• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.462-471
• /
• 2008

The quality control for DCM is based on the unconfined compressive strength of laboratory treated soils, the cement contents, setting and checking the strength of in-situ treated soils. Also the strength of in-situ is checked mainly by the core boring. In case of large size construction, it might be considered the distribution of DCM strength data as normal distribution, so it might be employed a statistical method to evaluate DCM strength easily. In Japan, it has been established correlation between the strength of laboratory treated soils, the strength of in-suit treated soil and the design strength. Also It has been employed domestically the correlation suggested by Japan. But the correlation, so called $\lambda$(ratio in the strength of laboratory treated soils and the in-suit) and $\gamma$(ratio in the strength of in-suit and the design strength), might be far different with the domestic due to different DCM system and soil properties. so it might be restrictive to use domestically. Therefore in this paper, It is presented correlation between the strength of laboratory treated soils and in-suit treated soil to be employed domestically by evaluating $\lambda$ based on the domestic in-suit illustrations.

• 한국지반환경공학회 논문집
• /
• 제24권8호
• /
• pp.13-20
• /
• 2023

지반이상대 구간을 지나는 터널은 시공 중 또는 시공 후 지반융기, 균열, 전단 파괴 등의 이상변위 발생이 많이 보고되고 있다. 이러한 이상변위가 지속되거나 큰 경우에는 최종적으로 터널 붕괴위험의 우려가 있으며, 다양한 보강공법을 사용하여 터널 붕괴위험을 저감시키고 있다. 본 연구에서 살펴본 터널은 막장이 완전 풍화상태가 주를 이루며 부분적으로 심한 풍화상태로 분포하는 구간에 시공되었다. 시공 중 터널 내공변위를 침범하여 강지보 및 숏크리트를 재시공하였으며, 기존 설치된 flat형 인버트의 제거없이 현 상태에서 라이닝 철근 보강공법을 적용하였다. 이러한 보강공법을 적용 후 실시한 계측 자료를 바탕으로 바닥의 융기 가능성 구간에 대하여 수치해석적인 방법으로 장기변위 예측을 통해 터널의 장기적인 안정성을 검토하였다.

• Geomechanics and Engineering
• /
• 제35권6호
• /
• pp.647-663
• /
• 2023

The investigation of the disc cutter wear prediction has an important guiding role in TBM equipment selection, project planning, and cost forecasting, especially when tunneling in a long-distance rock formations with high strength and high abrasivity. In this study, a comprehensive database of disc cutter wear data, geological properties, and tunneling parameters is obtained from a 1326 m excavated metro tunnel project in leptynite in Shenzhen, China. The failure forms and wear consumption of disc cutters on site are analyzed with emphasis. The results showed that 81% of disc cutters fail due to uniform wear, and other cutters are replaced owing to abnormal wear, especially flat wear of the cutter rings. In addition, it is found that there is a reasonable direct proportional relationship between the uniform wear rate (WR) and the installation radius (R), and the coefficient depends on geological characteristics and tunneling parameters. Thus, a preliminary prediction formula of the uniform wear rate, based on the installation radius of the cutterhead, was established. The correlation between some important geological properties (K_V and UCS) along with some tunneling parameters (F_n and p) and wear rate was discussed using regression analysis methods, and several prediction models for uniform wear rate were developed. Compared with a single variable, the multivariable model shows better prediction ability, and 89% of WR can be accurately estimated. The prediction model has reliability and provides a practical tool for wear prediction of disc cutter under similar hard rock projects with similar geological conditions.

• 한국농공학회논문집
• /
• 제46권5호
• /
• pp.117-127
• /
• 2004

A risk analysis on the cutting slope of roads near Cheongju area was carried out with the data from geological map, field investigation, and laboratory test and with the Geographic Information System. A risk analysis method on the cutting slope of road using the Geographic Information System was developed with the data from geological map, field investigation and laboratory tests. In the GIS, road factors which are safety factor, class of road, slake index, slope-protection works, and height of slope in the cutting slopes are classified into some ranks, and their weighting factors were taken into account. This method can be applied effectively to a road management.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2009년도 특별 심포지엄
• /
• pp.47-56
• /
• 2009

Proper reservoir characterization is an integral part of formation evaluation, reserve estimation and planning of field development. Seismic inversion is a widely employed reservoir characterization tool that provides various rock properties of reservoir intervals. This study presents results of the inversion studies including Geostatistical Inversion carried out on the gas fields, offshore Myanmar. Higher resolution and multiple models can be produced by Geostatistical Inversion using input data such as pre-stack seismic data, well logs, petrophysical relationships and geological inferences for example reservoir shape and lateral extent. Detailed reservoir characterization was required for the development plan of gas fields, and the Geostatistical Inversion studies served as a basis for integrated geological modeling and development well planning.

