• 자원환경지질
• /
• 제33권6호
• /
• pp.547-556
• /
• 2000

The purpose of this study is to analyze shear fracture system using landslide location occurred 1998 at Janghung area. For the geological implication, foliation was surveyed and analyzed, and location of landslide, geological structure and topography were constructed into spatial database using GIS. With the constructed spatial database, shear fracture system was assessed by the relation analysis between strike and dip of the foliation and aspect and slope of the topography. We compared strike and dip of foliation and aspect and slope of topography and recognized the typical fracture pattern, strike and dip of joint, that coincided with shear fracture system. The result tells us that foliation of gneiss has geometrical relation to joint or fault that leading landslide. GIS was used to analyze vast data efficiently and the result can be used to assess the landslide susceptibility as important factor.

• 자원환경지질
• /
• 제17권4호
• /
• pp.315-320
• /
• 1984

The newly discovered minerals found during 30 years have been discovered with election microprobe analysis, and several other new minerals have been described largely on the basis of probe analysis. Widely used types of instrument are the wavelength dispersive spectrometer (WDS) and the energy dispersive Spectrometer (EDS), with emitted X-ray dispersed by a curved crystal that is arranged to satisfy the Bragg equation ($n{\lambda}=2dsin{\theta}$). Atomic Nos of Z 4 to 92 can be analyzed quantitatively if they present in amount exceeding 50~100ppm. The application of the microprobe in mineralogical and geological research is quantitative chemical analysis of grains as small as a few microns in diameter, individual grains in a rock or can be analyzed in thin section and polished section, analysis can be made comparatively short time, methods in non-destructure, to photographical and crystallographical information. This paper was written in order to document data evaluation procedure for quantitative energy dispersive election probe analysis.

• 자원환경지질
• /
• 제27권3호
• /
• pp.313-321
• /
• 1994

Structural interpretation by using subsurface attitude of coal seam and outcrop patterns of folds and faults shows that wrench and thrust tectonics took place simultaneously in the study area. From the interference patterns of fold axes, three generations of folding are suggested: $F_1$ (NE-SW), $F_2$ (N-S), and $F_3$ (E-W). Differential displacement of rock mass from north to south yields to E-W fold and Osypcheon Fault. Geometry of subsurface coal seam show different patterns comparing to those of surface outcrop because of shallow-depth crustal shortening which took place post Cretaceous.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2008년도 International Symposium on Remote Sensing
• /
• pp.66-67
• /
• 2008

Most mineral resources are located in subsurface but mineral exploration starts with a step of investigation in wide-area to find evidence of buried ores. Conventional technique for exploration on wide-area as a preliminary survey is an observation using naked eyes by geologist or chemical analysis using lots of samples obtained from target area. Hyperspectral remote sensing can overcome those subjective and time consuming survey and can produce mineral resources distribution map. Precise resource map requires information of mineral distribution in a subpixellevel because mineral is distributed as rock components or narrow veins. But most hyperspectral data is composed of pixels of several meters or more than ten meters scale. We reviewed subpixel unmixing algorithms which have been used for geological field and tested detection ability with Hyperion imagery, geological map and seven spectral curves of mineral and rock specimens which were obtained from study areas.

• 디지털산업정보학회논문지
• /
• 제12권1호
• /
• pp.27-33
• /
• 2016

In this study we propose a method for 3D landform reconstruction and object modeling method by generating contour lines on the map using a depth sensor which abstracts characteristics of geological layers from the depth map. Unlike the common visual camera, the depth-sensor is not affected by the intensity of illumination, and therefore a more robust contour and object can be extracted. The algorithm suggested in this paper first abstracts the characteristics of each geological layer from the depth map image and rearranges it into the proper order, then creates contour lines using the Bezier curve. Using the created contour lines, 3D images are reconstructed through rendering by mapping RGB images of the visual camera. Experimental results show that the proposed method using depth sensor can reconstruct contour map and 3D modeling in real-time. The generation of the contours with depth data is more efficient and economical in terms of the quality and accuracy.

