• Steel and Composite Structures
• /
• 제23권5호
• /
• pp.611-621
• /
• 2017

This paper presents an investigation on the fire resistance of high strength fiber reinforced concrete filled box columns (CFBCs) under combined temperature and loading. Two groups of full-size specimens were fabricated. The control group was a steel box filled with high-strength concrete (HSC), while the experimental group consisted of a steel box filled with high strength fiber concrete (HFC) and two steel boxes filled with fiber reinforced concrete. Prior to fire test, a constant compressive load (i.e., load level for fire design) was applied to the column specimens. Thermal load was then applied on the column specimens in form of ISO 834 standard fire curve in a large-scale laboratory furnace until the set experiment termination condition was reached. The test results show that filling fiber concrete can improve the fire resistance of CFBC. Moreover, the configuration of longitudinal reinforcements and transverse stirrups can significantly improve the fire resistance of CFBCs.

• 한국공간정보시스템학회:학술대회논문집
• /
• 한국공간정보시스템학회 2005년도 GIS/RS 공동 춘계학술대회
• /
• pp.369-374
• /
• 2005

정사영상 생성, 도시 공간의 모형화 등 도면화의 다양한 응용분야에 적용을 위해서는 위성 영상으로부터 수치고도모형을 생성하는 것은 중요하며, SPOT-5, IKONOS, QUICKBIRD, ORBVIEW 등의 고해상도 위성영상은 효율적이고 경제적으로 수치고도모형을 생성할 수 있는 정보를 제공하고 있다. 그러나, 이들 고해상도 위성영상으로부터 수치고도모형을 생성하기 위해서는 센서모형화, 에피폴라 영상 생성 그리고 영상정합에 대한 사전지식이 필요하다. 이들 중 에피폴라 영상생성은 중요한 인자이며 이에 대한 연구는 아직 미흡한 실정이다. 뿐만 아니라, IKONOS 위성영상으로부터 수치고도모형을 생성하는 연구는 다항식비례모형에 기반한 연구가 주로 이루어졌다. 이에 본 연구에서는 센서 독립적이면서 적은 수의 기준점만으로 센서모형화와 에피폴라 영상생성이 가능한 평행투영모형을 이용하여 수치고도모형을 생성하는 일련의 처리과정을 새롭게 제안하였다. 제안된 방법론은 IKONOS 위성영상을 이용하여 적용하고 평가하였다.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2006년도 춘계학술발표회 논문집
• /
• pp.119-124
• /
• 2006

The world which based on knowledge and information is changing significantly. In the various knowledge and information, the importance of GSIS has increased for efficient application and management of country. The Geomatics has made a change rapidly, observation methods have improved too. The existing acquisition of Geoinformation depend on aerial photogtaphs, but new technology Jike application of high resolution satellite images. SAR and LiDAR, is the fastest. especially, LiDAR surveying is most advanced active observation technology and Geoinfomtation is acquired by reflection of its laser pulse. In this study. the position accuracy of extracted building from LiDAR was evaluated by GPS surveying, then each data was made comparison between LiDAR's and GPS's data. After processing. the result of this study will be suggested basic data about application.

• Korean Journal of Geomatics
• /
• 제3권1호
• /
• pp.43-51
• /
• 2003

This paper presents the benefits of using close-range digital photogrammetric techniques for measuring the roughness of rock surfaces, using digital stereo images obtained from a Rolleiflex 6006 metric camera. To precisely measure surface roughness, we researched on how to use the flat and curved reference surface obtained from geometrically corrected digital images of the rock surface by using the least squares method. To test the precision of the proposed technique, the surface roughness has been measured between the reference surface and sample areas of very smooth-surfaced rock. Then the results were compared with the measurements obtained from a laser sensor profilometer.

• Korean Journal of Geomatics
• /
• 제3권2호
• /
• pp.115-122
• /
• 2004

NASA, NSF and USGS jointly conducted airborne LIDAR surveys to acquire numerous surface points with high densities over the Antarctic Dry Valleys and its vicinity, The huge set of these points retains two characteristics undesirable for DEM generation, which are unusually high blunder ratio and large variation of the local point densities. Hence, in order to not only reduce the undesirable effects due to these characteristics but also process the huge number of points within reasonable limits of time and resources, we developed an efficient, robust, nearly automatic approach to DEM generation. This paper reports about the application of this approach to generating high-resolution precise DEMs from the Antarctic LIDAR surveys and the evaluation of their accuracy.

