• 지질공학
• /
• 제16권4호
• /
• pp.359-371
• /
• 2006

이 연구는 산사태가 발생한 편마암류, 화강암류 및 제3기퇴적암류지역 자연사면의 토층을 대상으로 여러 토질시험을 실시하여 산사태에 영향을 미치는 토층사면의 토질특성을 고찰하였다. 이를 위하여 같은 시기에 집중호우로 인해 많은 산사태들이 발생되었던 지역으로 편마암류인 장흥지역, 화강암류인 상주지역 및 제3기퇴적암류인 포항지역의 산사태현장 및 그와 대비되는 곳의 토층으로 부터 채취한 시료에 대해 물성 및 공학시험을 실시하였다. 산사태자료와 시험결과를 토대로 산사태지역의 토질측성을 파악하고 발생지역과 미발생지역간의 차별성을 분석하였다. 지질별로 다소의 차이는 있으나 산사태발생지역의 토층은 미발생지역에 비해 균등계수와 곡률계수가 더 크고 세립자의 함유비율이 더 높다. 액성한계는 거의 유사한 경향성을 보이나 소성한계는 다른 두 지질에 비해서 편마암이 상대적으로 더 크게 나타났으며, 산사태발생지역의 토층이 더 낮은 연경도를 갖는다. 함수비는 다른 두 지질에 비해서 제3기퇴적암류가 훨씬 큰데, 이는 모암의 광물조성과 토층의 구조 및 풍화양상 등 다양한 토질요소에 영향을 받는다. 3개 지질조건 모두에서 산사태발생지역의 토층이 미발생지역에 비해서 대체로 큰 간극율과 작은 밀도특성을 갖는데, 이는 산사태발생지역의 토층이 미발생지역에 비해 더 불량한 입도분포와 느슨한 지반상태에 있음을 보여주는 것으로, 간극율이 크고 밀도가 작은 토층에서 산사태가 더 쉽게 발생될 수 있음을 의미한다. 그리고 동일한 지질조건인 경우 투수성이 양호한 토층이 산사태에 더 취약한데, 투수성은 입도분포, 간극크기, 흙입자의 거칠기 및 구조 등의 토질특성과 풍화나 퇴적환경 등 지질성인에 영향을 받는다. 한편, 전단특성은 지질조건에 따라 다소의 차이는 있으나 특별하게 구분되지는 않는다. 그러나 모든 지질조건에서 산사태발생지역의 토층이 미발생지역에 비해 전단저항각이 더 작은 것으로 나타남으로써 동일한 지질조건인 경우 전단저항각이 큰 토층은 작은 토층에 비해 산사태에 더 안정한 지반으로 분류된다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.168.2-168.2
• /
• 2010

The growing market for geothermal heat pump system requires great consideration of quality control and assurance in design and construction. The borehole heat exchanger of GHP system should be sustainable, economical and ecological. Thermal Response Test (TRT) is a useful method for site investigation to obtain reliable data for a optimal system design from the technical and economical aspect. Intensive researches combined with exchange of experiences on an international level within the IEA ECES Annex 21 improved the technology. Major subjects on the interpretation of TRT are development of improved evaluation models, evaluation of the TRT with respect to geological layers and investigation of the influence of ground water. Current status of TRT in South Korea, as well as a new version of the Korean TRT standard test procedure was presented. TRT is mostly used for governmental supported projects with corresponds to more than 100 GCHP systems per year. More than 200 tests are applied, mostly on single U-tube heat exchangers (about 95%). Bentonite is the most common grouting to be used. KIGAM (Korea Institute of Geoscience & Mineral Resources) is also keeping a GIS geological and geothermal database. In the institute also laboratory measurements of rock properties are carried out. About 90% of the laboratory measurements of the rock heat conductivity shows higher values than the in-situ TRT.

