• 제목/요약/키워드: Geometric structure

검색결과 994건 처리시간 0.035초

고지진학적 자료를 이용한 울산단층대 중부 말방지역에서의 단층운동 특성 해석 (Characterization of Fault Kinematics based on Paleoseismic Data in the Malbang area in the Central Part of the Ulsan Fault Zone)

  • 박기웅;정숙진;권오상;신현조;김영석
    • 한국지구과학회지
    • /
    • 제43권1호
    • /
    • pp.151-164
    • /
    • 2022
  • 역사지진과 계기지진 기록에 따르면 한반도 남동부는 우리나라에서 지진활성도가 가장 높게 평가되는 곳으로, 최근에 양산단층대와 울산단층대를 따라 제4기 단층이 다수 보고되어 고지진학적 연구가 활발하게 이루어지고 있다. 특히 울산단층대의 중부지역에 해당하는 경북 경주시 외동읍 말방리 일원은 울산단층대 내에서 가장 많은 활성단층이 보고된 지역이다. 따라서 이 지역에 대한 고지진학적 특성을 이해하기 위하여 먼저 LiDAR 영상 및 항공사진을 이용한 지형 및 선형구조 분석을 실시하여 단층에 의한 기복으로 추정되는 지형인자를 확인하고, 야외답사와 물리탐사를 통해 단층을 추적하여 기 보고된 말방단층 지점에서 약 300 m 북서쪽에 위치한 곳에서 길이 20 m, 너비 5 m, 깊이 5 m의 굴착조사를 실시하였다. 굴착단면을 통해 분석된 제4기 퇴적층의 특징을 바탕으로 단층의 기하학적·운동학적 특성을 해석하여 고지진학적 특성을 규명하고자 하였다. 이번 굴착단면에서 확인된 역단층의 기하를 보이는 단층의 자세는 N26°W/33°NE로 울산단층대를 따라 분포하는 기 보고된 단층들과 유사하다. 약 40 cm의 단일 겉보기 변위가 인지되었으나 단층조선의 부재로 실변위는 산출할 수 없었다. 선행연구에서 제안된 극저온구조층의 연대결과 값을 토대로 단층의 최후기 운동시기는 후기 뷔름빙기 이전으로 추정하였다. 기 보고된 연구결과와 본 굴착단면에서 획득한 단층기하를 종합하여 이 지역에 발달하는 단층계를 인편상구조로 해석하였고, 단층특성을 반영한 모델을 제시하였다. 말방리 일원에서 수 회의 굴착조사를 비롯한 다수의 선행연구가 수행되었음에도 불구하고 구체적인 단층변수에 대한 정보가 미진하고 각 지점들 간의 상관성이 명확하게 규명되지 않은 것은 역단층의 복잡한 운동학적 특성에 기인한 것으로 판단된다. 추후 고지진학적 연구가 추가적으로 수행된다면 상기의 문제점들을 해결하여 종합적인 단층의 형태와 운동사가 규명될 수 있을 것으로 판단된다.

AC 임피던스 분석법을 이용한 K+ 이온선택성 PVC막 전극 특성 (Electrode Characteristics of K+ Ion-Selective PVC Membrane Electrodes with AC Impedance Spectrum)

