• The Journal of the Korea Contents Association
• /
• v.14 no.12
• /
• pp.555-564
• /
• 2014

The boundary noise in image syntheses using DIBR consists of noisy pixels that are separated from foreground objects into background region. It is generated mainly by edge misalignment between the reference image and depth map or blurred edge in the reference image. Since hole areas are generally filled with neighboring pixels, boundary noise adjacent to the hole is the main cause of quality degradation in synthesized images. To solve this problem, a new boundary noise removal algorithm using a preprocessing of the depth map is proposed in this paper. The most common way to eliminate boundary noise caused by boundary misalignment is to modify depth map so that the boundary of the depth map can be matched to that of the reference image. Most conventional methods, however, show poor performances of boundary detection especially in blurred edge, because they are based on a simple boundary search algorithm which exploits signal gradient. In the proposed method, a two-step hierarchical approach for boundary detection is adopted which enables effective boundary detection between the transition and background regions. Experimental results show that the proposed method outperforms conventional ones subjectively and objectively.

• Journal of Korea Multimedia Society
• /
• v.14 no.3
• /
• pp.348-355
• /
• 2011

In this paper, we propose an automatic prostate segmentation method from dynamic magnetic resonance (MR) images. Our method detects contrast-enhanced images among the dynamic MR images using an average intensity analysis. Then, the candidate regions of prostate are detected by the B-spline non-rigid registration and subtraction between the pre-contrast and contrast-enhanced MR images. Finally, the prostate is segmented by performing a dilation operation outward, and sequential shape propagation inward. Our method was validated by ten data sets and the results were compared with the manually segmented results. The average volumetric overlap error was 6.8%, and average absolute volumetric measurement error was 2.5%. Our method could be used for the computer-aided prostate diagnosis, which requires an accurate prostate segmentation.

• Journal of Korea Multimedia Society
• /
• v.16 no.12
• /
• pp.1427-1438
• /
• 2013

We have developed a 128-bit stream cipher algorithm composed of the 5-stage pipeline, capable of real-time processing, confidentiality and integrity. The developed stream cipher is a stream cipher algorithm that makes the final 128-bit ciphers through a whitening process after making the ASR 277 bit and SHACAL-2 and applying them to the CFB mode. We have verified the hardware performance of the proposed stream cipher algorithm with Modelsim 6.5d and Quartus II 12.0, and the result shows that the hardware runs at 33.34Mhz(4.27Gbps) at worst case. According to the result, the new cipher algorithm has fully satisfied the speed requirement of wireless Internet and sensor networks, and DRM environment. Therefore, the proposed algorithm with satisfaction of both confidentiality and integrity provides a very useful ideas.

• Journal of Korean Neurosurgical Society
• /
• v.37 no.4
• /
• pp.275-281
• /
• 2005

Objective: The prolactinoma is the most common pituitary tumor and sometimes shows severe invasiveness to the adjacent cavernous sinus, especially in the male patient. The dopamine agonist can be used as an alternative treatment modality to surgery. But, the transsphenoidal or transcranial approach for tumor removal has been more preferred treatment option of neurosurgeons in invasive prolactinoma. Especially rapid decompression of mass effect and resolution of the neurologic deficit is demanded. The prospective study is done in order to identify the therapeutic efficacy of bromocriptine as an initial treatment option for the invasive prolactionomas. Methods: Twenty patients with invasive prolactinoma were studied. Preoperative neurological and endocrinological evaluations were done, and size and invasiveness of the tumor was estimated on MRI. Bromocriptine was administrated by increasing dose planning reaching maximum dose at 1 month of treatment, with close neurological and endocrinological monitoring. At 3months after treatment, MRI was taken and decision was made whether to continue bromocriptine or to have surgical intervention. Results: Thirteen patients showed excellent result with only bromocriptine treatment. These patients showed not only marked reduction of tumor volume and prolactin level, but also, improving clinical symptoms and other hormonal deficits. 13patients who had visual field defect and decreased visual acuity had all improved visual symptoms. But, the remaining 4patients required surgical treatment due to insufficient reduction of tumor size inspite of normalized prolactin level within 3months. Remaining 2patients had $20{\sim}30%$ of tumor size reduction, but prolactin level was not normalized. One patient required radiation therapy. Conclusion: Bromociptine can be used as initial treatment for the invasive prolactinomas with careful monitoring of the neurological and endocrinological status. It should be carefully followed up for tumor size reduction within 3 months after initiation of treatment.

• The Journal of the Korea Contents Association
• /
• v.18 no.3
• /
• pp.160-171
• /
• 2018

The purpose of this study is to present segmentation strategies by analyzing SMEs' perceptions of SME support program. That's why we used the research report of the NST(National Research Council of Science & Technology), which is advanced cooperation way between GRIs and SMEs based on market demand. As a result of this study, it was found that there is a difference in the demand for the SME support program depending on the type of cooperation and the cooperation experience with GRIs. This implies that a differentiated support strategy is required for the establishment of successful partnership between GRIs and SMEs. The result of this study suggests the direction of open collaborative ecosystem formation in the future based on the support strategies of each cluster. And it is expected to help SMEs improve the competitiveness and efficiency of support through effective customization support do.

• Journal of KIISE:Information Networking
• /
• v.37 no.3
• /
• pp.187-197
• /
• 2010

The fusion stream of recent broadcasting and communication make multimedia content served in the area of broadcasting into IPTV service which transmits it through high-speed internet, cable TV net and satellite net in realtime. However, as the digital broadcasting service is extended to various media, the security of IPTV service content provided to users by service provider is not fully supported by CAS(Conditional Access System) provided by existing broadcasting system. This paper proposes interactive certification protocol which can efficiently distinguish the receiving-qualification of user between Set-Top Box and Smart Card which are parts of configurations for IPTV system. The proposed protocol uses hash function to make Set-Top Box transmit receiving-qualification about the channel fee which user pays more properly than existing protocol. Also, the proposed protocol uses session key generated between receiver and smart card through inter certification process and encrypts EMM not the service to be used by anyone illegally.

