• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.359-363
• /
• 2002

Several innovations for reducing the bulkiness of glass bulbs for flat and large CRTs have been made and further technologies are being developed by using material and structural approaches. The integrated glass technology based on these innovations will provide a lightweight shallow glass bulb for the realization of a half- depth CRT.

• Journal of Conservation Science
• /
• v.28 no.3
• /
• pp.205-216
• /
• 2012

65 samples of glass bead excavated from Mahan tombs of Asan Bakjimeure site consists of 13 of potash glass group and 52 of soda glass group and soda glass is superior in numbers. When classified according to color, purple blue glass bead is accompanied potash and soda glass group whereas purple glass bead is potash glass group and red, greenish blue, green and gold foil glass bead is soda glass group. Purple blue glass bead is classified as LCA type in which the content of the stabilizer is low. Of this, the soda glass categorized as LMK type with low content of MgO and $K_2O$ is determined that natron is used as the raw material. As to red glass, the homogeneous glass is LCA-B/HMK type and the heterogeneous glass is HCLA/LMK type. Thus, each of these two types are likely to be used plant ash and natron respectively. Greenish blue and green glass depends of the type that round glass is LCA-A/LMHK type and the segmented glass is LCA-B/HMK type. The gold foil glass bead is manufactured by the purity of 19.9~22.6K gold foil and the soda glass of HCLA/LMK type. In other words, the most of the glass bead of Asan Bakjimeure site is similar to the composition of the glass confirmed in other sites of the Baekche period. On the other hand, the greenish blue and green segmented bead and some red round bead is a different chemical composition is considered that the difference in raw materials. These characteristics is expected to be an important evidence for the understanding of the trade system of the ancient glass.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.373-376
• /
• 2008

New glass compositions for lead free, low temperature sealing glass frit was examined in $ZnO-V_2O_5-P_2O_5$ glass system which can be used sealing material for PDP to be made of soda lime glass substrates. Among many glass compositions, KFS-C glass showed low glass transition point (Tg) and good fluidity and adhesion characteristics when it was tested by flow button method at low temperature of $420^{\circ}C$. Its Tg was $317^{\circ}C$ and thermal expansion coefficient (CTE) was $70{\times}10^{-7}/K$. The glass frit was mixed with an organic vehicle to make a paste and it was dispensed and sealed with soda lime glass substrates at $420^{\circ}C$ for 10min. Sealed glass panels also showed good adhesion strength even sealed at low temperature of $420^{\circ}C$.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.12
• /
• pp.4173-4179
• /
• 2012

From Neungsalli Temple located in Buyeo, ancient glass vessel fragments were discovered along with hundreds of glass beads. In this research, we used SEM-EDS to analyze glass vessel fragments and beads excavated from Neungsalli Temple. Then, we analyzed their chemical composition and examined their characteristics. In particular, we investigated a relationship between glass vessels from Neungsalli temple and Hwangnamdaechong (South tomb). The result of our experiment showed that the glass artifacts from Neungsalli temple were all soda glass. To be specific, the vessel fragments were soda-lime glass and spherical beads were high-alumina soda glass. Then, we compared glass vessel fragments from Neungsalli temple to glass vessels excavated from Hwangnamdaechong. Glass vessels from both sites turned out to be soda lime glass. We classified them further based on raw material used for soda - natron and marine plant ash.

• Korean Journal of Materials Research
• /
• v.20 no.10
• /
• pp.524-534
• /
• 2010

Glass was fabricated using refused coal ore obtained from the Dogye coal mine in Samcheok. We additionally used soda ash and calcium carbonate to make a glass with the chemical composition of soda-lime glass, and we also used white, brown, and green glass cullet to make various kinds of colored glass. Transparent glass was fabricated by melting batch materials including refused coal ore at $1550^{\circ}C$ for 1 hr in an electrical furnace. The light transmittance and color chromaticity were measured by a UV/VIS/NIR spectrometer. Transparent glass with a light transmittance of over 80% was fabricated using normal refused coal ore and white glass cullet. Various kinds of colored glass with a light transmittance of 30-80% were fabricated using refused coal ore and brown or green glass cullet. The light transmittance of the mixed color glass samples, fabricated using normal refused coal ore and brown glass cullet and green glass cullet, indicated 30-47%, a relatively low value, in the condition of a cullet ratio of 20-50%. The characteristics of the color chromaticity of the glass samples were indicated in a chromaticity diagram by x-coordinates, y-coordinates, Y (lightness). The values of x-coordinates and y-coordinates were moved with a regular directional property according to the kind and amount of glass cullet. Therefore, we concluded that refused coal ore can be used for raw materials of color glass products like art glass and glass tile.