  • 김용렬;안형환;강안수
    • 공업화학
    • /
    • 제9권6호
    • /
    • pp.870-877
    • /
    • 1998
  • 본 연구에서는 임피던스 스펙트럼 분석법을 사용하여 중성운반체로 dibenzo-18-crown-6 (D18Cr6)와 valinomycin (Val)을 이용하여 $K^+$이온선택성 PVC막 전극의 막과 용액계면에서의 임피던스 특성을 검토하였다. PVC막에 대한 운반체의 종류와 함량, 가소제, 막두께, 기본전해질의 혼입(doping)여부 및 이온의 농도변화 등을 교류임피던스 분석법을 이용하여 측정하였고, 그 결과를 전극특성과 비교 검토하고 PVC막 전극에서의 전달특성을 규명하였다. 교류 임피던스의 특성을 측정하여 중성운반체로 D18Cr6와 Val을 포함하고 있는 PVC막 전극의 등가회로는 막의 벌크저항과 전기이중층 용량을 포함하는 기하학적용량을 병렬로 하고, 용액저항과 직렬로 구성되는 임피던스의 등가회로임을 확인할 수 있었다. 그러나 저농도 및 저주파수 영역에서 약간의 전하전이저항과 Warburg저항이 나타나 중첩되는 것을 알 수 있었다. $K^+$이온선택성 전극에서 운반체로서 D18Cr6가 Val중 D18Cr6가 기존의 Val보다 전극특성 및 임피던스 특성이 좋았으며 특히 D18Cr6에 기본전해질로 potassium tetraphenylborate (TPB)를 첨가한 경우 이상적인 전극을 제조할 수 있었다. 운반체의 최적 함량은 D18Cr6와 Val의 경우 3.23wt%부근이었고, 가소제는 DBP가 가장 적절하였다. 막두께가 얇아질수록 임피던스 특성이 좋아졌으나, 막두께가 최적 막두께 이하로 얇아지면 전극특성이 나빠짐을 알 수 있었다. D18Cr6의 경우 $K^+$이온에 대한 혼합용액법에 의한 선택계수 서열은 다음과 같았다. $NH_4{^+}>Ca^{2+}>Mg^{2+}>Na^+$.

  • PDF

Manganese and Iron Interaction: a Mechanism of Manganese-Induced Parkinsonism

  • Zheng, Wei
    • 한국환경성돌연변이발암원학회:학술대회논문집
    • /
    • 한국환경성돌연변이발암원학회 2003년도 추계학술대회
    • /
    • pp.34-63
    • /
    • 2003
  • Occupational and environmental exposure to manganese continue to represent a realistic public health problem in both developed and developing countries. Increased utility of MMT as a replacement for lead in gasoline creates a new source of environmental exposure to manganese. It is, therefore, imperative that further attention be directed at molecular neurotoxicology of manganese. A Need for a more complete understanding of manganese functions both in health and disease, and for a better defined role of manganese in iron metabolism is well substantiated. The in-depth studies in this area should provide novel information on the potential public health risk associated with manganese exposure. It will also explore novel mechanism(s) of manganese-induced neurotoxicity from the angle of Mn-Fe interaction at both systemic and cellular levels. More importantly, the result of these studies will offer clues to the etiology of IPD and its associated abnormal iron and energy metabolism. To achieve these goals, however, a number of outstanding questions remain to be resolved. First, one must understand what species of manganese in the biological matrices plays critical role in the induction of neurotoxicity, Mn(II) or Mn(III)? In our own studies with aconitase, Cpx-I, and Cpx-II, manganese was added to the buffers as the divalent salt, i.e., $MnCl_2$. While it is quite reasonable to suggest that the effect on aconitase and/or Cpx-I activites was associated with the divalent species of manganese, the experimental design does not preclude the possibility that a manganese species of higher oxidation state, such as Mn(III), is required for the induction of these effects. The ionic radius of Mn(III) is 65 ppm, which is similar to the ionic size to Fe(III) (65 ppm at the high spin state) in aconitase (Nieboer and Fletcher, 1996; Sneed et al., 1953). Thus it is plausible that the higher oxidation state of manganese optimally fits into the geometric space of aconitase, serving as the active species in this enzymatic reaction. In the current literature, most of the studies on manganese toxicity have used Mn(II) as $MnCl_2$ rather than Mn(III). The obvious advantage of Mn(II) is its good water solubility, which allows effortless preparation in either in vivo or in vitro investigation, whereas almost all of the Mn(III) salt products on the comparison between two valent manganese species nearly infeasible. Thus a more intimate collaboration with physiochemists to develop a better way to study Mn(III) species in biological matrices is pressingly needed. Second, In spite of the special affinity of manganese for mitochondria and its similar chemical properties to iron, there is a sound reason to postulate that manganese may act as an iron surrogate in certain iron-requiring enzymes. It is, therefore, imperative to design the physiochemical studies to determine whether manganese can indeed exchange with iron in proteins, and to understand how manganese interacts with tertiary structure of proteins. The studies on binding properties (such as affinity constant, dissociation parameter, etc.) of manganese and iron to key enzymes associated with iron and energy regulation would add additional information to our knowledge of Mn-Fe neurotoxicity. Third, manganese exposure, either in vivo or in vitro, promotes cellular overload of iron. It is still unclear, however, how exactly manganese interacts with cellular iron regulatory processes and what is the mechanism underlying this cellular iron overload. As discussed above, the binding of IRP-I to TfR mRNA leads to the expression of TfR, thereby increasing cellular iron uptake. The sequence encoding TfR mRNA, in particular IRE fragments, has been well-documented in literature. It is therefore possible to use molecular technique to elaborate whether manganese cytotoxicity influences the mRNA expression of iron regulatory proteins and how manganese exposure alters the binding activity of IPRs to TfR mRNA. Finally, the current manganese investigation has largely focused on the issues ranging from disposition/toxicity study to the characterization of clinical symptoms. Much less has been done regarding the risk assessment of environmenta/occupational exposure. One of the unsolved, pressing puzzles is the lack of reliable biomarker(s) for manganese-induced neurologic lesions in long-term, low-level exposure situation. Lack of such a diagnostic means renders it impossible to assess the human health risk and long-term social impact associated with potentially elevated manganese in environment. The biochemical interaction between manganese and iron, particularly the ensuing subtle changes of certain relevant proteins, provides the opportunity to identify and develop such a specific biomarker for manganese-induced neuronal damage. By learning the molecular mechanism of cytotoxicity, one will be able to find a better way for prediction and treatment of manganese-initiated neurodegenerative diseases.

