• International Journal of Highway Engineering
• /
• v.18 no.4
• /
• pp.69-75
• /
• 2016

PURPOSES : In this study, we evaluated changes in the retroreflectivity and luminance of phosphorescent road line markings with changes in glass beads and line marking thickness. METHODS : The color of line markings affects their retroreflectivity. Using a chromaticity test, we conducted the analysis of whether phosphorescent road line markings adhered to the "KS M 6080" standard. Then, we measured the dry retroreflectivity and wet retroreflectivity for various glass bead refractive indices. We conducted wet retroreflectivity test using the EN 1436 standard as the basis. We also conducted luminance tests for different glass bead refractive indices and line marking thicknesses. RESULTS : 1. Phosphorescent road line markings specimens satisfied the "KS M 6080" standard. 2. In dry retroreflectivity test, phosphorescent road line markings sprayed with glass beads satisfied the national police agency standard ($240mcd/(m^2{\cdot}Lux)$). Wet retroreflectivity test results showed that except for one type of No.1 glass beads, phosphorescent road line markings specimens sprayed with glass beads of one type of No.3 and two types of No.1 satisfied the national police agency standard ($100mcd/(m^2{\cdot}Lux)$). 3. Phosphorescent road line markings had higher retroreflectivity than non-phosphorescent road line markings in the dry condition. 4. Phosphorescent road line markings sprayed with glass beads demonstrated improved luminance. Luminance increased with higher glass bead refractive index and with increased line marking thickness. However, when the thickness crossed a certain threshold, phosphorescence ceased to increase; this is a characteristic of the phosphorescence phenomenon. CONCLUSIONS : Visibility across short distances can be ensured when phosphorescent road line markings are sprayed with glass beads, because of the retroreflection phenomenon. It is also possible to ensure far visibility using phosphorescent road line markings.

• Korean Chemical Engineering Research
• /
• v.50 no.6
• /
• pp.952-959
• /
• 2012

The photocatalytic reactor was designed to have improved efficiency by enhancing a light intensity of photocatalytic reactor using a reflector coated on the surface at the outer radius of annular shaped photocatalytic reactor. The improved photocatalytic reactor performed to treat waste air containing malodor and VOC with the enhanced light intensity, of which the effect on their removal efficiency was investigated. The intensities of illumination of the improved photocatalytic reactor filled with porous silica-based media and nonporous glass bead media carrying photocatalyst were observed to increase by 28.5% and 30.1%, respectively, compared to those of photocatalytic reactor without any reflector. Using the improved photocatalytic reactor filled with porous silica-based media and nonporous glass bead media carrying photocatalyst, the removal efficiencies were enhanced by 2~3% and insignificantly, respectively. The removal efficiencies of the optimized photocatalytic reactor with reflectors, filled with porous silica-based media carrying photocatalyst, were observed to increase by 26% and 60%, compared to those of photocatalytic reactor (i.e., 19% and 53%), without any reflector, filled with nonporous glass bead media carrying photocatalyst, for hydrogen sulfide and toluene, respectively. The roughness of used reflector surface was measured to be ca. four times as big as that of a commercial mirror. However, their removal efficiencies are expected to be enhanced by increasing an light intensity resulting from lowering the roughness of used reflector coated on the improved photocatalytic reactor in the future.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1996.04a
• /
• pp.121-131
• /
• 1996

Recently, circulating liquid fluidized bed heat exchangers are widely used in a number of places - chemical, process, food concentration, waste water treatment facilities, etc. In a circulating heat exchanger, solid particles circulate with the liquid, thereby increase the heat transfer and reduce the fouling potential of the heat exchanger. In this study, glass beads were circulated through a vertical tube. The pressure loss and the heat transfer coefficient were measured. At low flow velocities, glass beads enhanced the heat transfer considerably. The enhancement increased as the volume fraction of the glass beads increased. It also increased as the particle diameter increased. The pressure loss showed a similar trend. From the observed particle behavior near tube wall, a possible explanation of the trend is provided.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.12
• /
• pp.3715-3721
• /
• 2013

