• 대한기계학회논문집
• /
• 제18권8호
• /
• pp.1985-1996
• /
• 1994

A new design method of sliding hyperplanes is proposed in the synthesis of a variable structure controller for robust tracking of general nonlinear multi-input-output(MIMO) uncertain systems of relative degree higher than two. Input/ output(I/O) linearzation is firstly undertaken by employing the concept of relative degree and minimum phase followed by the construction of sliding mode controllers. Sliding hyperplanes are then derived from the inherent properties of companion matrix and ideal sliding mode characterized in I/O linearized system. Subsequently, the gradient magnitudes of the sling hyperplanes are determined in an optimal manner by considering a quadratic performance index to be evaluated at two phases; a reaching phase and a sliding phase. The proposed design methodology is relatively straightforward and systematic compared with conventional strategies such as geometric approach or pole assignment technique. A nonlinear governor and exciter control problem for a power system is adopted herein in order to demonstrate the design efficiency and also favorable and robust control performances.

• 한국정밀공학회지
• /
• 제18권6호
• /
• pp.93-101
• /
• 2001

This paper presents modeling of an inductive micro position sensing system and its analysis. The parameters affected the system response are excitation frequency, turn ratio, input position, air-gap size, load resistance, and geometric dimensions. To analyze the system, we try to establish a modeling based on an equivalent magnetic circuit with permeances. The model is verified by the experimental results from 1 kHz to 20 kHz. The magnetic circuit model is well fitted to the experimental data except a little error due to LC resonance in the large turn-ratio system. Modeling enables us to theoretically approach the response characteristics. Based on the magnetic circuit model, system parameters can be selected in such a way to obtain the required characteristics such as high sensitivity, good linearity, or small size.

• 한국정밀공학회지
• /
• 제22권9호
• /
• pp.77-84
• /
• 2005

In most vision applications, we are frequently confronted with determining the position of object continuously. Generally, intertwined processes ire needed for target tracking, composed with tracking and control process. Each of these processes can be studied independently. In case of actual implementation we must consider the interaction between them to achieve robust performance. In this paper, the robust real time visual tracking in complex background is considered. A common approach to increase robustness of a tracking system is to use known geometric models (CAD model etc.) or to attach the marker. In case an object has arbitrary shape or it is difficult to attach the marker to object, we present a method to track the target easily as we set up the color and shape for a part of object previously. Robust detection can be achieved by integrating voting-based visual cues. Kalman filter is used to estimate the motion of moving object in 3D space, and this algorithm is tested in a pan/tilt robot system. Experimental results show that fusion of cues and motion estimation in a tracking system has a robust performance.

• 대한교통학회지
• /
• 제19권3호
• /
• pp.133-144
• /
• 2001

본 연구에서는 대규모 네트워크에 적용 가능한 미시적 교통류 시뮬레이션 모형을 개발하였다. 본 연구는 대규모 가로망에 대한 미시적 교통류 시뮬레이션 시스템개발의 첫 번째 단계로, 연속류 구간을 중심으로 우리나라의 가로망 구조, 차량 주행행태에 적합한 미시적 교통류 시뮬레이션 모형개발에 초점을 두었다. 차량 전이 모형으로는 Cellular Automata 모형(CA모형)을 기반으로 하였으며, 기존의 CA모형 중 교통공학적 측면에서 문제가 있다고 판단되는 부분에 대해서는 새로운 모형을 개발하거나 수정하여 적용하였다. 개발된 모형의 모의실험을 통해 기존의 거시적 교통류 시뮬레이션 모형에서 설명할 수 없었던 여러 교통현상(합류, 차로축소, 분류등으로 유발되는 교통현상)을 설명할 수 있는 것으로 확인되었고, 또한 본 모형은 우리나라의 가로망구조에 기반을 두고 개발되었기 때문에 기존에 외국에서 개발된 미시적 시뮬레이션 모형이 표현하지 못했던 가로망에 대한 교통류 시뮬레이션이 가능한 것으로 나타났다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.818-821
• /
• 2004

With a rapid development in the area of micro and ultra precision technology, the micro surface machining of small size parts are explosively increased. Especially, to improve efficiency of various beams in lens and reflector, non-rotational symmetric form and several mm level heights changeable surface can be machined at a time. These geometric complex 3D surface cannot be machined by general short stroke FTS. The long stroke FTS if firmly needed to move directly several mm and have nm level positioning accuracy for the complex surface form. The long stroke FTS used linear motors to drive moving unit long and fine, aero static bearings to decrease friction and moving errors in guide way, optical linear scale with nm level resolution to measure position of FTS. Furthermore, to increase the performance of acceleration of FTS, the light material, such as AL is used for the structure and the high stiffness box type structure is selected. In this paper, the genetic algorithm approach is described to determine a set of design parameters for auto tuning. The authors have attempted to model the design problem with the objective of minimizing the error, such as variable pattern change. This method can give the better alternative than existing other method.