  • PDF

안동시 풍천면 안동단층계 주변의 지질구조 (Geological Structure around Andong Fault System, Pungcheon-myeon, Andong, Korea)

  • 강지훈;이덕선
    • 암석학회지
    • /
    • 제17권2호
    • /
    • pp.83-94
    • /
    • 2008
  • 안동시 풍천면 지역은 선캠브리아기 변성암류, 쥬라기 화성암류, 백악기 퇴적암류 (하산동층, 진주층, 일직층), 그리고 백악기 화성암류 (반려암체, 암맥류) 등으로 구성되어 있으며, 몇몇 주요 단층들이 발달한다. 이들은 백악기 경상분지와 선캠브리아기-쥬라기 기반암류(영남육괴)의 경계단층에 해당하는 동북동 방향의 안동단층, 이에 평행한 남후단층, 북북서 방향의 매봉단층, 남남동 방향으로 볼록한 활형의 광덕단층, 북북동 방향의 하회단층 등이다. 이 논문에서는 층리, 절리, 단층, 끌림 습곡에 대한 상세한 기하적인 분석을 통하여 이들 주요 단층 주변지역의 지질구조를 연구하였다. 그 결과, 활형의 광덕단층과 그의 동부 연장선상에 발달하는 하회단층 주변에서 측정된 층리의 극점 배열로부터 상부가 남남동 방향으로 충상하는 단층운동에 수반된 광역적인 끌림습곡작용이 인지되며, 광덕단층의 서부와 하회단층에서는 비교적 폭이 좁고 광덕단층의 중부와 동부에서는 비교적 폭이 넓은 약 150 m-300 m 폭의 광덕 끌림습곡대가 설정된다. 이는 이전 연구결과와 달리 하회단층과 광덕단층은 하나의 단층으로써 그 운동성과 운동시기가 광덕단층과 동일함을 의미한다. 연구지역에는 두 종류의 방향 단층[(동)북동${\sim}$동서 방향(단충 I), 서북서${\sim}$북북서 방향(단층 II)과 네 종류의 방향절리 [동서(I), (북)북서 (II),북북동 (III), 북동 (IV) 방향 절리]가 인지되며, 이들은 적어도 다음과 같은 네 번의 변형단계를 걸쳐 형성되었다 (1) Dn 단계; 동서 방향의 압축 응력에 의한 절리 (I) (광덕절리)의 형성과 동서 방향의 산성질 암맥의 관입작용, (2) Dn+1 단계, (북)북서 방향의 압축 응력에 의한 절리 (II) (매봉절리) 형성, 산성질 암맥의 렌즈상 부딘작용, 광덕절리의 사교이동성 역단층운동 (단층 I-광덕단층 형성)과 이에 수반된 광역적인 광덕 끌림습곡대 형성, (3) Dn+2 단계; 북북동 방향의 압축 응력에 의한 절리 (III) 형성, 매봉절리의 우수 주향이동 단층운동 (단층 II-매봉단층 형성)과 이에 수반된 Dn+1 구조물의 연장성 단절작용, (4) Dn+3 단계; 북동 방향의 압축 응력에 의한 절리 (IV) 형성과 단층 II의 우수향 성분이 우세한 사교이동성 단층으로의 재활동 등이다. 이러한 연구결과는 매봉단층은 안동단층과 광덕단층의 충상 지구조운동과 관련된 인열단층이라기 보다는 이들 단층보다 후기에 생성되었음을 지시한다.