• Ocean Science Journal
• /
• 제41권3호
• /
• pp.149-161
• /
• 2006

The aims of this study are 1) to construct a database using geostatistics and Geographic Information System (GIS), and 2) to derive the spatial relationships between manganese nodule abundance and other geological factors such as metal grade, slope, water depth, topography, and acoustic characteristics of the sub-bottom. Using GIS, it is possible to analyze a large amount of data efficiently, and to maximize the practical application, to increase specialization, and to enhance the accuracy of the analyses. The greater the copper and nickel grade, the higher the rating. The distribution pattern of nickel grade is similar to that of copper grade. The slopes are generally less than $3^{\circ}$ except for seamounts and cliff areas. The rating shows no correlation with slope. The rating is highest for slopes between 2.5 and $3.5^{\circ}$ in block N1 and between 4.0 and $4.5^{\circ}$ in block N3. The topography is classified into five groups: seamount, hill crest, hill slant, hill base or plain, and seafloor basin or valley. The rating proves lowest for seamount and hill crest. Our results show that the rating increases with the water depth in the study area. Nodule abundance dose not show any significant relationship with the thickness of the upper transparent layer in the study area.

• 자원환경지질
• /
• 제33권2호
• /
• pp.117-128
• /
• 2000

Regional evaluations of slope stability by the failure criterion and by environmental geological factors were conducted. The failure criterion is the general conditions for plane failure which consider the geometrical conditions between geological discontinuities and topographical slope planes. The factor focused in this condiction is dip and dip direction. Geostatics, named semivariogram was used for establishing structural domains in slope stability evaluation by the failure criterion. The influential range was calculated to 6 km in the case of dip direction of dominant joint set and 7 km in the case of dip of the same dominant joint set. Then applying this failure criterion to the study area produced a slope stability map using the established domains and slopes generated by TIN module of ARC/INFO GIS. This study considered another regional slope stability analysis. 5 failure-driven factors 9the unstable slope map, geology, engineering soil, groundwater, and lineament density) were selected and used as data coverages for regional slope stability evaluation by geoenvironmental factors. These factors were weighted and overlayed in GIS. From the graph of cumulatave area (%) and instability index, finding critical points classified the instability indices. The most unstable slopes are located in the southern area of Mt. Eorae, Dabul-ri, and the eastern area of Junkok-ri in the first area is plane failure. Also, the expected orientations of failure are 59/338 and 86/090 (dip/dip direction).

• 한국항공운항학회지
• /
• 제26권3호
• /
• pp.1-8
• /
• 2018

Aviation industry is growing rapidly, and this growth is expected to continue. However, aircraft accident rate is still high, and 65 percent of accidents occur during landing phase due to unstable approach. Therefore, this research analyzed causes and countermeasures of unstable approach. In order to derive countermeasures, this study selected P International Airport as an example case. In addition, this research analyzed A airline's FOQA data, regional Standard Operating Procedures, and 5 years of environmental factors to identified correlation of those contributing factors. In conclusion, his research concluded following results. First of all, because of P International Airport's geological features, pilots are required to conduct Circling Approach, and this advanced maneuver increases workload at the final stage of flight. Secondarily, meteorological factors such as crosswind, seasonal rain front, local visibility contributes unstable approach. Lastly, these geological and meteorological factors are interrelated, and this uncommon environment can decrease circumstantial judgement ability of pilots and jeopardize aviation safety. As a consequence, it is recommended to reinforce the Crew Resource Management and Threat & Error Management systems so that pilots can perceive identical safety target.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.285-292
• /
• 2004

Earth Anchor method as a supporting system is widely used in the large scale deep excavation of urban areas or slope excavation project. Considering the application frequency of that method and catastrophe of that method under unproper construction management, we can find out many problems relevant to the domestic design and construction management of earth anchor method. When we encounter the cases of rapid increments and various decrements in earth anchor axial forces, considering the characteristic of earth anchor method, it is an essential point to catch the reasons and to prepare countermeasures. This article introduces two actual monitoring examples based on the close analyses of measured data in a typical large scale deep excavation project and slope excavation project. One is a rapidly increasing case of earth anchor axial forces with the continuous advance of incremental deformation in a geological layer interface. And another is a decreasing case of earth anchor axial forces with the construction conditions. The effort of this article aims to improve and develop the technique of design and construction in the coming projects having similar ground condition and supporting method.

