• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.1347-1348
• /
• 2013

• 폴리머
• /
• 제25권5호
• /
• pp.691-698
• /
• 2001

에폭시 (diglycidyl ether of bisphenol A: DGEBA), 경화제 (dicyandiamide; DICY), 촉매 (benzyl dimethyl amine : BDMA), 그리고 유기치환된 실리케이트 (organically modified mica type silicate: OMTS)를 용융법 및 용액법을 이용해 나노복합체를 제조하였고, $170^{\circ}C$에서 시간에 따라 경화 반응을 진행하면서 X선 회절분석기 (XRD)와 소각 X선 산란장치 (SAXS)를 이용하여 구조 변화를 관찰하였다. 용융법으로 제조된 치료의 경우 박리된 구조를 관찰할 수 없었으나 용액법에 의해 제조된 경우 박리된 구조를 관찰할 수 있었다. 이는 OMTS 층 내ㆍ외부의 경화 속도차이 때문인 것으로 생각된다. 박리된 에폭시 나노복합체의 OMTS 첨가량에 따른 기계적 물성을 동적기계적 분석기 (DMA)를 이용해 측정한 결과 OMTS의 첨가량이 증가할수록 모둘러스는 증가하였으나 유리전이온도는 큰 차이가 없었다. OMTS 첨가량에 따른 열적 성질을 열중량분석기(TGA)와 한계산소지수 (LOI)를 이용해 측정한 결과 OMTS양이 증가할수록 OMTS 판의 차단효과로 인해 열분해 시작 온도와 LOI 값이 증가하였다.

• Elastomers and Composites
• /
• 제41권1호
• /
• pp.19-26
• /
• 2006

본 연구에서는 열화 온도가 아민 (D-230), 아마이드 (G-5022), 그리고 산무수물 (HN-2200)에 의해 경화된 에폭시 접착제의 질량변화, 유리전이온도 및 모폴로지에 미치는 영향을 고찰하였다. 실험 결과, 3가지 접착제 시편의 질량감소는 열화 온도가 증가함에 따라 증가하였다. 이는 열화 온도가 증가함에 따라 시편의 표면에서 더 많은 열화가 발생하여 시편의 질량이 감소한 것으로 판단된다. DSC 분석결과에 따르면 DGEBA/D-230과 DGEBA/G-5022 시편의 유리전이온도는 열화 온도에 따라 증가하였으며, DGEBA/HN-2200 시편의 유리전이온도는 열화온도 $150^{\circ}C$, 열화 시간 7일 이상에서 일정한 값을 나타내었다. SEM 결과에서 열화 이후의 DGEBA/G-5022 시편의 표면은 DGEBA/D-230 또는 DGEBA/HN-2200 시편보다 거친 모폴로지를 나타내었다. 이 결과는 시편의 질량 변화에서 얻은 결과와 일치하였다.

• 대한기계학회논문집A
• /
• 제32권9호
• /
• pp.788-795
• /
• 2008

To understand the tensile behaviors of GFRP at low temperature, three types of specimen have been used in this study. Tensile properties and fracture mechanisms for three orthogonal orientations of plain weave glass fabric reinforced epoxy resin laminate were investigated at temperature range of about -30 to $15^{\circ}C$. The tensile properties of axial and edge type specimen decrease slightly with decreasing temperature to $-20^{\circ}C$. However, at $-30^{\circ}C$ the decreases in the tensile properties increased considerably. Below $-20^{\circ}C$, thickness type specimen showed a marked decreases in the tensile properties. It was obvious that the fracture manner of thickness type specimen was adhesive failure at above $-10^{\circ}C$ and a mixed adhesive and cohesive failure at below $-20^{\circ}C$.

• 한국정밀공학회지
• /
• 제7권4호
• /
• pp.29-39
• /
• 1990

The purpose of this research is to analyze the impact behaviors of laminated composite plates subjected to the transverse low-velocity impact by the steel ball. A plate finite element model based on Whitney and Pagano's the first-order shear deformation theory (FSDT) in conjunction with experimental static contact laws is formulated and then compared with the results of the impact experiments. Because the input data and the output data printed at every integration time step are lots of amount, these are interactively poecessed by the developed pre-processor(PREPLOT) and postprecessor(POSTPLOT). All results from these procesors are automatically generated by CALCOMP plotter. Test materials are glass/expoxy composite materials. The specimens are composed of [$0^{\circ} /45^{\circ}/0^{\circ}/-45^{\circ}/0^{\circ}/]2s\ and \[90^{\circ}/45^{\circ}/90^{\circ}/-45^{\circ}/90^{\circ}/$]2s stacking sequences and have $4.5^t{\times}200^w{\times}200^l$(mm) and $4.5^t{\times}300^w{\times}300^l$(mm) dimensions.

• 한국자동차공학회논문집
• /
• 제17권3호
• /
• pp.15-21
• /
• 2009

The anisotropic mechanical properties were measured for the three orthogonal orientations of plain weave glass fabric reinforced epoxy resin laminate. In tensile and flexural tests, axial and edge type specimens failed by pull-out of warp and fill yarns, respectively. In contrast, the thickness type specimens failed by adhesive failure process. Longitudinal cracking occurred in several of the edge type specimens during tensile test. That cracking caused pop-in in the stress-strain curve. Defects induced by improper coupon machining caused that cracking.

• E2M - 전기 전자와 첨단 소재
• /
• 제8권2호
• /
• pp.136-143
• /
• 1995

With the contact angle of phase dropping epoxy resin on the inorganic filler(glass plate) surface treated with air plasma, we have studied about the interfacial wettability between epoxy resin and glass plate as a simple model of glass fiber reinforced composite materials. The contact angle on the inorganic filler surface varied with surface treatment conditions. The contact angle significantly depends on plasma treating time and environment temperature in the oven. From the view point of plasma treatment condition in this work, when discharge conditions were pressure 200mtorr, voltage 800V, magnetic flux density 8OGauss, optimum treatment time were proved as 3,4 and 5 minutes for the environment of >$80^{\circ}C$, >$100^{\circ}C$ and >$120^{\circ}C$, respectively.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 C
• /
• pp.1292-1294
• /
• 1994

With the contact angle of phase epoxy resin on the inorganic filler(glass plate) surface treated with air plasma, we have studied about the interface between epoxy resin and glass plate as simple model of a glass fiber reinforced composite materials. The contact angle on the inorganic filler surface varied with surface treatment conditions. The contact angle significantly depends on plasma treating time and environment temperature of the oven.

• Advanced Composite Materials
• /
• 제18권3호
• /
• pp.209-219
• /
• 2009

Carbon nanotubes (CNTs) have shown great potential for the reinforcement of polymers or fiber-reinforced composites. In this study, mechanical properties of multi-walled carbon nanotube (MWNT)-filled plain-weave glass/epoxy composites intended for use in radar absorbing structures were evaluated with regard to filler loading, microstructure, and fiber volume fraction. The plain-weave composites containing MWNTs exhibited improved matrix-dominant and interlaminar fracture-related properties, that is, compressive and interlaminar shear strength. This is attributed to strengthening of the matrix rich region and the interface between glass yarns by the MWNTs. However, tensile properties were only slightly affected by the addition of MWNTs, as they are fiber-dominant properties.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 B
• /
• pp.1233-1235
• /
• 1993

With the Contact angle of phase epoxy resin on the inorganic filler(glass plate) surface treated with air plasma, we have studied about the interface between epoxy resin and glass plate as simple model of a glass fiber reinforced composite materials. The contact angle on the inorganic filler surface varied with ambient temperature and surface treatment conditions.