강원 지역에 분포하는 석회석 자원의 특성과 부존환경: 영월읍 북부 지역의 중기 석탄기 요봉층을 중심으로 (Characteristics and Distribution Pattern of Carbonate Rock Resources in Kangwon Area: The Middle Carboniferous Yobong Formation in the Northern Part of Yeongwoleup, Kangwon, Korea)

  • 박수인;이희권;이상헌
    • 한국지구과학회지
    • /
    • 제21권5호
    • /
    • pp.583-594
    • /
    • 2000
  • 강원도 영월읍 북부 지역의 영흥리 물암골, 속골 및 삼옥리 일대에는 중기 석탄기의 요봉층이 남북 방향으로 길게 분포한다. 특히, 요봉층 내에는 품위가 높은 석회암이 발달되어 있어 석회석 자원으로 활발히 개발되고 있다. 이 연구는 요봉층내의 석회암의 구성 입자와 조직 및 지화학적 특징, 그리고 석회암의 부존 상태를 규제하는 지질구조를 파악하기 위해 수행되었다. 요봉층의 석회암은 대체로 담회색 또는 담갈색의 세립 팩스톤(packstone)과 와케스톤(wackestone)으로 구성된다. 석회암의 구성 입자는 해백합, 유공충, 방추충, 개형충, 복족류 등의 다양한 생물 파편으로 이루어진다. 연구 지역의 요봉층 내 석회암의 CaO 함량은 48.12${\sim}$59.31% 범위이며, 평균 함량은 54.52%로 높다. MgO, Al$_2$O$_3$, Fe$_2$O$_3$ 및 SiO$_2$의 평균 함량은 0.32%, 0.05%,0.20%) 및 0.05%이다. 화학성분을 고려할 때 요봉층 석회암은 비교적 품위가 높은 석회암이다. 석회암의 Al$_2$O$_3$, Fe$_2$O$_3$및 SiO$_2$의 함량은 석회암의 암상, 층리의 발달 정도, 그리고 셰일층의 협재 등에 따라 변화 양상을 보이는 것이 특징적이다. 일반적으로 연구 지역에서 요봉층 석회암의 CaO 함량은 층의 상부로 갈수록 감소하는 경향을 나타낸다. 연구 지역에 분포하는 요봉층은 적어도 5회의 변형작용을 받은 것으로 밝혀졌으며, 이 중 첫 번째와 네 번째 변형작용 중에 생성된 습곡구조에 의해 요봉석회암의 부존상태가 크게 지배되는 것으로 파악되었다. 첫 번째 변형작용은 등사습곡과 엽리구조를 발달시켰다. 두 번째 변형작용에 의해 형성된 지질구조 요소인 노두 규모의 등사습곡은 조사 지역 전역에 걸쳐 발달되어 있지 않고 오직 요봉층의 녹색 이암 및 밤치층의 암회색 이암에만 발달되어 있다. 세 번째 변형작용에 의해 형성된F$_3$ 횡와습곡과 이와 관련된 S$_3$ 엽리구조 및 네 번째 변형작용 중에 생성된 노두 규모 및 지질도 규모의 F$_4$ 습곡구조, 그리고 다섯 번째 변형작용 중에 형성된 충상단층 및 이와 관련된 습곡구조가 연구 지역 전역에 걸쳐 연속적으로 인지된다.

