• 대한원격탐사학회지
• /
• 제13권2호
• /
• pp.85-98
• /
• 1997

본 논문에서는 현재 고해상도 위성 영상을 촬영하는 대부분의 카메라인 pushbroom형태 의 선형 CCD카메라의 기하학적 모델 및 좌표변환 과정을 제안한다. 제안되는 모델은 원시 영상 자표계로 부터 지도 좌표계까지의 정함수 변환 뿐아니라 반대 방향의 역함수 변환도 포함한다. 실제로 resampling의 용이성이나 구현의 효율성을 감안할 때 역함수 변환이 사용되어야 하지만, pushbroom형태의 영상일 경우 그 촛점의 위치가 시간에 따라 변화하므로 역함수 변환 함수가 단 순한 수학적 형태로 성립될 수 없다. 따라서 이 논문에서는 반복 연산과 수렴을 통한 역함수 변 환의 유도를 제안한다. 제안되는 기하학적 모델은 모든 선형 CCD 위성영상에 적용될 수 있으나 본 논문에서는 유도의 편이성을 위해 현재 비행모델을 제작 중이며 1998년 후반에 발사 예정인 우리별 3호의 고해상도 카메라 영상에 촛점을 맞추었다.

• Structural Engineering and Mechanics
• /
• 제35권2호
• /
• pp.127-140
• /
• 2010

This paper focuses on a number of criteria that enable controlling the influence of geometric simplification on the quality of finite element (FE) computations. To perform the mechanical simulation of a component, the corresponding geometric model typically needs to be simplified in accordance with hypotheses adopted regarding the component's mechanical behaviour. The method presented herein serves to compute an a posteriori indicator for the purpose of estimating the significance of each feature removal. This method can be used as part of an adaptive process of geometric simplification. If a shape detail removed during the shape simplification process proves to be influential on mechanical behaviour, the particular detail can then be reinserted into the simplified model, thus making it possible to readapt the initial simulation model. The fields of application for such a method are: static problems involving linear elastic behaviour, and linear thermal problems with stationary conduction.

• Wind and Structures
• /
• 제5권2_3_4호
• /
• pp.267-276
• /
• 2002

Research being undertaken at the University of Auckland has enabled Vortec Energy to improve the performance of the Vortec 7 Diffuser Augmented Wind Turbine. Computational Fluid Dynamic (CFD) modelling of the Vortec 7 was used to ascertain the effectiveness of geometric modifications to the Vortec 7. The CFD work was then developed to look at new geometries, and refinement of these led to greater power augmentation for a given diffuser exit area ratio. Both full scale analysis of the Vortec 7 and a wind tunnel investigation of the development design have been used for comparison with the CFD model.

• 유공압시스템학회논문집
• /
• 제4권2호
• /
• pp.1-6
• /
• 2007

During the last few decades, excavation automation has been investigated to protect the operator from the hazardous working environment and to relieve the cost of the skilled operator. Therefore, a number of modelling and controller design methods of the hydraulic excavator are proposed in many literatures to realize the excavation automation. In this article, a geometric approach far the multi-body system modeling is adopted to develop the excavator mechanism model that contains 4 kinematic loops and 12 links. Considering a simple soil mechanism model with a number of uncertain soil parameters, an adaptive trajectory tracking control strategy based on the developed excavator model is proposed. The improved performance of the designed controller over the simple PID controller is validated via the simulation study.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 1998년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.252-256
• /
• 1998

Accurate mapping of satellite images is one of the most important Parts in many remote sensing applications. Since the position and the attitude of a satellite during image acquisition cannot be determined accurately enough, it is normal to have several hundred meters' ground-mapping errors in the systematically corrected images. The users which require a pixel-level or a sub-pixel level mapping accuracy for high-resolution satellite images must use a number of Ground Control Points (GCPs). In this paper, the performance of two geometric correction algorithms is tested and compared. One is the polynomial warping algorithm which is simple and popular enough to be implemented in most of the commercial satellite image processing software. The other is full camera modelling algorithm using Physical orbit-sensor-Earth geometry which is used in satellite image data receiving, pre-processing and distribution stations. Several criteria were considered for the performance analysis : ultimate correction accuracy, GCP representatibility, number of GCPs required, convergence speed, sensitiveness to inaccurate GCPs, usefulness of the correction results. This paper focuses on the usefulness of the precision correction algorithm for regular image pre-processing operations. This means that not only final correction accuracy but also the number of GCPs and their spatial distribution required for an image correction are important factors. Both correction algorithms were implemented and will be used for the precision correction of KITSAT-3 images.