• 지질공학
• /
• 제11권2호
• /
• pp.131-139
• /
• 2001

최근까지 석회암 매장량 산출은 주로 지질조사와 시추에 의존하여 계산하여 왔다. 본 연구에서는 매장량 계산을 위하여 탄성파 및 전기탐사법을 적용하여 석회암 매장량 산출의 기초자료를 얻고자 하였다. 탄성파 반사법을 이용하여 기반암의 깊이를 계산하고, 전기 비저항 탐사법을 이용하여 석회암의 지층경계면을 조사하였다. 탐사결과 기반암의 깊이는 약 17m이며 지층경계면은 지질조사에 의한 경계면과 약간의 차이를 보여주었다.

• 대한원격탐사학회지
• /
• 제1권1호
• /
• pp.39-51
• /
• 1985

The study was emphasized on application of the digital image processing techniques for lineament analysis. The major lineament of the study area belongs to Choogaryong faults which many geologists have studied since 1903. Also the lineament is so significant in geological views, because the lineament runs through Seoul area. The several image processing methods such as gradient, Laplacian and spatial filter have been applied, and the spatial filtering is most suitable method for lineament analysis among them. The lineaments distribute predominently in the N20.deg.-30.deg.E trend and N80.deg.-90.deg.W trend which have the conjugated relationship each other, and it coincides with the Gyeongsang conjugate system. The circular structure of study area was developed by cooling circular joint.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.325-328
• /
• 2005

To estimate presumptive local ground subsidence area near Abandoned Under ground Coal Mine(AUCM) at Samcheok city in Korea, the geological properties of existing ground subsidence area and the geophysical prospecting data were analyzed using GIS. The electrical resistivity survey and seismic reflection survey database were constructed from investigation reports and factors which are related with ground subsidence such as geological map, topological map, land use map, lineament map, groundwater level, RMR (Rock Mass Rating), mining tunnel map and slope database were constructed also to make a comparative study of each parameters. As a result of the spatial analysis of existing ground subsidence area, 9 major factors causing ground subsidence were extracted and a connection between the structure of underground and the ground subsidence was determined from the analysis of geophysical prospecting data. The estimation of presumptive ground subsidence area was performed using the correlation between the result from neural network analysis of 9 factors and the scrutiny of geophysical prospecting data.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2004년도 추계학술발표회 논문집
• /
• pp.143-152
• /
• 2004

Researchers seeking geological and environmental information, depend on remote sensing and aerial photographic datum from various commercial satellites and aircraft. However, adverse weather conditions as well as equipment expense limit the ability to collect data anywhere and anytime. To allow for better flexibility in geological and environmental data collection, we have developed a compact, multi-spectral automatic Aerial Photographic system (PKNU2). This system's Multi-spectral camera can record visible (RGB) and infrared (NIR) band (3032＊2008 Pixels) images Visible and infrared band images were obtained from each camera respectively and produced color-infrared composite images to be analyzed for the purpose of the environmental monitoring. However this did not provide quality data. Furthermore, it has the disadvantage of having the stereoscopic overlap area being 60% unsatisfied due to the 12 seconds of storage time of each data The PKNU2 system in contrast, photographed photos of great capacity Thus, with such results, we have been proceeding to develop the advanced PKNU2 (PKNU3) system that consists of a color-infrared spectral camera that can photograph in the visible and near-infrared bands simultaneously using a single sensor, a thermal infrared camera, two 40G computers to store images, and an MPEG board that can compress and transfer data to the computer in real time as well as be able to be mounted onto a helicopter platform.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume I
• /
• pp.157-157
• /
• 2006