• International Union of Geodesy and Geophysics Korean Journal of Geophysical Research
• /
• 제25권1호
• /
• pp.23-34
• /
• 1997

Seismic tomography using the graph theoretical method of ray tracing is performed in two synthetic data sets with laterally varying velocity structures. The straight-ray tomography shows so poor results in imaging the laterally varying velocity structure that the ray-traced tomographic techniques should be used. Conventional ray tracing methods have serious drawbacks, i.e. problems of convergence and local minima, when they are applied to seismic tomography. The graph theretical method finds good approximated raypaths in rapidly varying media even in shadow zones, where shooting methods meet with convergence problems. The graph theoretical method ensures the globally minimal traveltime raypath while bending methods often cause local minima problems. Especially, the graph theoretical method is efficient in case that many sources and receivers exist, since it can find the traveltimes and corresponding raypaths to all receivers from a specific source at one time. Moreover, the algorithm of graph theoretical method is easily applicable to the ray tracing in anisotropic media, and even to the three dimensional case. Among the row-active inversion techniques, the conjugate gradient (CG) method is used because of fast convergence and high efficiency. The iterative sequence of the ray tracing by the graph theoretical method and the inversion by the CG method is an efficient and robust algorithm for seismic tomography in laterally varying velocity structures.

• 한국환경과학회지
• /
• 제25권9호
• /
• pp.1311-1322
• /
• 2016

Since the scale and disaster characteristics of volcanic eruptions are determined by their geological features, it is important not only to grasp the current states of the volcanoes in neighboring countries around the Korean Peninsula, but also to analyze the tectonic settings, tectonic regions, geological features, volcanic types, and past eruptional histories of these volcanoes. We created a database of 285 volcanoes around the Korean Peninsula, and then identified a high-risk groups of 29 volcanoes that are highly likely to affect the region, based on conditions such as volcanic activity, the type of rocks at risk of eruption, the distance from Seoul, and high VEI (volcanic explosivity index). In addition, we identified the 10 volcanoes that should be given the highest priority. We selected them through an analysis of data available in literature, such as volcanic ash dispersion results from previous Japanese eruptions, the definition of a large-scale volcano used by Japan's Cabinet Office, and examination of cumulative magma layer volumes from Japan's quaternary volcanoes.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2003년도 총회 및 춘계학술발표회
• /
• pp.73-76
• /
• 2003

SF$_{6}$ (Sulfur Hexafluoride) is a gaseous compound whose use is being greatly increased recently. The compound has a negligible background concentration from natural sources and is stable in most of groundwater environments. Therefore, SF$_{6}$ has potential for a dating tool for young groundwater. It has many advantages over chlorofluorocarbons (CFCs) for groundwater investigation that sampling procedure is much simpler than CFCs and its growth is continued up to at least near future in the atmosphere. However, solubility of SF$^{6}$ is so low that excess air causes large uncertainties in recharge date of groundwater. To compensate the limitation, $N_2$/Ar method can be employed to estimate excess air content. A groundwater study is currently carrying out in Jeju Island using SF$_{6}$ as an environmental tracer, Well waters and spring waters were sampled for SF$_{6}$ and $N_2$/Ar. To establish SF$_{6}$ input history in the study area, air sampling is being conducted in the area near the center of the island on a monthly and weekly basis. Based on the present data, the level of SF$_{6}$ concentration in the atmosphere of the Island is corresponding to the trend of the Northern Hemisphere.

• 지질공학
• /
• 제17권4호
• /
• pp.615-621
• /
• 2007

하상토의 부존량을 경제적으로 파악하는데 효과적일 것으로 예상되는 굴절법탄성파탐사를 상이한 토질의 2개소에 적용하였다. 대상지역은 용인시 월촌교 인근 제방 및 예천군 담암제이며 총 10측선의 굴절법탄성파탐사가 수행되었다. 아울러 역산된 탄성파단면상에서 지층을 구분하기 위해 2개의 시추조사가 병행되었다. 취득된 탐사자료를 역산하여 지층을 구분하고 고도 측량자료와 각 지점별 토사층 심도를 내삽한 결과 각각 $24,000m^3$ 및 $56,000m^3$로 하상토의 부존량 추정이 가능하였다.