• Applied Chemistry for Engineering
• /
• v.16 no.4
• /
• pp.519-526
• /
• 2005

Hydrolysis of soda-lime waste glass was investigated to test the feasibility for use of waste glass as feed material in the production of foamed glass. The soda-lime glass, such as plate glass and various bottle glasses, was effectively hydrolyzed by steam and water under high pressure. The proper condition for the hydrolysis was found to be reaction temperature of $250^{\circ}C$ and reaction time of 2 h. Under this condition, the water content of hydrated glass through hydrolysis was 7.85~10.04%, allowing successful foaming process for production of foamed glass. Using Na as the modifying agent of glass was effective in the hydrolysis by water. The highest water content of hydrated glass was obtained when weight ratio of NaOH to the glass was 0.04.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2000.04a
• /
• pp.20-25
• /
• 2000

In order to study the impact fracture behavior of brittle materials, a steel-ball-impact experiment was Performed. Five kinds of materials were used in this study : soda-lime glass plates, glass/epoxy prepreg-one layer-bonded and unbonded glass plates, glass/epoxy prepreg-three layers-bonded and unbonded glass plates. Fracture patterns, the maximum stress and absorbed fracture energy were observed according to various impact velocities 40-120m/s. With increasing impact velocity, ring crack, cone crack, radial crack and lateral crack took place in the interior of glass plates. The generation of such cracks was largely reduced with glass/epoxy prepreg coating. Consequently, it is thought that the characteristics of the dynamic Impact fracture behavior could be evaluated using the absorbed fracture energy and the maximum stress measured at the back surface of glass plates.

• Journal of the Korean Ceramic Society
• /
• v.32 no.7
• /
• pp.858-864
• /
• 1995

A porous glass-ceramics body was prepared in the phosphate system. The glass composition of 47.2CaO-22.2TiO2-30.6P2O5 (mol%) containing a few weight percent of ZrO2 was suitable for a mother glass of a porous glass-ceramics. The dense glass-ceramics body was made by a two-step heat treatment of the mother glass. The crystalline phases of the glass-ceramics were $\beta$-Ca3(PO4)2 and CaTi4(PO4)6. The $\beta$-Ca3(PO4)2 phase could be selectively leached out with HCl solution and thus a crystalline $\beta$-Ca3(PO4)2 skeleton was remained. The dimension and shape of the porous glass-ceramics were nearly the same as the those of the first formed glass. The specific surface area and average proe radius of the porous glass-ceramics were 19$m^2$/g and 22 nm, respectively.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.19 no.2
• /
• pp.109-115
• /
• 2013

Glass bottle lightness index has been used as a guideline for the lightness of glass bottle. In this study, we developed a glass bottle lightness index (L) by modifying Emhart's lightness index. Domestic and foreign glass bottle products were collected in Korean market and classified into two groups, returnable bottle and one way glass bottle. Emptied glass bottle weight and volume were measured and written product's content volume were recorded to calculate the L value. Based on L value, 'acceptable' and 'optimum' criteria for design guideline of glass bottle were established for both returnable and one way glass bottles. Many of one way glass bottles failed to meet acceptable criteria (L=1.0), while returnable glass bottles mostly satisfied acceptable range (L=1.4). Few of one way glass bottles were even heavier than returnable glass bottles. Generally lightness index (L) of small size drink glass bottles (100 ml) were above 1.0, while these of juice glass bottles (180 ml) were close to acceptable criteria. Most foreign sauce glass bottles met the acceptable level, however most domestic souse glass bottles failed to satisfy acceptable criteria. A few foreign beer glass bottles satisfied optimum criteria, while most domestic beer glass bottles were acceptable level. Our results reveal that domestic glass bottles are mostly heavier than foreign glass bottles. In this paper, we suggest the use glass bottle lightness index as a design guideline for material resource reduction of glass bottle for Korean food and beverage industries.

• International Journal of Concrete Structures and Materials
• /
• v.18 no.2E
• /
• pp.125-132
• /
• 2006

Waste glass has been increasingly used in industrial applications. One shortcoming in the utilization of waste glass for concrete production is that it can cause the concrete to be weakened and cracked due to its expansion by alkali-silica reaction(ASR). This study analyzed the ASR expansion and strength properties of concrete in terms of waste glass color(amber and emerald-green), and industrial by-products(ground granulated blast-furnace slag, fly ash). Specifically, the role of industrial by-products content in reducing the ASR expansion caused by waste glass was analyzed in detail. In addition, the feasibility of using ground glass for its pozzolanic property was also analyzed. The research result revealed that the pessimum size for waste glass was $2.5{\sim}1.2mm$ regardless of the color of waste glass. Moreover, it was found that the smaller the waste glass is than the size of $2.5{\sim}1.2mm$, the less expansion of ASR was. Additionally, the use of waste glass in combination with industrial by-products had an effect of reducing the expansion and strength loss caused by ASR between the alkali in the cement paste and the silica in the waste glass. Finally, ground glass less than 0.075 mm was deemed to be applicable as a pozzolanic material.