• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.11
• /
• pp.118-125
• /
• 1997

Non-contacting optical microscopes are increasingly used in recent industrial applications of probes for coordinate measuring machines. They have been found more efficient than conventional touch trigger porbes with ball tips especially in inspecting small-sized objects. There are two major factors affecting measuring accuracy: (1) geometric relations between coordinate systems, (2) magnification ratios of a microscope. In order to determine the magnification ratios exactly, optical imaging of edge was theroretically analyzed and practically adopted to image processing for edge detection. In addition, this paper proposes a geometric calibration method to obtain exact coordinates of measured points from the relations between the machine coordinate system and the image. In the method, the error according to the squareness between the machine axises was also removed. The method was practically adopted to a real coordinate measuring machine. An ultraprecision measurement of 0.2 um uncertainty can be practically achieved.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1993.10a
• /
• pp.149-154
• /
• 1993

In heavy grinding that is on of the high efficient grinding method, meaningful deformation is generated by high temperature. So, after machining, geomeric error generated od the workpiece. The most important factor on the geometric error is temperature difference between upper layer and lower layer (T $_{d}$) . Relations between Td and grinding condition and maximum geometric error and grinding condition are obtained by experiment. This relations are used in fuzzy algorithm for improvement geometric accuracy. The main results are follows : (1) The linear relation between maximum geometric error and grinding condition is ovtained by experiment. (2) The linear relation between maximum temperature difference between upper layer and lower layer and grinding condition is ovtained by experiment. (3) Control peth of wheel for improvement geometric accuracy is obtained by using the fuzzy algorithm.m.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.31 no.1 s.256
• /
• pp.105-112
• /
• 2007

The linkage framework of geometric modeling based on NURBS(Non-Uniform Rational B-Spline) surface and shell finite analysis is developed in the present study. For this purpose, geometrically exact shell finite element is implemented. NURBS technology is employed to obtain the exact geometric quantities for the analysis. Especially, because NURBS is the most powerful and wide-spread method to represent general surfaces in the field of computer graphics and CAD(Computer Aided Design) industry, the direct computation of surface geometric quantities from the NURBS surface equation without approximation shows great potential for the integration between geometrically exact shell finite element and geometric modeling in the CAD systems. Some numerical examples are given to verify the performance and accuracy of the developed linkage framework. In additions, trimmed surfaces with some cutouts are considered for more practical applications.

• Journal of KSNVE
• /
• v.6 no.6
• /
• pp.735-747
• /
• 1996

In this paper, buckling reliability analyses of stiffened cylinder with random initial geometric imperfection under axial impact load are performed by the combined response surface method. The effect of random geometric imperfection on the failure probability and reliability is recognized quantitatively. Buckling reliability decreases with the increase of mean value, cov of initial geometric imperfection under the same external load. Buckling probability under impact load is greater than those under static load with the same condition. From the probabilistic characteristics of imapct buckling load, relation between reliability index and safety parameter can be obtained in addition to the relation between load and reliability index. And those results can be used to determine the range of required safety parameter and acceptable imperfaction.

• Korean Journal of Computational Design and Engineering
• /
• v.9 no.1
• /
• pp.19-26
• /
• 2004

It is not possible to exchange parametric information of CAD models based on the current version of STEP (Standard for the Exchange of Product model data). The designer intents are lost during the transfer of CAD models. To resolve this problem, the macro-parametric approach had been proposed. To enable this approach, a set of standard modeling commands has been defined. Errors or missing elements of the standard modeling commands can be discovered by implementing macro-parametric translators. But there is a limit to discover problems only by using translators. This paper proposes a method to verify the standard modeling commands by implementing a geometric modeler. First, each argument of a modeling command is verified. Second, the set of the standard modeling commands is applied to geometric modeling of commercially available product parts. For the geometric modeling, nine test models have been selected.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.59 no.3
• /
• pp.258-262
• /
• 2010

This paper describes a watermarking system that has the robust characteristics against the geometric attacks of resizing and the bitrate varying attacks. While the existing watermark methods of marking on AC in DCT coefficients are weak against the geometric attacks, the methods of tiny increasing the DC in DCT coefficients and the system implementations are suggested in this paper. We measure the differences between the original images and the watermarked images and the detecting rate from the geometric and bitrate attacked images. Results of experiments show that our method is robust against that attacks.