• Korean Journal of Geomatics
• /
• 제3권2호
• /
• pp.107-114
• /
• 2004

The National Geographic Information Institute (NGII) in korea, through the National Geographic Information System (NGIS) Program, has prepared to generate and disseminate digital elevation data for Korea. This is a pilot research to propose a policy for production, maintenance, and supply of Korea Digital Elevation Data(KDED). Customer demands for accuracy and resolution of DEM was surveyed through a questionnaire. In order to investigate the quality, the technical efficiency and the production cost, a tentative DEM in a small test site was generated based on digital topographic maps (original paper map scale 1:5,000), analytical plotter, and LIDAR. The Accuracy standard for KDED was derived based on source data generation methods. As a result of this research, a uniformly spaced grid model was recommended for KDED. Its preferable grid space is 5m in urban areas and its vicinity, and 10m in field and mountainous area. LIDAR has been valuated as a proper KDED generation method fulfilling customers' demands for the accuracy.

• Korean Journal of Geomatics
• /
• 제3권2호
• /
• pp.123-128
• /
• 2004

As the applied fields of GIS are expanded to the transportation, developing internet-based applications for transportation information is getting attention increasingly. Most applications developed so far are primarily focused on guidance systems for owner-driven cars. Although some recent ones are devoted to public transportation systems, they show limitations in dealing with the following aspects: (i) people may change transportation means not only within the same type but also among different modes such as between buses and subways, and (ii) the system should take into account the time taken in transfer from one mode to the other. This study suggest the framework for developing a public transportation guidance system that generates optimized paths in the transportation network of mixed means including buses, subways and other modes. For this study, the Genetic Algorithms are used to find the best routes that take into account transfer time and other service-time constraints.

• Korean Journal of Geomatics
• /
• 제3권2호
• /
• pp.93-98
• /
• 2004

Fast urbanization and industrialization have resulted in rapid changes in the urban environment. For effective monitoring and management of these changes, a new surveying methodology that is more inexpensive and timely than the conventional remote sensing system if required. This paper proposes an unmanned airship videographic system capable of acquiring stable video. In addition, it presents approaches to constructing a prototype facilities management system based on VideoGIS, which links GIS functions and video data to provide actual spatiotemporal information.

• Korean Journal of Geomatics
• /
• 제3권1호
• /
• pp.53-57
• /
• 2003

As the Korea Multi-Purpose Satellite-I (KOMPSAT-1) satellite can roll tilt up to $\pm$45$^{\circ}$, we have analyzed some KOMPSAT-1 EOC images taken at different tilt angles for this study. The required ground coordinates for bundle adjustment and geometric accuracy are obtained from the digital map produced by the National Geography Institution, at a scale of 1:5,000. Followings are the steps taken for the tilting angle of KOMPSAT-1 to be present in the evaluation of geometric accuracy of each different stereo image data: Firstly, as the tilting angle is different in each image, the characteristic of satellite dynamic must be determined by the sensor modeling. Then the best sensor modeling equation should be determined. The result of this research, the difference between the RMSE values of individual stereo images is mainly due to quality of image and ground coordinates instead of tilt angle. The bundle adjustment using three KOMPSAT-1 stereo pairs, first degree of polynomials for modeling the satellite position, were sufficient.

• Advances in materials Research
• /
• 제8권4호
• /
• pp.313-335
• /
• 2019

The objective of the present paper is to investigate the bending and free vibration behavior of functionally graded material (FGM) sandwich rectangular plates using an efficient and simple higher order shear deformation theory. Unlike other theories, there are only four unknown functions involved, as compared to five in other shear deformation theories. The most interesting feature of this theory is that it does not require the shear correction factor. Two common types of FGM sandwich plates are considered, namely, the sandwich with the FGM facesheet and the homogeneous core and the sandwich with the homogeneous facesheet and the FGM core. The equation of motion for the FGM sandwich plates is obtained based on Hamilton's principle. The closed form solutions are obtained by using the Navier technique. A static and free vibration frequency is given for different material properties. The accuracy of the present solutions is verified by comparing the obtained results with the existing solutions.