  • PDF

입체선형의 주행속도를 고려한 편경사 안전율 산정에 관한 연구 (Estimation of the Superelevation Safety Factor Considering Operating Speed at 3-Dimensional Alignment)

  • 박태훈;김중효;박제진;박주원;하태준
    • 대한교통학회지
    • /
    • 제23권7호
    • /
    • pp.159-163
    • /
    • 2005
  • 도로를 건설하는 궁극적인 목적은 운전자의 편의성을 고려해야 함에도 불구하고 지금까지의 도로선형설계시 도로 이용자인 운전자를 고려하지 않고 있는 실정이다. 운전자의 편의성은 시간적 측면에서 정시성 및 신속성을 고려하고 있지만, 더불어 부가적으로 고려되어야 할 요소로서 사고에 대한 안전성을 감안해야만 한다. 본 연구에서는 지방부 일반국도 4차선 단곡선부의 1차로를 대상으로 입체선형의 주행속도특성을 고려한 편경사 안전율을 산정하고자 한다. 첫째, 기하구조의 영향을 분석하기 위해 선행차에 의해 영향을 받지 않은 승용차의 주행속도를 조사하였다. 둘째, 종단선형의 영향과 평면선형의 영향을 조합하여 6개 구간, 즉 12개 지점에서 주행속도를 측정하여 주행속도 특성을 기초 통계 분석하였다. 섯째, 기초 통계 분석 결과를 바탕으로 최대편경사를 새로운 안전율(${\alpha}$)개념을 도입하여 주행속도를 고려한 편경사값을 산정하였다. 연구결과, 입체선형에서 승용차의 주행특성을 알 수 있었고, 이를 고려한 안전율을 제시할 수 있었다. 최대편경사를 산정함에 있어 본 연구의 결과인 3차원적 입체선형을 고려한 안전율을 적용한다면 도로설계시 운전자의 안전성을 향상시킬 수 있을 것으로 판단된다. 더불어, 본 연구의 범위를 확장하여 다양한 기하구조를 가진 도로구간에 대한 수집 분석한 후, 3차원적 입체선형을 고려한 모델이 개발되어야 할 것으로 판단된다.

디지털미디어 환경(環境)에서 디자인 특성(特性)에 관한 연구(硏究) - 실내제품(室內製品) 디자인을 중심으로 - (A Destructive Method in the Connection of the Algorithm and Design in the Digital media - Centered on the Rapid Prototyping Systems of Product Design -)