• 자원환경지질
• /
• 제24권1호
• /
• pp.71-79
• /
• 1991

Anisotropy of magnetic susceptibility (AMS), directional variation of susceptibility in a sample, indicates the relative magnitude and orientation of preferentially aligned magnetic grains in a rock sample and represents important aspects of rock fabrics. This observation leads to various studies which applied the AMS technique to numerous geological problems, especially sedimentology, petrology, structural geology, and tectonics. Since AMS is, relative to conventional methods of petrofabric measurement, quickly measured, easily interpretated, and providing quantitative data, AMS technique has evolved into a powerful tool for detection of rock fabrics and continues to draw the interest of non-specialists as well as magnetists. This paper represents the theory, techniques, and parameters of the relatively new AMS method for estimating petrofabrics and their various applications.

• 자원환경지질
• /
• 제25권1호
• /
• pp.17-25
• /
• 1992

South ore deposits of the Dunjeon gold mine is a fissure-filling vein emplaced in the Cretaceous granodiorite, skarnized and/or hornfelsified Ordovician Dumudong Formation. Mineralization can be divided into three distinct depositional stages on the basis of vein structure and mineral assemblages. Sb, Bi sulfosalts minerals, such as tetrahedrite, bournonite, boulangerite, cosalite, lillianite, heyrovskyite, unknown Pb-Bi-Sb-S mineral, native Sb, native Bi and Au-Ag minerals are mainly deposited in stage II. The formation temperature and sulfur fugacties of Sb, Bi minerals in the stage II deduced from thermodynamic considerations are from $172^{\circ}$ to $378^{\circ}C$ and $10^{-10.6}$ to $10^{-19.4}$ atm. Those temperatures are good agreement with temperature data obtained by fluid inclusion study which has reported already.

• Geomechanics and Engineering
• /
• 제4권1호
• /
• pp.19-37
• /
• 2012

This paper presents the results of analytical and numerical analyses of the effects of performing a pressuremeter test or driving a pile in clay. The geometry of the problem has been simplified by the assumptions of plane strain and axial symmetry. Pressuremeter testing or installation of driven piles has been modelled as an undrained expansion of a cylindrical cavity. Stresses, pore water pressures, and deformations are found by assuming that the clay behaves like normally consolidated modified Cam clay. Closed-form solutions are obtained which allow the determination of the principal effective stresses and the strains around the cavity. The analysis which indicates that the intermediate principal stress at critical state is not equal to the mean of the other two principal stresses, except when the clay is initially isotropically consolidated, also permits finding the limit expansion and excess pore water pressures by means of the Almansi finite strain approach. Results are compared with published data which were determined using finite element and finite difference methods.

• 화약ㆍ발파
• /
• 제19권3호
• /
• pp.91-104
• /
• 2001

As in Korean environments with mountainous and hilly areas, the rock generally has to be removed in construction or civil engineering work in tunnelling or excavation for development in urban area. Explosives should be used for blasting, which may cause serious problems on local people for their claim for compensation due to ground vibration, noise. For safe and economic blasting, geology and engineering characteristics of rocks such as discontinuities of rock or weathering are very important factors, together with site characteristics for prediction of ground vibration. In this study, conducted were the detailed study for major rocks most widely distributed in the South-east area, in-situ geological survey, geological and geochemical analysis, and further laboratory uniaxial rock stress, seismic velocity of core samples together with in-situ seismic velocity measurements. Regulations on ground vibration and noise were reviewed for assessing their adaptabilities, and a total of 4,856 measured blasting vibration data were examined for enhancing the confidence level in estimating the predictive formulation using scaled distance statistically.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2008년도 International Symposium on Remote Sensing
• /
• pp.196-199
• /
• 2008

Lineament is defined generally as a linear feature or pattern on interpretation of a satellite image and indicates the geological structures such as faults and fractures. For this reason, a lineament extraction and analysis using remote sensing images have been widely used for mapping large areas. The Gyeong-gang Fault is a NNE trending structure located in Gangwon-do and Kyeonggi-do district. However, a few geological researches on that fault have been carried out and its trace or continuity is ambiguous. In this study, we investigate the geologic features at Gyeong-gang Fault Zone using LANDSAT ETM+ satellite image and SRTM digital elevation model. In order to extract the characteristics of geologic features effectively, we transform the LANDSAT ETM+ image using Principal Component Analysis (PCA) and create a shade relief from SRTM data with various illumination angles. The results show that it is possible to identify the dimensions and orientations of the geologic features at Gyeong-gang Fault Zone using remote sensing data. An aerial photograph interpretation and a field work will be future tasks for more accurate analysis in this area.