In this study, the behavior of cells on the modified surface, and the correlation between the modified substrates and the response of cells is described. A close-packed layer of nano-sized silica beads was prepared on a coverslip, and the adhesion, proliferation, and migration of BALB/3T3 fibroblast cells on the silica layer was monitered. The 550 nm silica beads were synthesized by the hydrolysis and condensation reaction of tetraethylorthosilicate in basic solution. The amine groups were introduced onto the surfaces of silica particles by treatment with 3-aminopropyltrimethoxysilane. The close-packed layer of silica beads on the coverslip was obtained by the reaction of the amine-functionalized silica beads and the (3-triethoxysilyl)propylsuccinic anhydride treated coverslip. BALB/3T3 fibroblast cells were loaded on bare glass, APTMS coated glass, and silica bead coated glass with the same initial cell density, and the migration and proliferation of cells on the substrates was investigated. The cells were fixed and stained with antibodies in order to analyze the changes in the actin filaments and nuclei after culture on the different surfaces. The motility of cells on the silica bead coated glass was greater than that of the cells cultured on the control substrate. The growth rate of cells on the silica bead coated glass was slower than that of the control. Because the close-packed layer of silica beads gave an embossed surface, the adhesion of cells was very weak compared to the smooth surfaces. These results indicate that the adhesion of cells on the substrates is very important, and the actin filaments might play key roles in the migration and proliferation of cells. The nuclei of the cells were shrunk on the weakly adhered surfaces, and the S1 stage in which DNA is duplicated in the cell dividing processes might be retarded. As a result, the rate of proliferation of cells was decreased compared to the smooth surface of the control. In conclusion, the results described here are very important in the understanding of the interaction between implanted materials and biosystems.

• Conservation and Restoration of Cultural Heritage
• /
• v.1 no.1
• /
• pp.3-8
• /
• 2012

Chemical compositions and lead isotope ratios for four glass bead samples of Seokga-tap were analyzed and the results were organized. Among 4 glass beads found in the Seokga-tap, 3 pieces were lead glass. Manufacturing method was to firstly grind pebbles finely and mix lead ore to be melt at $740{\sim}760^{\circ}C$. The mixed ratio of silica and lead was 3:7. Moreover, The evaluation on the lead isotope ratio indicated that two lead glass pieces used lead ore from northern Korea. One piece has the direction of southern Korea lead ore, but it requires a further review. One glass bead of Seokga-tap was brown and it was potash lead glass ($K_2O-PbO-SiO_2$) System. The mixed ratio was approximately 50:10:40 for silica, natural saltpeter, and lead, respectively. Lead isotope ratio data fell within the lead ore from northern China. Therefore, it was concluded that potash lead glass found in the Seokga-tap was produced in northern area of China at the end of $10^{th}$ century and transferred to the Seokga-tap.

• 보존과학연구
• /
• s.21
• /
• pp.57-75
• /
• 2000

We performed the scientific analysis through composition analysis, micro-structure investigation, melting point and hardness test to the glass beads excavated at Naesanri in Gosung. Through this investigation, we could examine closely the characterization of raw materials and manufacture technique As a result of micro-structure investigation of glass beads, it appeared that the bubbles in glass beads have remained. Coloring agents of yellow glass bead was remained to the shape of inclusion. And on observing the transparent solid particle, we can know that these do not melt the raw materials because of low melting temperature of a crucible. The result of composition analysis of all glass beads using ICP, these were classified as $Na_2O_2$-$SiO_2$ type of glass. Also, these added to $AI_2O_3$ to improve the durability. The value of Vickers hardness of glass beads appeared the HV 490-530. The HV 1,440 of the transparent solid particle was much more than that of inner glass bead. This means that raw materials do not melt because of a low melting temperature of a crucible. The result of melting temperature analysis of glass beads using DSC/TGA, it was measured about $1,250^{\circ}C$.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2009.10a
• /
• pp.196-197
• /
• 2009