  • 김석화
    • 조형예술학연구
    • /
    • 제5권
    • /
    • pp.87-129
    • /
    • 2003
  • The purpose of this thesis is to propose a new concept of design of the 21st century, on the basis of the study on the general signification of the structures and the signs of industrial product design, by examining the difference between modern and post-modern design, which is expected to lead the users to different design practice and interpretation of it. The starting point of this study is the different styles and patterns of 'Gestalt' in the post-modern design of the late 20th century from modern design - the factor of determination in industrial product design. That is to say, unlike functional and rational styles of modern product design, the late 20th century is based upon the pluralism characterized by complexity, synthetic and decorativeness. So far, most of the previous studies on design seem to have excluded visual aspects and usability, focused only on effective communication of design phenomena. These partial studies on design, blinded by phenomenal aspects, have resulted in failure to discover a principle of fundamental system. However, design varies according to the times; and the transformation of design is reflected in Design Pragnanz to constitute a new text of design. Therefore, it can be argued that Design Pragnanz serves as an essential factor under influence of the significance of text. In this thesis, therefore, I delve into analysis of the 20th century product design, in the light of Gestalt theory and Design Pragnanz, which have been functioning as the principle of the past design. For this study, I attempted to discover the fundamental elements in modern and post-modern designs, and to examine the formal structure of product design, the users' aesthetic preference and its semantics, from the integrative viewpoint. Also, with reference to history and theory of design my emphasis is more on fundamental visual phenomena than on structural analysis or process of visualization in product design, in order to examine the formal properties of modern and post-modern designs. Firstly, In Chapter 1, 'Issues and Background of the Study', I investigated the Gestalt theory and Design Pragnanz, on the premise of formal distinction between modern and post-modern designs. These theories are founded upon the discussion on visual perception of Gestalt in Germany in 1910's, in pursuit of the principle of perception centered around visual perception of human beings. In Chapter 2, I dealt with functionalism of modern design, as an advance preparation for the further study on the product design of the late 20th century. First of all, in Chapter 2-1, I examined the tendency of modern design focused on functionalism, which can be exemplified by the famous statement 'Form follows function'. Excluding all unessential elements in design - for example, decoration, this tendency has attained the position of the international style based on the spirit of Bauhause - universality and regularity - in search of geometric order, standardization and rationalization. In Chapter 2-2, I investigated the anthropological viewpoint that modern design started representing culture in a symbolic way including overall aspects of the society - politics, economics and ethics, and its criticism on functionalist design that aesthetic value is missing in exchange of excessive simplicity in style. Moreover, I examined the pluralist phenomena in post-modern design such as kitsch, eclecticism, reactionism, hi-tech and digital design, breaking away from functionalist purism of modern design. In Chapter 3, I analyzed Gestalt Pragnanz in design in a practical way, against the background of design trends. To begin with, I selected mass product design among those for the 20th century products as a target of analysis, highlighting representative styles in each category of the products. For this analysis, I adopted the theory of J. M Lehnhardt, who gradated in percentage the aesthetic and semantic levels of Pragnantz in design expression, and that of J. K. Grutter, who expressed it in a formula of M = O : C. I also employed eight units of dichotomies, according to the G. D. Birkhoff's aesthetic criteria, for the purpose of scientific classification of the degree of order and complexity in design; and I analyzed phenomenal aspects of design form represented in each unit. For Chapter 4, I executed a questionnaire about semiological phenomena of Design Pragnanz with 28 units of antonymous adjectives, based upon the research in the previous chapter. Then, I analyzed the process of signification of Design Pragnanz, founded on this research. Furthermore, the interpretation of the analysis served as an explanation to preference, through systematic analysis of Gestalt and Design Pragnanz in product design of the late 20th century. In Chapter 5, I determined the position of Design Pragnanz by integrating the analyses of Gestalt and Pragnanz in modern and post-modern designs In this process, 1 revealed the difference of each Design Pragnanz in formal respect, in order to suggest a vision of the future as a result, which will provide systemic and structural stimulation to current design.