• 지질공학
• /
• 제1권1호
• /
• pp.137-145
• /
• 1991

열극암반에서의 유동특성은 석유산업, 지열수탐사, 지하수의 오염문제, 지하 동굴건설 등 많은 공학적 분야에서 선결되어야 하는 중요성을 갖고 있다. 암반을 통한 지하수의 유동은 연속체 개념과 불연속열극 개념에 의하여 수치모형화 되고 또한 해석되고 있다. 불연속 열극체계 개념은 국지적인 각 열극의 특성을 강조하는 반면, 다공성매질 개념은 수리학적 파라메타의 평균값을 쓰기 때문에 각 열극의 특성은 무시하게 된다. 지하동굴에서 관찰된 지하수 유입특성에 의하면, 지하수는 channel 형태로 유동한다고 해석되어지고 있다. 이러한 channel 현상은 복합적인 열극의 기하학적 특성에 따른 열극틈의 변화에 의하여 이루어 진다.

• International Journal of CAD/CAM
• /
• 제3권1_2호
• /
• pp.67-75
• /
• 2003

Viewpoint-dependent feature-based modelling in computer-aided design is developed for the purposes of supporting engineering design representation and automation. The approach of this paper uses a combination of a multi-level modelling approach. This has two stages of mapping between models, and the multi-level model approach is implemented in three-level architecture. Top of this level is a feature-based description for each viewpoint, comprising a combination of form features and other features such as loads and constraints for analysis. The middle level is an executable representation of the feature model. The bottom of this multi-level modelling is a evaluation of a feature-based CAD model obtained by executable feature representations defined in the middle level. The mappings involved in the system comprise firstly, mapping between the top level feature representations associated with different viewpoints, for example for the geometric simplification and addition of boundary conditions associated with moving from a design model to an analysis model, and secondly mapping between the top level and the middle level representations in which the feature model is transformed into the executable representation. Because an executable representation is used as the intermediate layer, the low level evaluation can be active. The example will be implemented with an analysis model which is evaluated and for which results are output. This multi-level modelling approach will be investigated within the framework aimed for the design automation with a feature-based model.

• Wind and Structures
• /
• 제13권4호
• /
• pp.363-374
• /
• 2010

Appropriate scaling methods for wind tunnel modelling of building internal pressures induced through a dominant opening were investigated. In particular, model cavity volume distortion and geometric scaling of the opening details were studied. It was found that while model volume distortion may be used to scale down buildings for wind tunnel studies on internal pressure, the implementation of the added volume must be done with care so as not to create two cavity resonance systems. Incorrect scaling of opening details was also found to generate incorrect internal pressure characteristics. Furthermore, the effective air slug or jet was found to be longer when the opening was near a floor or sidewall as evidenced by somewhat lower Helmholtz frequencies. It is also shown that tangential flow excitation of Helmholtz resonance for off-centre openings in normal flow is also possible.

• 대한기계학회논문집A
• /
• 제26권9호
• /
• pp.1814-1821
• /
• 2002

NC cutting simulation is an important factor in the development of products. The geometric modelling of cutter swept surface should be done in NC cutting simulation. A part of cutter swept surface is a ruled surface blended with silhouette curve and cutter path. Finding an intersection point between cutter swept surface and a line is one of major problems in Z-map based cutting simulation. In this paper, cutter swept surface is defined parametrically and it's intersection point with Z-map is found in an exact form. Triangular grid Z-map based 3-axis NC cutting simulation is performed.

• Earthquakes and Structures
• /
• 제12권3호
• /
• pp.359-374
• /
• 2017

The seismic events in Northern Italy, May 2012, have revealed the seismic vulnerability of typical Italian precast industrial buildings. The aim of this paper is to present a seismic fragility model for Italian RC precast buildings, to be used in earthquake loss estimation and seismic risk assessment by comparing two building typologies and three different codes: D.M. 3-03-1975, D.M. 16-01-1996 and current Italian building code that has been released in 2008. Based on geometric characteristics and design procedure applied, ten different building classes were identified. A Monte Carlo simulation was performed for each building class in order to generate the building stock used for the development of fragility curves trough analytical method. The probabilistic distributions of geometry were mainly obtained from data collected from 650 field surveys, while the material properties were deduced from the code in place at the time of construction or from expert opinion. The structures were modelled in 2D frameworks; since the past seismic events have identified the beam-column connection as the weakest element of precast buildings, two different modelling solutions were adopted to develop fragility curves: a simple model with post processing required to detect connection collapse and an innovative modelling solution able to reproduce the real behaviour of the connection during the analysis. Fragility curves were derived using both nonlinear static and dynamic analysis.