지하에 전류를 흘려보내 분극현상을 유도하고, 이 유도분극 현상을 측정하는IP탐사는 금속 광물 탐사에서 널리 이용되고 있다. 특히 광대역주파수를 이용하는SIP탐사는 IP탐사에서 측정하는 전기비저항과 더불어 위상정보까지 제공해 줄 수 있어 금속광물의 종류를 구분하는 등 보다 효과적인 탐사 방법으로 제시되고 있다. 이 연구는 최근 원자재가 급등에 따른 국내 외 광산개발에 필요한 자원탐사 기술 개발의 일환으로 광석 중에 포함되어 있는 금속광물의 SIP 효과에 대한 기초적 연구를 수행한 것이다. 암석의 SIP를 측정 시스템은 GDP-32 system과 Lab transmitter(Zonge)를 사용하여 구성하였으며, 주파수에 따른 IP 효과를 측정하기 위하여 KCl 0.01 mol 용액으로 포화시킨 Glass beads에 황철석 분말의 중량비를 증가 시키면서 SIP를 측정하였다. 실험에 사용된 Glass beads의 직경은 $0.75{\sim}1.0\;mm$의 범위이고, 황철석은 원광석을 분쇄하여 $20{\sim}25$ mesh를 통과한 분말을 사용하였다. 실험방법은 아크릴 수지로 만든 육면체 시료홀더를 사용하여 처음에는 KCl 0.01 mol 용액으로 포화시킨 Glass beads의 SIP를 측정하고, 그 다음에 Glass beads 내에 황철석 분말을 중량비로 $1{\sim}10%$까지 증가 시키면서 SIP를 측정하였다. 이 때 사용한 주파수 대역은 $0.016{\sim}1024\;Hz$ 이며, 측정결과로부터 전기비저항과 Phase를 산출하여 도시하였다.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.6
• /
• pp.117-124
• /
• 2013

Recently, the cell adhesion phenomenon that occurs in or between cells and other substances has become an important field of research in biology and biomedical engineering. Among the research, the foundational studies primarily experiment using biomedical materials (e.g. Glass Beads) attached to an AFM cantilever. For cell adhesion research, the mechanism where biomedical materials can be attached to the cantilever must be developed for this purpose; however, the mechanism remains an insufficient step. In this paper, a new stage where the Glass Bead can be attached to the cantilever is designed and fabricated;, the mm range movement in the stage is controlled using the stepping motor with a minimum displacement of $1{\mu}m$. The adhesive flow is also controlled using a PZT actuator. In addition, through the air suction, the cantilever holder can be fixed to the stage. The new stage including the bond inflows mechanism is evaluated and analyzed using theory and experiments.

• KSBB Journal
• /
• v.17 no.3
• /
• pp.311-313
• /
• 2002

Lactobacillus spry. are Gram-positive bacteria playing important roles in human health. In this study, we successfully isolated the total RNA from the cells broken by glass beads using hot phenol method. Moreover, we were able to omit lysozyme and proteinase K treatment by using glass beads to break cell more efficiently. This method was more rapid and simple when compared to the previous one. Prepared RNA can be used for the transcriptional analysis of Lactobacillus spp.

• Journal of the Society of Disaster Information
• /
• v.4 no.2
• /
• pp.68-91
• /
• 2008

Our country is consuming huge source of revenue to improve geometric structure of road with a view to improve safety of the road. However, it is more efficient to provide high-quality pavement markings to the road users. For this purpose, in this study, it is considered the optical theory related to retroreflectivity of pavement marking along with the our country's study literature and foreign. And also considered ur country standard related to pavement marking, made pavement marking sample and measured retroreflectivety. For the experiment, it is selected colors of normal temperature-type paints, grading and content of glass bead as experiment factors. After it is made the same conditions like construction spot, measured retroreflectivity according to the combination of factors and analyzed the optimization of factors.