• 한국정밀공학회지
• /
• 제11권4호
• /
• pp.58-68
• /
• 1994

An equilibrium approach is suggested as an effective tool for the analysis of sheet metal forming processes on the basis of force balance together with geometric relations and plasticity theroy. In computing a force balance equation, it is required to define a geometric curve approximating the shape of the sheet metal at any step of deformation from the geometric interaction between the die and the deforming sheet. Then the geometic informations for contacting and non-contacting sections of the sheet metal such as the number and length of both non-contact region, contact angle, and die radius of contact section are known from the geometric forming curve and utilized for optimization by force balance equation. In computation, the sheet material is assumed to be of normal amisotropy and rigid-phastic workhardening. It has been shown that there are good agreements between the equilibrium approach and FEM computation for the benchmark test example and auto-body panels whose sections can be assumed in plane-strain state. The proposed equilibrium approach can thus be used as a robust computational method in estimating the forming defects and forming severity rather quickly in the die design stage.

• 한국공간구조학회논문집
• /
• 제12권2호
• /
• pp.81-88
• /
• 2012

텐세그리티 구조시스템의 한 종류인 케이블 돔 시스템은 케이블과 마스트로 이루어져 있다. 이 케이블에 외부하중이 가해지지 않은 상태에서 안정된 구조물이 되기 위하여 일정의 프리텐션이 가해져야 하며 구조물은 가해진 프리텐션 하에서 자기평형응력상태에 있어야 한다. 본 연구에서는 부재의 내력 벡터의 합 원리를 기초하여 자기평형 응력모드를 구하는 새로운 방법을 제안하였으며, 자기평형응력을 유지하기 위해 필요한 응력모드를 시각화할 수 있다는 점이 기존의 논문과 비교하여 독특성을 갖는다. 본 연구에서 제안된 방법에서 사용된 기본 원리는 모든 절점에서 외부하중이 가해지지 않은 상태에서 내력벡터의 합은 0이 되어야 한다는 것이다. 제안된 방법은 CAD를 이용하여 간단히 자기 평형응력모드를 찾을 수 있으며, 예제 케이블 돔 구조물을 대상으로 각 절점에 연결된 부재들의 내력을 결정하였다. 결과 값은 역학적 계산 방법과 기존의 이론에 의해 검증하였으며 잘 일치하였다.

• 소성∙가공
• /
• 제7권6호
• /
• pp.594-602
• /
• 1998

The design analysis of axisymmetric, multi-stage deep drawing dies was performed using the rigid-viscoplastic finite element formulation. In the formulation the axisymmetric CFS algorithm was employed. Hill's non-quadratic normal anisotropic yield criterion and isotropic hardening rule were considered. For trial initial displacements and tool contact points. the geometric force equilibrium method was adopted. In order to see the validity of the formulation, the multi-stage deep drawing processes of shell-cylinder front part of hydraulic booster were simulated. The simulation showed good agreements with measurments and PAM-STAMP results.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1999년도 춘계 학술발표회 논문집 Proceedings of EESK Conference-Spring
• /
• pp.292-299
• /
• 1999

In order to investigate dynamic behaviors of marine cables under wave and earthquake forces a geometric nonlinear. F, E formulation of marine cables is presented and tangent stiffness and mass matrices for the isoparametric cable element are derived, The initial equilibrium state of cables subjected to self -weights and current forces is determined and free vibration and dynamic nonlinear analysis of cable structures under additional environmental loads are performed based on the initial configuration Challenging examples are presented and discussed in order to demonstrate the feasibility of the present finite element method and investigate dynamic nonlinear behaviors of marine cables.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 추계학술대회 논문집
• /
• pp.212-217
• /
• 1993

A 2-dimensional FEM/GEM program was developed for analyzing forming processes of an arbitrarily shaped draw-die, in which plane strain condition is assumed and linear line elements are employed. FEM formulation adopted a new algorithm for solving force equilibrium as well as non-penetration condition simultaneously. For the case of numerical divergence at nearly final forming stages and the initial guess in Newton-Raphson iterations, geometric force equilibrium method(GEM) is also introduced. The developed program was tested with the simulation of stamping processes of automotive bonnet inner pannel in order to verify the usefulness and validity of FEM/GEM formulation.

• 한국정밀공학회지
• /
• 제13권3호
• /
• pp.80-93
• /
• 1996

A 2-dimensional FEM/GEM program was developed under the plane strain assumption using linear line elements for analyzing stretch/draw forming operations of an arbitrarily shaped draw-die. FEM formulation adopted a new algorithm for solving force equilibrium as well as non-penetration condition simultaneously. Also, a rigid-viscoplastic material model with Hill's normal anisotropic yield condition and rate-sensitive hardening law is assumed, along with the Coulomb friction law in the contact regions. For the case of numerical divergence at nearly final forming stages, geometric force equilibrium method(GEM) is also introduced. The developed program was tested by simulating the forming processes of cylindrical punch/open die, and the drawing processes of automotive oilpan and hood inner panel in order to verify the usefulness and validity of FEM/GEM formulation. The numerical simulation verified the validity and robustness of developed program.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1998년도 제2회 박판성형심포지엄 논문집 박판성형기술의 현재와 미래
• /
• pp.65-73
• /
• 1998

The design analysis of axisymmetric, multi-stage deep drawing dies was performed using the rigid-viscoplastic finite element formulation. In the formulation, the axisymmetric CFS algorithm was employed. Hill's non-quadratic normal anisotropic yield criterion and isotropic hardening rule were considered. For trial initial displacements and tool contact points, the geometric force equilibrium method was adopted. In order to see the validity of the formulation, the multi-stage deep drawing processes of shell-cylinder front part of hydraulic booster were simulated. The simulation showed good agreements with measurements and PAM-STAMP.

• 한국강구조학회 논문집
• /
• 제23권2호
• /
• pp.237-247
• /
• 2011

현수교의 초기평형상태를 결정하기 위한 개선된 초기부재력법을 제시한다. 먼저 현수교의 주케이블과 행어가 만나는 절점에서 힘의 평형조건을 이용하여 초기평형상태를 결정한 뒤, 이 때 계산된 주 케이블의 절점좌표와 각 케이블 부재의 무응력장을 입력 값으로 하여 초기부재력을 도입한 비선형 해석을 수행하였다. 일반적인 초기부재력법의 경우 각 단계에서 계산된 부재력을 통하여 케이블의 무응력장을 재산정하지만, 본 연구에서는 각 케이블 부재의 무응력장을 매 계산 단계에서 고정된 값으로 취한다. 2차원 및 3차원 현수교 모델에 공통적으로 적용할 수 있다. 수치예제 결과 값의 비교를 통하여 연구의 타당성을 검증하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.814-819
• /
• 2004

In this paper, a modeling method for the vibration analysis of rotating structures employing multi-reference frames is presented. The geometric stiffening effect that results from centrifugal inertia force is considered. In most previous studies single reference frame has been employed for the analysis. In the present study, a modeling method employing multi-reference frames is presented, and the effects of employing multi-reference frames on the analysis accuracy are investigated through solving numerical examples.

• 한국소음진동공학회논문집
• /
• 제14권10호
• /
• pp.983-989
• /
• 2004

In this paper, a modeling method for the vibration analysis of rotating structures employing multi-reference frames is presented. The geometric stiffening effect that results from centrifugal inertia force is considered. In most previous studies single reference frame has been employed for the analysis. In the present study, a modeling method employing multi-reference frames is presented, and the effects of employing multi-reference frames on the analysis accuracy are investigated through solving numerical examples.