• 한국군사과학기술학회지
• /
• 제18권5호
• /
• pp.594-601
• /
• 2015

The purpose of this research is to propose a maintenance support system for deciding assembly sequence of the product and appropriate tools that are used to assembly and disassembly of parts in the product when geometric properties of the product. The digital maintenance system (DMS) is developed to generate the maintenance guideline and the initial experiment is conducted especially for an underwater weapon system with cylindrical structure. DMS considers four factors to find the efficient assembly and disassembly procedure automatically: (1) assembly tree, (2) properties of each part, (3) distance from the center of the product, and (4) volume. Based on the factors, DMS simulate the movement of each tool virtually and the properties of tools are investigated to find an appropriate tool for using assembly and disassembly of each part in the product. The proposed approach integrates modeling, simulation, data configuration, and virtual reality to allow a development of preliminary maintenance guidance.

• 한국실내디자인학회:학술대회논문집
• /
• 한국실내디자인학회 2006년도 춘계학술발표대회 논문집
• /
• pp.224-228
• /
• 2006

Recently, In Korea, diverse elderly facilities have increased by geometric progression cope with rapidly aging society. But, there haven't been enough systematic understanding about elderly housing. To approach the concept of elderly housing, the clear theory of its definition and types should be established. Thus, the purpose of this study is to set up the concept of elderly housing and clear definition, and to recreate criteria fit our situation. This study was proceeded by contents analysis of elderly housing environment in prior research. First, we understand the use of terms about elderly housing in references and redefine. Then, analyze the cases of categorizations in developed countries. Finally, the research point out current problems and make criteria in housing environmental aspects. This study leads new perspective to consist synthetic services according to special conditions of elderly, far from the economical point of view. It will contribute to understand elderly housing designing aging friendly environment.

• 한국항공우주학회지
• /
• 제36권10호
• /
• pp.988-995
• /
• 2008

본 논문에서는 궤환선형화를 이용한 일치기법을 사용하여 다수 무인기의 편대비행 제어기를 설계하였다. 제안한 기법은 한 대의 리더기를 중심으로 하는 집중형 방식이 아닌 분산형 방식으로, 각 개체의 제어입력은 인접한 개체만의 정보만을 이용하여 설계된다. 라플라시안 행렬을 이용하여 개체 간의 정보 교류를 정의한 후, 궤환선형화 과정을 거친 비행체에 적용하였다. 또한, 본 논문에서 제안한 제어기의 안정성 해석을 수행하였다. 또한 제안한 제어기의 성능을 검증하기 위해서 회전익 무인기 비행체 모델에 대한 수치 시뮬레이션을 수행하였다.

• 한국실내디자인학회논문집
• /
• 제23권5호
• /
• pp.3-13
• /
• 2014

Typology in Contemporary Architecture wants to escape from the classical typology that has the problems about specific program of structuralism, typical repeatation of customary form. As visible and non-visible things are appeared in contemporary architecture through the analysis of the inner system involving development process of changing itself, typology of contemporary is utilized at a tool of form generation in the process of architect. And it notes that the structural properties of the building system. The form of contemporary architecture has the new connecting strucure not reduced to existing ones. It carries out generative access as a device in order to solve the complexity of society. From this perspective, we analyze the process of projects of contemporary architects that can be typological strategy not representation of post geometric form but a tool of form generation in architectural process. As a result, we can find four characteristics of typology as a tool of form generation; 'interference and mix of program', 'continous slabs', 'rearrangement through relationship setting', 'transformation of multi-layers'. These are expanding to the process that reflect history and context or infer from morphology. Therefore, typology as architectural process of form generation overcomes morphological typology of classical typology and suggests that the different architectural approach having potential possibility.

• Structural Engineering and Mechanics
• /
• 제43권6호
• /
• pp.725-737
• /
• 2012

The temperature on steel structures is larger than the ambient air temperature under solar radiation and the temperature distribution on the affected structure is non-uniform and complicated. The steel tube, as a main structural member, has been investigated through experiment and numerical analysis. In this study, the temperature distribution on a properly designed steel tube under solar radiation is measured. A finite element transient thermal analysis method is presented and verified by the experimental results and a series of parametric studies are carried out to investigate the influence of various geometric properties and orientation on the temperature distribution. Furthermore, a simplified approach is proposed to predict the temperature distribution of steel tube. Based on both the experimental and the numerical results, it is concluded that the solar radiation has a significant effect on the temperature distribution of steel tubes. Under the solar radiation, the temperature of steel tubes is about $20.6^{\circ}C$ higher than the ambient air temperature. The temperature distribution of steel tubes is sensitive to the steel solar radiation absorption, steel tube diameter and orientation, but insensitive to the solar radiation reflectance and thickness of steel tube.