• Computers and Concrete
• /
• v.15 no.3
• /
• pp.373-389
• /
• 2015

The development of a finite element model for the geometric and material nonlinear analysis of bonded prestressed concrete continuous beams is presented. The nonlinear geometric effect is introduced by the coupling of axial and flexural fields. A layered approach is applied so as to consider different material properties across the depth of a cross section. The proposed method of analysis is formulated based on the Euler-Bernoulli beam theory. According to the total Lagrangian description, the constructed stiffness matrix consists of three components, namely, the material stiffness matrix reflecting the nonlinear material effect, the geometric stiffness matrix reflecting the nonlinear geometric effect and the large displacement stiffness matrix reflecting the large displacement effect. The analysis is capable of predicting the nonlinear behaviour of bonded prestressed concrete continuous beams over the entire loading stage up to failure. Some numerical examples are presented to demonstrate the validity and applicability of the proposed model.

• Steel and Composite Structures
• /
• v.47 no.6
• /
• pp.795-811
• /
• 2023

When studying the resonance problem of nanoplates, the existing papers do not consider the influences of geometric nonlinearity and initial geometric imperfection, so this paper is to fill this gap. In this paper, based on the nonlocal strain gradient theory (NSGT), the nonlinear resonances of functionally graded (FG) nanoplates with initial geometric imperfection under different boundary conditions are established. In order to consider the small size effect of plates, nonlocal parameters and strain gradient parameters are introduced to expand the assumptions of the first-order shear deformation theory. Subsequently, the equations of motion are derived using the Euler-Lagrange principle and solved with the help of perturbation method. In addition, the effects of initial geometrical imperfection, functionally graded index, strain gradient parameter, nonlocal parameter and porosity on the nonlinear forced vibration behavior of nanoplates under different boundary conditions are discussed.

• The KIPS Transactions:PartB
• /
• v.11B no.7 s.96
• /
• pp.813-820
• /
• 2004

This paper proposes a digital image watermarking which is robust to geometric distortions using an independent component analysis(ICA) of fixed-point(FP) algorithm based on secant method. The FP algorithm of secant method is applied for better performance in a separation time and rate, and ICA is applied to reject the prior knowledges for original image, key, and watermark such as locations and size, etc. The proposed method embeds the watermark into the spatial domain of original image The proposed watermarking technique has been applied to lena, key, and two watermarks(text and Gaussian noise) respectively. The simulation results show that the proposed method has higher speed and better rate for extracting the original images than the FP algorithm of Newton method. And the proposed method has a watermarking which is robust to geometric distortions such as resizing, rotation, and cropping. Especially, the watermark of images with Gaussian noise has better extraction performance than the watermark with text since Gaussian noise has lower correlation coefficient than the text to the original and key images. The watermarking of ICA doesn't require the prior knowledge for the original images.

• The Journal of the Korea Contents Association
• /
• v.4 no.3
• /
• pp.107-113
• /
• 2004

This paper improved the performance of the face recognition system using the PCA/LDA hybrid method based on the facial geometric feature and the Wavelet transform. Because the previous PCA/LDA methods have measured the similarity according to the formal dispersion, they could not reflect facial boundaries exactly In order to recover this defect, this paper proposed the method using the distance between eyes and mouth. If the difference of the measured distances on the query and the training images is over the given threshold, then the method reorders the candidate images according to energy feature vectors of eyes, a nose, and a chin. To evaluate the performance of the proposed method the computer simulations have been performed with four hundred facial images in the ORL database. The results showed that our method improves about 4％ recognition rate over the previous PCA/LDA method.