  • PDF

사질토에 설치된 강성현장타설말뚝의 극한수평지지력 예측에 관한 재고 (A Review on Ultimate Lateral Capacity Prediction of Rigid Drilled Shafts Installed in Sand)

  • 조남준
    • 한국지반공학회논문집
    • /
    • 제21권2호
    • /
    • pp.113-120
    • /
    • 2005
  • 수평하중을 받는 현장타설말뚝을 합리적이고 경제적으로 설계하기 위해서 가장 중요한 것은 지구조 사이의 상호작용을 이해하는 것이다. 그러나 지난 수십년 동안 수평하중을 받는 깊은 기초의 거동에 대한 많은 연구가 있었음에도 불구하고, 문제의 성격상 삼차원적이며 비대칭성으로 인하여 더해지는 지반고유의 비선형성, 불균일성, 복잡성 때문에 극한수평지지력을 공식화하기란 매우 어렵다 본 연구에서는 특정한 현장조건, 기초의 기하학적 특성(D/B비),하중조건 등에 따른 많은 설계 방법들 중에서 가장 널리 알려진 네 가지의 방법(즉, Reese, Broms, Hansen, 그리고 Davidson)에 대해서 재검토하였다. 그리고 본 연구의 밀환으로 행한 모형실험으로 얻어진 하중-변위곡선을 쌍곡선으로 변환하여 해석된 방곡선수평지지력(H$_h$)과 위의 네 가지 방법들에 의하여 예측되는 극한수평지지력(H$_u$)을 비교하였다. Reese와 Hansen의 방법에 의해 구한 H$_u$ / H$_h$비는 각각 0.966와 1.015로서 실험결과와 매우 근사한 극한수평지지력을 제시하고 있다. 반면에 Davidson의 방법에 의해 구한 H$_u$는 에 비하여 $30\%$ 가량 큰 것으로 예측하고 있으나 네 가지 방법중에서 예측 수평지지력값에 대한 C.O.V.가 가장 작다. 네 가지 방법 중 가장 단순한 Broms의 방법은 H$_u$/ H$_h$: 0.896으로서 네 방법 중에서 극한 수평지지력을 가장 작게 평가하는 것으로 나타나지만 극한수평지지력값을 예측함에 있어서 가장 작은 S.D.를 보인다. 결론적으로, 네 가지의 방법 중 그 어 것도 극한수평지지력을 정확하게 예측한다는 면에서 다른 방법보다 더 우수하다고 할 수는 없다. 또한, 계산과정이 얼마나 정교하거나 복잡한 것과는 상관없이 극한수평지지력을 예측하는데 있어서 신뢰도는 또 다론 문제인 것 같다.

일라이트-스멕타이트 혼합층광물의 팽창성과 MacEwan 결정자 및 기본입자두께에 관한 연구 (Relationship between Expandability, MacEwan Crystallite Thickness, and Fundamental Particle Thickness in Illite-Smectite Mixed Layers)