• Journal of Welding and Joining
• /
• v.27 no.3
• /
• pp.73-79
• /
• 2009

This present paper investigated the mechanical properties and the microstructures of each penetration shapes classifying the conduction shape area and the keyhole shape area about electron beam welded 120(T)mm thick plated aluminum 5052 112H. As a result the penetration depth is increased linearly according to the output power, but the aspect ratio is decreased after the regular output power. In the conduction shape area, the Heat affected zone is observed relatively wider than the keyhole shape area. In the material front surface of the welded specimen, the width is decreased but the width in the material rear surface is increased. After the measuring the Micro Vikers Hardness, it showed almost similar hardness range in all parts, and after testing the tensile strength, the ultimate tensile strength is similar to the ultimate tensile strength of the base material in all the specimens, also the fracture point was generated in the base materials of all the samples. In the result of the impact test, impact absorbed energy of the Keyhole shape area is turned up very high, and also shown up the effect about four times of fracture toughness comparing the base material. In the last result of observing the fractographs, typical ductile fraction is shown in each weld metal, and in the basic material, the dimple fraction is shown. The weld metals are shown that there are no other developments of any new chemical compound during the fastness melting and solidification.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.20 no.2
• /
• pp.20-23
• /
• 2012

본 연구는 유기성폐기물을 처리하고 그것을 이용하여 고체연료 또는 퇴비를 생산하는 종합시스템에 관한 것이다. 유기성폐기물은 90% 전후의 높은 함수율을 나타내고 있기 때문에 처리에 중점을 두어야 할 부분이 수분 처리 방법이다. 따라서 기존의 처리방법으로는 고액분리하여 처리 후 하천에 방류하는 시스템에 의해 처리되고 있다. 하지만 본 연구에서는 기술개발의 차별화 및 선행기술의 회피 전략을 위해, 유기성폐기물의 수분을 건조시키는 방법으로 미생물이 유기성폐기물의 유기물을 분해하여 발생 되는 $80^{\circ}C$ 이상의 열에너지에 의해 수분을 제거하는 발열반응을 적용하여 수분을 제거하는 무방류시스 템이다. 뿐만 아니라 고체연료의 발열량을 높이기 위해서 무연탄, 코크스, 기름 등의 열량보조제를 첨 가하는 대신에 유기성폐기물을 첨가 한 후 적당한 발열반응 및 건조시켜 고체연료를 제조하는 방법으 로 4,000kcal/kg 이상의 높은 발열량을 얻을 수 있으며 불완전연소 등에 의한 2차 오염을 방지할 수 있는 기술이다. 따라서 친환경 미생물 발열반응에 의해 유기성폐기물을 저렴한 비용으로 액상 및 고상 을 동시에 처리 할 수 있으며, 고체연료를 제조할 수 있는 새로운 신기술이다.

• Composites Research
• /
• v.26 no.5
• /
• pp.295-302
• /
• 2013

In this study, Al5052/CFRP composites were fabricated for an automobile component by compression molding process inside a U-channel mold. Al5052 sheet were treated by sand blasting with two different particle sizes. Accordingly, surface roughness (Ra) values of $4.25{\mu}m$ and $1.85{\mu}m$ were obtained for the treated Al5052 sheets. The effect of surface roughness of Al5052 sheets on the adhesion and mechanical properties of Al5052/CFRP composites have been evaluated. Shear lap test and 3-point bending test were conducted. Results showed that the shear load for the composite fabricated by using the treated Al5052 sheets with Ra value of $1.85{\mu}m$ and $4.25{\mu}m$ were 3 and 5 times higher than Ra value of $0.73{\mu}m$ of the composite fabricated by using the untreated sheet. The bending stress of 200MPa was obtained for the composite fabricated with untreated Al5052 sheets. The bending stress increased to 400MPa when the composite fabricated from treated sheets. However, the bending stress was not influenced by treating condition through sand blasting.

• Journal of Applied Reliability
• /
• v.16 no.3
• /
• pp.202-207
• /
• 2016

Purpose: The purpose of this study is main factors (environmental conditions, pattern spacing, pattern material) that effect the ion-migration of PCB. Methods: Recently, the electronic components are becoming more high density of electronic device, so that electronic circuits have smaller pitches between the patten and more vulnerable to insulation failure. so the reliability of electric insulation of device has become an ever important issue as device contact pitches of pattern. Usually, ion-migration occurs in high temperature and high humidity environment as voltage is applied to the circuit. Under high temperature and high humidity, voltage applied electronic components respond to applied voltages by metals's electrochemical ionization and a conducting filament forms between the anode and cathode across a nonmetallic medium. This leads to short-circuit failure of the electronic component. Results: we studied ion-migration that occurs in accordance with the main factors (environmental conditions, pitches, pattern material). The PCB pattern material was made by two different types of material (free solder, OSP) for this research and pitches of pattern is 0.15mm, 0.3mm, 0.5mm. PCB was experimented in the environmental conditions (high temperature $120^{\circ}C$, high temperature and high humidity $85^{\circ}C$, 85%RH) and was analyzed for ion-migration through the experiment results. Conclusion: We confirmed that environmental condition, pitches of pattern, pattern material had effect on ion-migration of PCB.