ to investigate effects of forming speed and forming temperature. The microscopic observation of a formed part was conducted at various strain levels to characterize the material behavior. The strain distribution on a formed part was measured and displayed on the farmed geometry with a contour display The material behavior of the composite in the biaxial stretch forming was strongly influenced by the forming conditions.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 1999년도 춘계학술발표대회 논문집
• /
• pp.189.1-192
• /
• 1999

본 연구에서는 카본 부직포와 유리스크림을 사용한 하이브리드 복합적층판의 인장특성을 평가하였다. USN125계열 탄소섬유강화 복합재료의 층과 층 사이에 부직포와 유리 스크림을 사용하고 오토클레이브를 이용하여 시험편을 제작하였다. 그 결과 섬유강화 복합재료의 기계적 특성은 유리 스크림을 삽입한 시험편보다 부직포를 삽입하여 개선되었다.

• Advances in aircraft and spacecraft science
• /
• 제7권6호
• /
• pp.475-493
• /
• 2020

This paper is focused on the characterization of the thermomechanical properties of semicrystalline poly-ether-ether-ketone (PEKK) and of carbon fiberreinforced thermoplastic based laminated composites (C/PEKK) below and above the glass transition temperature (T_g). Differential Scanning Calorimetry (DSC), Dynamic Mechanical Analysis (DMA) and tensile tests are carried out on both pure PEKK polymer and [(±45)₂, +45]_s C/PEKK composite samples, showing a significant similarity in behavior. The employment of a simple micromechanical model confirms that the mechanical and physical behavior of the polymer and that of the matrix in the composite are similar.

• Composites Research
• /
• 제34권1호
• /
• pp.8-15
• /
• 2021

조선해양 산업에서 선박의 에너지 절감과 운항효율 향상을 위한 부품의 경량화 기술이 요구됨에 따라서, 고강도의 경량소재인 섬유강화 복합소재를 부품소재로 적용하는 방안이 검토될 수 있다. 본 연구에서는 LNGC 경량화를 위해 파이프 지지용 클램프의 섬유강화 복합소재 적용 가능성을 평가하였다. 탄소섬유 및 유리섬유를 강화섬유로 하여 섬유강화 복합소재를 제조하였으며, 컴퓨터 시뮬레이션 프로그램을 통해 복합소재의 강화재료와 기지재료의 물성을 역계산하여 섬유 적층 패턴별 물성 변화에 따른 성능 예측을 수행하였다. 또한, 유한요소해석 프로그램를 통해 복합소재 두께에 따른 클램프의 구조해석을 수행하였다. 연구결과 경량화를 위해 클램프의 섬유강화 복합소재의 적용시 두께 선정에 주의가 필요함을 확인할 수 있었다. 향후 보완 설계 시 구조물의 형상변경 및 경량화를 위한 구조변경에 용이할 것으로 판단된다.

• International Journal of Automotive Technology
• /
• 제4권4호
• /
• pp.203-211
• /
• 2003

This paper describes a method for a falling weight impact test to estimate the impact energy absorbing characteristics and impact strength of CFRP (Carbon-fiber reinforced plastics) laminate plates based on considerations of stress wave propagation theory, which were converted to measurements of load and displacement verses time. The delamination area of impacted specimens for the different ply orientations was measured with an ultrasonic C-scanner to determine the correlation between impact energy and delamination area. The energy absorbed by a quasi-isotropic specimen having four interfaces was higher than that of orthotropic laminates with two interfaces. The more interfaces, the greater the energy absorbed. The absorbed energy of a hybrid specimen embedding GFRP (Glass-fiber reinforced plastics) layer was higher than that of normal specimens. Also, a falling weight impact tester was built to evaluate the characteristics and impact strength of CFRPs.

• Journal of the Korean Wood Science and Technology
• /
• 제44권4호
• /
• pp.505-514
• /
• 2016

To study mechanical properties of fiberglass reinforced wood-based composite (FRWC), fiberglass with a diameter of $20{\mu}m$ was selected to prepare test specimens. Mechanical properties of fiberglass reinforced wood-based composite were determined by three-point-bending test while its microstructure was characterizes by scanning electron microscopy (SEM). The results showed that mechanical properties of fiberglass reinforced wood-based composite were superior to that of the wood fiberboard based on the contrasting mechanical curves and the analysis of fracture mechanism. It is believed that the material design with this "sandwich" structure brings a unique buffering capacity of fiberglass into play in the composites. So the specimen did not produce a sudden fracture failure at high level of applied loads because it had a bearing ability. The SEM analysis showed that the working strength of PVAc adhesive was high; under a bearing force, it could properly transfer a load. In addition, glass fiber mesh and wood fiber board combined well.

• Advanced Composite Materials
• /
• 제17권2호
• /
• pp.177-190
• /
• 2008

As the first step in discussing the reliability of composite structures, a fundamental study was performed to obtain the scattering characteristics of glass-fiber reinforced plastics (GFRP) and woven carbon fiber reinforced plastics (WCFRP) as well as a reference metal. The Euler buckling load was obtained experimentally for each material. The experiments were conducted for specified rectangular specimens with simply supported edges. A new attachment to realize the simply support boundary conditions for composite materials have been prepared before these experiments. The scattering data in the results for GFRP and WCFRP composites were compared with those of a typical metal of aluminum alloy. The experimental data were also compared with numerical simulations including the uncertainties.

• Fibers and Polymers
• /
• 제5권4호
• /
• pp.259-263
• /
• 2004

Rubber-modified epoxy resins have been employed as adhesive and matrix materials for glass and corbon-fiber composites. The behavior of fracture around a crack tip for rubber-modified epoxy resin is investigated through the acoustic emission (AE) analysis of compact tension specimens. Damage zone and rubber particles distributed around a crack tip were observed by a polarized optical microscope and an atomic force microscope (AFM). The damage zone in front of pre-crack tip in rubber-modified specimen $(15wt\%\; rubber)$ began to form at about $13\%$ level of the fracture load and grew in size until $57\%$ load level. After that, the crack propagated in a stick-slip manner. Based on time-frequency analysis of AE signals and microscopic observation of damage zone, it was thought that AE signals with frequency bands of 0.15-0.20 MHz and 0.20­0.30 MHz were generated from cavitation in the damage zone and crack propagation, respectively.

• Composites Research
• /
• 제32권2호
• /
• pp.96-101
• /
• 2019

섬유와 수지 간 계면접착력은 복합재료 성능과 관련되므로 이를 정확하게 평가하는 것은 매우 중요하다. 본 연구에서는, 피로 하중 조건에서의 마이크로드롭렛 실험에 의한 계면접착력 평가를 실시하였다. 도파민이 적용된 에폭시 수지에 대하여 기계적 물성 및 계면접착력을 측정하였다. 기계적 물성을 평가하기 위해 인장 시편을 제작하였고, 계면 접착력 평가를 위하여 유리섬유에 에폭시 마이크로드롭렛을 만든 시편을 사용하였다. 특히 마이크로드롭렛 피로 실험 시 동일한 직경의 마이크로드롭렛을 사용하여 동일한 조건에서 실험하였다. 그 결과 인장 및 마이크로드롭렛 실험을 통해 에폭시 수지에 도파민이 적용될 때 기계 및 계면접착력이 향상됨을 확인하였다. 도파민이 에폭시 수지의 경화정도를 향상시키고 에폭시 수지에 하이드록실 그룹을 부여하여 기계적 물성 및 유리섬유 간 계면 접착력을 증가시켰을 것으로 사려된다.