  • 강일모;문희수;김재곤;송윤구
    • 한국광물학회지
    • /
    • 제15권2호
    • /
    • pp.95-103
    • /
    • 2002
  • 본 연구는 일라이트-스멕타이트 혼합층광물(I-S)의 구조를 MacEwan 결정자 모델과 기본입자 모델을 통하여 살펴봄으로써, 팽창성(% $S_{XRD}$), MacEwan 결정자두께( $N_{CSD}$), 평균기본입자두께( $N_{F}$ ) 간의 관계를 정량적으로 해석하고자 하였다. 두 모델에 대한 비교를 통하여, % $S_{XRD}$, $N_{CSD}$, $N_{F}$ 는 서로 독립된 변수들이 아니고 I-S 구조 내에서 특정한 기하학적 관계를 가지고 있음을 알 수 있었다. % $S_{XRD}$는 단범위적층효과에 의해 $N_{CSD}$에 영향을 받고, $N_{F}$ 및 스멕타이트 층간개수( $N_{S}$ )와 $N_{s}$ =( $N_{F-}$1)/(100%/% $S_{XRD-}$ $N_{F}$ ) 관계가 성립함을 알 수 있었다. 특히, 이 관계로부터 % $S_{XRD}$$N_{F}$ 는 물리적으로 제한된 조건인 1< $N_{F}$ <100%/ % $S_{XRD}$를 만족해야 한다는 결과를 도출할 수 있었다. 본 연구는 이러한 물리적 제한조건을 이용하여, % $S_{XRD}$, $N_{F}$ , $N_{s}$ , 질서도 등을 종합적으로 해석하는데 유용할 것으로 사료되는 다이어그램을 제시하였으며, 금성산화 산암복합체에서 산출되는 I-S에 대한 XRD 자료를 이용하여, 이를 검증하였다. 또한, 자연상 I-S는 % $S_{XRD}$가 감소할수록, $N_{F}$ 는 물리적 상한조건인 $N_{F}$ =100%/% $S_{XRD}$에서 점차 멀어지게 됨을 알 수 있었으며, 이러한 결과는 기본입자가 두꺼워질수록 적층능력이 감소하는 것에서 기인한 것으로 사료된다.다.하는 것에서 기인한 것으로 사료된다.다.

파랑에 의한 해저 사련 위에서의 유사입자의 거동 특성 (Sediment Particulate Motions Over a Ripple Under Different Wave Amplitude Conditions)

  • 장연식;안경모;황진환;박영규
    • 한국해안·해양공학회논문집
    • /
    • 제25권6호
    • /
    • pp.374-385
    • /
    • 2013
  • 부유 퇴적물의 입자 운동에 대한 수치실험이 굴곡이 있는 해저면 위에서 수행되었다. 해저면 경계층의 난류 유속장은 LES 난류모델을 사용하여 구현하였고, 난류 흐름 속에서의 퇴적물 입자운동은 Lagrangian 입자추적 모델을 사용하여 구현하였다. 수치실험을 통하여 두개의 다른 유속조건을 사용하였는데, 파랑주기를 비롯한 다른 모든 조건은 동일하게 유지한 가운데 오직 최대 유속만 다르게 하여 실험을 수행하였다. 예상한 것과 같이 부유되는 퇴적물 입자의 양은 유속이 강할 수록 증가하였다. 그러나 예상하지 못한 결과도 관측되었는데 그것은 비록 최대유속외에 다른 모든 조건은 동일하더라도 퇴적물이 부유되는 양상은 다르게 나타날 수 있다는 것이다. 특히 퇴적물이 부유하게 되는 시간이 위상평균한 파장 주기안에서 서로 다르게 나타나는 것이 발견되었는데, 이는 해저면 굴곡 주위에서 유속에 의해 생성되는 난류 와동의 생성시간이 다르기 때문에 일어나는 것으로 밝혀졌다. 이전의 연구에서도 알려진 바와 같이 이런 난류 와동들이 퇴적물의 부유현상에 미치는 영향은 지대한 것으로 확인되었으며, 또한 이런 와동들의 생성시간은 유속의 크기에 따라 달라 질 수 있음이 밝혀졌다. 이로인해 해저면 굴곡 위에서 퇴적물의 부유현상을 보다 정확하게 규명하기 위해서는 파랑의 여러가지 복잡한 변수들을 고려하여야 함이 이번 실험을 통하여 입증되었다. 또한 퇴적물 입자의 부유에 영향을 미치는 난류 에너지분포 역시 생성된 난류 와동에 많은 영향을 받는 것으로 나타났다. 이번 연구를 통하여 유속의 세기변화 만으로도 퇴적물이 부유되는 시간이 굴곡이 있는 해저면에서 바뀔 수 있는 것으로 확인되었으며, 이는 향후 퇴적물 부유에 대한 연구를 할때 해저면 구조와 유속구조의 상관관계를 보다 신중히 검토해야 함이 밝혀졌다.