• KIEE International Transactions on Electrophysics and Applications
• /
• v.4C no.4
• /
• pp.155-159
• /
• 2004

This work reports the theoretical and experimental investigations of capillary bust valves to regulate liquid flow in microchannels. The theoretical analysis uses the Young-Laplace equation and geometrical considerations to predict the pressure at the edge of the valve opening. Numerical simulations are employed to calculate the meniscus shape evolution while the interface is pinned at the valve edge. Microchannels and valves are fabricated using soft lithography. A wafer-rotating system, which can adjust the driving pressure by rotational speed, induces a liquid flow. Experimentally measured valve-bursting pressure agrees with theoretical predictions.

• Structural Engineering and Mechanics
• /
• v.52 no.2
• /
• pp.323-349
• /
• 2014

In this paper, linear buckling analysis of a curved sandwich beam with a flexible core is investigated. Derivation of equations for face sheets is accomplished via the classical theory of curved beam, whereas for the flexible core, the elasticity equations in polar coordinates are implemented. Employing the von-Karman type geometrical non-linearity in strain-displacement relations, nonlinear governing equations are resulted. Linear pre-buckling analysis is performed neglecting the rotation effects in pre-buckling state. Stability equations are concluded based on the adjacent equilibrium criterion. Considering the movable simply supported type of boundary conditions, suitable trigonometric solutions are adopted which satisfy the assumed edge conditions. The critical uniform load of the beam is obtained as a closed-form expression. Numerical results cover the effects of various parameters on the critical buckling load of the curved beam. It is shown that, face thickness, core thickness, core module, fiber angle of faces, stacking sequence of faces and openin angle of the beam all affect greatly on the buckling pressure of the beam and its buckled shape.

• Korean Institute of Interior Design Journal
• /
• no.16
• /
• pp.175-181
• /
• 1998

The purpose of this study was to analyze the characteristics of expression and formal principle of universalism in Architectural Composition. Theorical category is to find universal system with the connection between idea of society and tradition in compositional frame the results were as follows : First it is the pursuit of divine. Through Middle Age and Renaissance universalism of principles in Architectural Composition is appeared a numerical order and human proportion with applying of cosmology. Second it is the pursuit of schema. With the simplicity of formal image it represented to the geometrical form for its clearness. Third it is the pursuit of typology. As to play a role of decisive factor in formal construction type represented the model with abstraction of shape.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2003.10a
• /
• pp.157-162
• /
• 2003

The 3D Image which embodies real object to 3D space of computer enables various geometrical analysis as well as visualization of complex 3D shape by giving sense for the real and cubic effect that can not be offered in 2D image. Human gives real object to same physical properties in 3D space imagination world of computer, and it is expected that this enables offering of various information by user strengthening interface between human-computer to observe object in real condition. In this study, formal style routine of 3D image creation applying digital photogrammetry was designed for more practical, highly trusty 3D image creation, and the system was emboded using object-oriented technique which strengthen user interface. Also, the discontinuity information about rock slope using 3D image is acquired that is orientation, persistence, spacing and aperture etc.

• Journal of Welding and Joining
• /
• v.34 no.3
• /
• pp.12-16
• /
• 2016

Friction stir welding(FSW) was studied using commercial tool, FLOW-3D. The purpose of this study is to suggest a method to apply frictional heat in Computational fluid dynamics(CFD) analysis. Cylindrical tool shape was used, and the interface cells between tool surface and workpiece were tracked by its geometrical relations in order to consider the frictional heat in FSW. After tracking the interface cells, average area concept was used to calculate the frictional heat, which is related to interface area. Also three-dimensional heat source and visco-plastic flow were modeled. The frictional heat generation rate calculated numerically from the suggested algorithm was validated with the analytical solution. The numerical solution was well matched with the analytical solution, and the maximum percentage of error was around 3%.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.2
• /
• pp.457-460
• /
• 2010

The geometrical structures and energetics of positively doubly charged fullerene dimer $(C_{60})_2{^{2+}}$ conformers were studied using semiempirical PM3 and MNDO, Hartree-Fock (HF), and Hybrid B3LYP density functional methods. The shape of the HOMO-LUMO for the three conformers was also analyzed. The gauche conformer was the most stable of the three conformers. The anti conformer was more stable than the syn conformer.

• Proceedings of the IEEK Conference
• /
• 2001.06d
• /
• pp.37-40
• /
• 2001

The most important issues in gesture recognition are the simplification of algorithm and the reduction of processing time. The mathematical morphology based on geometrical set theory is best used to perform the real-time processing. A key idea of the algorithm proposed in this paper is to apply morphological shape decomposition. The primitive elements extracted from a hand gesture have very important information including the directivity of the hand gestures. Based on this algorithm, we proposed the morphological hand-gesture recognition algorithm using feature vectors extracted from lines connecting the center points of a main-primitive element and sub-primitive elements. Through the experiments, we applied to the video contents browsing system with natural interactions and demonstrated the efficiency of this algorithm.

• Proceedings of the IEEK Conference
• /
• 2003.07c
• /
• pp.2717-2720
• /
• 2003

A mathematical framework for deriving acceleration bounds from given joint torque limits of two cooperating robots are described in this paper. Especially when the torque limits are given in 2-norm, the resultant geometrical configuration is ellipsoid(the ellipsoid is often called manipulability ellipsoid in many works). At first, the mathematical derivation starts from the dynamics of both object and robots as well as the kinematics of the robots, and is finally arranged in a form of equation relating joint torques to object acceleration through a complete constraint contact(or “very-soft contact”). To show the usefulness of the proposed method, two examples are included, and especially the case where friction effects the ellipsoid shape is also considered In the example.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2001.10a
• /
• pp.200-203
• /
• 2001

Micromolding methods such as micro-injection molding and micro-compression molding are most suitable for mass production of plastic micro-optics with low cost. In this study, plastic micro-optical components, such as refractive microlenses and diffractive optical elements(DOEs) with various grating patterns, were fabricated using micro-compression molding process. The mold inserts were made by ultrapricision mechanical machining and silicon etching. A micro compression molding system was designed and developed. Polymer powders were used as molded materials. Various defects found during molding were analyzed and the process was optimized experimentally by controlling the governing process parameters such as histories of mold temperature and compression pressure. Mim lenses of hemispherical shape with $250{\mu}m$ diameter were fabricated. The blazed and 4 stepped DOEs with $24{\mu}m$ pitch and $5{\mu}m$ depth were also fabricated. Optical and geometrical properties of plastic molded parts were tested by interferometric technique.

• Proceedings of the KSME Conference
• /
• 2001.06e
• /
• pp.202-206
• /
• 2001

The characteristics of heat transfer on the fire clay with microwave heating are numerically investigated using finite element method. The modelled regular hexahedron chamber($50cm{\times}50cm{\times}50cm$) filled with air consists of vertical heat source and sink walls, a fire clay model, and adiabatic plates at the top and bottom walls. With different geometrical aspect ratios of the fire clay model, the heat energy distribution is throughly investigated. The optimal shape of the fire clay for given chamber geometry and microwave power is analyzed.